• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1203-1210
• /
• 2007

The multibeam surveillance radar is a state-of-art of 3D radar technology. It applies the stacked beam-on-received realized by a digital beamformer. In this paper, a method of a low target altitude extraction for multibeam surveillance radar in multipath environmental condition is proposed and investigated. The model of multipath propagation and radar generation produced from the low altitude target in multibeam surveillance radar and the nelder-mead simplex multipath reduction(NMSMR) method which enables a reliable low altitude target extraction in specular reflection situations are described. The proposed algorithm is simulated to confirm the effectiveness of proposed algorithm in accordance with a various of target altitudes and radar frequencies.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.63-64
• /
• 2015

Software-Defined Radar는 기본 레이다 하드웨어의 기능을 소프트웨어로 구현할 수 있게 하여 하드웨어의 재구성이 용이하므로 다양한 활용 목적에 따라 레이다 기능을 다양화할 수 있고, 개발기간과 비용을 줄일 수 있는 장점이 있다. 특히 소프트웨어의 유연성이 높아 레이다 주변 환경에 따라 레이다 신호처리 알고리듬을 쉽게 적용할 수 있다. 본 기고에서는 다중대역에서 다중모드로 운용할 수 있는 소프트웨어 기반의 레이다 플랫폼 개발에 대한 기술 배경과 개발 내용을 설명하였고, 다양한 활용 전망을 살펴보았다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.949-958
• /
• 2016

This paper presents the new development result of the multi-band, the multi-mode SDR(Software Defined Radar) platform. The SDR hardware platform is implemented by using the reconfigurable multi-band RF transceiver and antenna modules of S, X, and K-bands, and a programmable signal processing module. The SDR software platform is implemented by using the multi-mode waveform generation of CW, Pulse, FMCW, and LFM Chirp as well as the adaptable algorithm library of signal processing and open API software modules. Through the integrated test of the SDR platform, the operational performance was verified in real-time. Also, through the field-application test, the ground target and air-vehicle drone target were successfully detected and their test results were presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1090-1097
• /
• 2007

The multibeam surveillance radar is a state-of art of 3D radar technology. It applies the stacked beam-on-received realized by a digital beamformer. In this paper, a design concept of beamformer and a method of target altitude extraction for multibeam surveillance radar in the normal environmental condition considering no multipath situations are proposed and investigated. The extraction algorithm based on antenna sine space coordinated system in a FFT digital beamformer is described. The proposed algorithm is simulated by 1 look-up table data and confirmed to have consistent results in accordance with a variety of target altitudes and a full radar frequency range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.1
• /
• pp.33-41
• /
• 2017

This paper suggests a hand gesture recognition technology to control smart devices using multiple Doppler radars and a support vector machine(SVM), which is one of the machine learning algorithms. Whereas single Doppler radar can recognize only simple hand gestures, multiple Doppler radar can recognize various and complex hand gestures by using various Doppler patterns as a function of time and each device. In addition, machine learning technology can enhance recognition accuracy. In order to determine the feasibility of the suggested technology, we implemented a test-bed using two Doppler radars, NI DAQ USB-6008, and MATLAB. Using this test-bed, we can successfully classify four hand gestures, which are Push, Pull, Right Slide, and Left Slide. Applying SVM machine learning algorithm, it was confirmed the high accuracy of the hand gesture recognition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.377-387
• /
• 2016

Design of X-band frequency FMCW based imaging radar with multi-resolutions and performances of the self-manufactured radar system are presented in this study. In order to implement the multi-bandwidths, a ramp sequence of the FMCW signal is consisting of two kinds of 'saw-tooth' waveform with different bandwidth, and a receiver circuit consisting of L-band source and frequency converter circuit is used to effectively extract spectra of beat-frequency from the received signal of X-band frequency. The system setups for performance measurement of self-manufactured radar system are maximum output power of 35 dBm, sampling frequency of 1.2 MHz and sweep time of 1 ms. Then, the measured resolutions of the modulated signal having bandwidth of 500 MHz and 300 MHz in range & azimuth-direction are (0.28 m, 0.26 m) and (0.44 m, 0.27 m), respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1053-1058
• /
• 2021

This paper presents the multi-band mixer which converts a X-, K- and Ka-band adaptively by adjusting the gate-bias voltage of an active device. The proposed mixer presented a conversion loss of -10 dB at -0.8 V gate-bias voltage for X-band, a conversion loss of -9 dB at -0.3 V gate-bias voltage for K-band and for Ka-band, a conversion loss of -7 dB at -0.2 V gate-bias voltage under the LO power of +6.0 dBm. The 1dB compression point (P1dB) is +0.5 dBm for all band.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.223-228
• /
• 2009

Efficient service discovery mechanism is a crucial feature for a hybrid ad-hoc network supporting extension of a wireless ad-hoc network to the Internet. We propose an efficient cross-layer service discovery mechanism using non-disjoint multi-path source routing protocol for hybrid ad-hoc networks. Our scheme has advantages of multi-path routing protocol and cross-layer service discovery. Intuitively, it is not difficult to imagine that the cross-layer service discovery mechanism could result in a decreased number of messages compared to the traditional approach for handling routing independently from service discovery. By simulation, we show that faster route recovery is possible by maintaining multiple routing paths in each node, and the route maintenance overhead can be reduced by limiting the number of multiple routing paths and by maintaining link/node non-disjoint multi-path.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.43-56
• /
• 1997

다중 표적 추적(MTT:Multiple Target Tracking)은 한 개 또는 그 이상의 센서들을 사용하는 감시(sureillance) 시스템을 위해서 컴퓨터와 마찬가지로 주변상황을 해석하는데 없어서는 안되는 중 요한 요소이다. 레이다, IR(Infrared) 및 Sonar등과 같은 전형적인 센서 시스템들은 여러 가지 신호원 (sources): 문제의 표적, 레이다 지면 클러터(clutter)같은 후면잡음 또는 열잡음같은 내부 오차 요인 으로부터 측정치(measurement)를 만들어 준다. 다중표적용 추적방식의 목적은 센서가 제공하는 측 정 데이터들을 동일한 신호원으로부터 나온 여러 세트의 관측치(observations) 또는 트랙(track)으로 구분해내는 것이다. 이와 같이 일단 트랙이 구성되고 확정되면 후면잡음이나 허위표적을 제거할 수 있 도록 표적의 수를 추산하고 표적의 속도나 예상위치 및 표적의 종류와 기타특성을 계산해낼 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.52-56
• /
• 2006

This paper presents a cross-eye characteristics of multi-path wave scattering. Cross-eye method uses the phase differences of multi signals and is used fur electronic protection. When a signal is propagated from transmitter to receiver on the ground surface, direct wave and reflected wave signals are combined in front of the receiving antenna with different phases. To calculate and control the amplitude and phase of reflected signal, we have developed a cross eye electronic protection method for radar system and studied the variation of electric power density.