• The Journal of the Acoustical Society of Korea
• /
• v.17 no.1
• /
• pp.9-16
• /
• 1998

본 논문에서는 낮은 비트율 CELP 음성 부호화기의 장구간 예측기의 성능 향상 방 법을 제안한다. 비트율을 낮추기 위해서는 분석 구간의 길이가 길어져야하며 이에 따라 장 구간 예측기의 성능이 저하되어 장구간 예측 후에도 준 주기성 성분이 상당량 존재하므로 백색 잡음으로 구성된 통계 코드북만으로는 이를 모델링하기 어려워진다. 제안 방법에서는 다중 대역 필터와 다중 펄스열을 이용하여 한 번 더 필터링(이차 장구간 예측)함으로써 장 구간 예측 후의 신호가 통계 코드북에 적합한 백색 잡음 형태로 되도록 모델링한다. 제안된 방법의 성능을 평가하기 위해 4.8kbps 비트율로 양자화한 후, 기존에 제안된 같은 전송률의 MBCELP와 DoD-CELP와 비교하였다. 실험 결과 제안된 방법이 기존 부호화기들에 비해 주/객관적인 음질에서 우수한 성능을 보여준다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.353-356
• /
• 2001

본 논문은 수중 음향을 이용하여 다중경로(Multipath) 환경에서의 해저면 설치 수신기의 3차원 위치 추정 알고리즘을 제안한다. 해저면 설치 수신기의 위치 추정을 위해 기준 음원의 위치와 음원과 수신기 사이의 수평거리를 사용하며, 수평거리 산출 시 다중경로의 영향을 고려하기 위해 음선 이론 모델을 사용하여 음원과 수신기 사이의 수평거리를 추정한다. 또한 특이치 분해법(Singular Value Decomposition estimator; SVD)을 사용하여 설정된 3차원 위치 추정 문제의 최적해를 추정하며, 이를 사용하여 동해 해상 실험 자료를 분석한다. 논문의 연구 결과 제안된 해저면 설치 3원 위치 추정 알고리즘은 다중경로 환경에서도 좋은 성능을 나타냄을 알 수 있다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.211-215
• /
• 1995

명료하고 자연스러운 한국어 음성을 생성하기 위하여 다중대역 여기신호를 이용한 음성 합성 시스팀을 제안한다. 분석계에서는 켑스트럼 파라미터를 사용하여 유성/무성 판별 스펙트럼을 이용한 유/무성 구간 자동판별법을 제안하고, 현재 단순 임펄스와 백색잡음만으로도 구성된 음원과 간단한 유성/무성 판별로 구동되어지는 합성음의 음질상의 한계를 개선하기 위하여 합성계에서는 음질개선 방안으로 유성음 구동시 다중대역 여기신호를 도입하여 합성시 이용한다. 제안된 방법에 대한 청취실험을 한 결과, 유성음 부분 특히 잡음이 많이 섞여 있는 유성음화 마찰음과 모음의 천이부분 등에서 일반적으로 사용되고 있는 간단한 유성/무성 파라미터를 사용한 합성음에 비하여 다중대역 여기신호를 사용한 합성음의 명료도가 매우 우수함을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.780-783
• /
• 2012

Recently, the SoC industry mainly uses various multi-layered bus architectures. However, reckless use of bus layers may results in on-chip communication resources and waste of silicon area. This paper performs a quantitative analysis to compare the two de-facto on-chip buses and SNP. Through the performance estimation, the performance of SNP turns out to be significantly enhanced for asymmetric write and read traffic (non-central F distribution) while symmetric traffic is similar to that of AXI. More specifically, SNP properly places IP cores on the top or bottom, induces the write and read channels to be balanced, and achieves about twenty percent improved performance compared to AXI.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.365-373
• /
• 2008

We have succeeded in synthesizing vertically aligned thin multi-walled carbon nanotubes (VA thin-MWCNTs) by a catalytic chemical vapor deposition (CCVD) method onto Fe/Al thin film deposited on a Si wafers using an optimum amount of hydrogen sulfide ($H_2S$) additive. Scanning electron microscope (SEM) images revealed that the as-synthesized CNT arrays were vertically well-oriented perpendicular to the substrate with relatively uniform length. Transmission electron microscope (TEM) observations indicated that the as-grown CNTs were nearly catalyst-free thin-MWCNTs with small outer diameters of less than 10nm. The average wall number is about 5. We suggested a possible growth mechanism of the VA thin-MWCNT arrays. The VA thin-MWCNTs showed a low turn-on electric field of about $1.1\;V/{\mu}m$ at a current density of $0.1\;{\mu}A/cm^2$ and a high emission current density about $2.5\;mA/cm^2$ at a bias field of $2.7\;V/{\mu}m$. Moreover, the VA thin-MWCNTs presented better field emission stability without degradation over 20 hours (h) at the emission current density of about $1\;mA/cm^2$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.41-50
• /
• 2010

In this paper, a multi-band antenna with novel structure for mobile communications is designed and fabricated. The proposed antenna has the Multi-band antenna characteristics by two common-grounded slots with different size and angle. In order to reduce size and to enhance the gain of the antenna, a reflector is consisted of chokes on the three sides. It is optimized by using the CST Microwave Studio commercial software based on the FIA(Finite Integration Algorithm) and PBA(Perfect Boundary Approximation), and then the fabricating and measuring is practiced. As a result of measurement, the reflection coefficient is less than -11 dB(VSWR < 1.8) and the gain of antenna is more than 6dBi at 824~894MHz and 1885-2500MHz.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2271-2280
• /
• 1998

In this paper, we propose a method to retneve english written korcan names efficientl, and design a multilingual name retrieval system, It is very difficult to retrieve english-written korean names in typical IR sytems. For example, "홍길동" is written in english as vanous forms such like "Hong, gildong", "Gildong Hong", "Hong kil dong", "Hong kil dong" and so on, We not only propose a rule-based querv expansion method to retrieve english-written korean names efficiently but also design a multiligual name retneval system which is consisted of query classifier, exception handler, query expander, query executor, exception list and rulebase, Finally we will try to show that english-written korean names could be efficiently retrieved with rule based name generator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.97-105
• /
• 2015

Multiresponse optimization (MRO) seeks to find the setting of input variables, which optimizes the multiple responses simultaneously. The approach of weighted mean squared error (WMSE) minimization for MRO imposes a different weight on the squared bias and variance, which are the two components of the mean squared error (MSE). To date, a weighted sum-based method has been proposed for WMSE minimization. On the other hand, this method has a limitation in that it cannot find the most preferred solution located in a nonconvex region in objective function space. This paper proposes a Tchebycheff metric-based method to overcome the limitations of the weighted sum-based method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.50-57
• /
• 2003

Controlling rotorcraft to fly precisely through multiple, irregularly, and closely spaced waypoints is a common and practical mission. However, finding an optimal trajectory for this kind of mission is quite challenging. Usability of traditional approaches such as inverse control or direct methods to this kind of problem is limited because of either limitation on the specification of the constraints or requirement of extensive computation time. This paper proposes a method that can easily compute the full trajectory and control history for rotorcraft to pass through waypoints while satisfying other general constraints of states such as velocities and attitudes on each waypoint. The proposed method is applied to rotorcraft guidance problems of slalom and linear trajectory in the middle of general curved trajectory. The algorithm is test for various situations and demonstrates its usability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.871-877
• /
• 2008

It is important to investigate the relationship between weld process parameters and weld bead geometry for adaptive arc robot welding. Howeve, it is difficult to predict an exact back-bead owing to gap in process of butt welding. In this paper, the quantitative prediction system to specify the relationship external weld conditions and weld bead geometry was developed to get suitable back-bead in butt welding which is widely applied on industrial field. Multiple regression analysis for the prediction of process parameters was used as the research method. And, the results of the prediction method were compared and analyzed.