• Title/Summary/Keyword: 다소재

Search Result 721, Processing Time 0.022 seconds

Production of Digital Climate Maps with 1km resolution over Korean Peninsula using Statistical Downscaling Model (통계적 상세화 모형을 활용한 한반도 1km 농업용 전자기후도 제작)

  • Jina Hur;Jae-Pil Cho;Kyo-Moon Shim;Sera Jo;Yong-Seok Kim;Min-Gu Kang;Chan-Sung Oh;Seung-Beom Seo;Eung-Sup Kim
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.25 no.4
    • /
    • pp.404-414
    • /
    • 2023
  • In this study, digital climate maps with high-resolution (1km, daily) for the period of 1981 to 2020 were produced for the use as reference data within the procedures for statistical downscaling of climate change scenarios. Grid data for the six climate variables including maximum temperature, minimum temperature, precipitation, wind speed, relative humidity, solar radiation was created over Korean Peninsula using statistical downscaling model, so-called IGISRM (Improved GIS-based Regression Model), using global reanalysis data and in-situ observation. The digital climate data reflects topographical effects well in terms of representing general behaviors of observation. In terms of Correlation Coefficient, Slope of scatter plot, and Normalized Root Mean Square Error, temperature-related variables showed satisfactory performance while the other variables showed relatively lower reproducibility performance. These digital climate maps based on observation will be used to downscale future climate change scenario data as well as to get the information of gridded agricultural weather data over the whole Korean Peninsula including North Korea.

Depth-dependent Variations in Elemental and Mineral Distribution in the Deep Oceanic Floor Sediments (WP21GPC04) near the Mariana Trench in the Western Pacific Ocean (마리아나 해구에 인접한 서태평양 심해평원의 정점 WP21GPC04에서 수집된 해양 퇴적물의 깊이에 따른 원소 및 광물 분포 변화)

  • Junte Heo;Seohee Yun;Jonguk Kim;Young Tak Ko;Yongjae Lee
    • Economic and Environmental Geology
    • /
    • v.56 no.5
    • /
    • pp.581-588
    • /
    • 2023
  • This study reports depth-dependent elemental distribution and mineral abundance of the oceanic sediment sample (WP21GPC04) near the Mariana Trench collected during the WP21 expedition in 2021. The elemental distribution determined by μ-XRF shows no significant differences with varying depth, with an average SiO2 53.91 wt%, FeO 4.48 wt%, Al2O3 16.56 wt%, MgO 2.56 wt%, CaO 4.79 wt%, Na2O 3.52 wt%, K2O 5.48 wt%, similar to the average chemical composition of global subducting sediments (GLOSS). The mineral abundances analyzed using synchrotron XRD, however, vary with depth. While quartz, mica, and plagioclase were identified at all depths, chlorite was found at shallow depths, and zeolite group minerals, phillipsite and heulandite, showed a gradual change in phase fraction with depth. This suggests a change in sedimentation and alteration environments in the region, or the potential for coexistence emerges due to similar sediment stability. Overall, this study will provide a basis for the future investigations on the evolution of sedimentary environment near the Mariana Trench in the western Pacific Ocean and the phase distribution and the behavior of subducting oceanic sediments, which will affect the lithological and geochemical characteristics of the Mariana susduction system.

The Impact of Global Value Chains on Inflation: Focus on South Korea and China (글로벌 가치사슬이 인플레이션에 미치는 영향 분석: 한국과 중국을 중심으로)

  • Xiao-min Li;Ki-young Jeon
    • Korea Trade Review
    • /
    • v.48 no.4
    • /
    • pp.93-119
    • /
    • 2023
  • This study analyzes the impact of global value chain (GVC) participation on inflation in South Korea and China using OLS regression analysis. It compares the results before and after the global financial crisis. The findings are as follows: Firstly, the GVC participation of both South Korea and China negatively affects their inflation rates. When analyzing the GVC participation separately for forward and backward participation, it was observed that the forward participation of both countries negatively influences inflation. However, the backward participation of South Korea and China positively impacts inflation. Secondly, after the global financial crisis, there were differences in the analysis results for South Korea and China. The influence of GVC participation on inflation was not statistically significant for both countries. However, when analyzing the impact of forward and backward participation separately, China showed mostly insignificant effects on most inflation indicators. In contrast, South Korea's forward and backward participation seemed to have an expanding effect on inflation. This may be attributed to China's attempt to shift external demand to domestic demand and replace imported intermediate goods with domestic products, leading to a reduction in the impact of GVC participation. On the other hand, South Korea continued to show a relatively low decrease in GVC participation after the global financial crisis, indicating that the impact on inflation remains significant.

Experimental Preservation of Isolated Rabbit Lung for Transplantation (이식을 위한 가토 적출 폐의 실험적 보존 방법)

  • 김수현;김송명
    • Journal of Chest Surgery
    • /
    • v.29 no.9
    • /
    • pp.931-939
    • /
    • 1996
  • An experimental comparative study was done to determine the protective effects of three preservation solutions on isolated rabbit heart-lung bloc during acute ischemia and reperfusion of the lung during lung transplantation. Thirty Isolated rabbit heart-lung blocs were divided into 3 groups , group I(n:9) was preserved with Hartmann's solution, group II(n: 10) with modified University of Wisconsin solution, and group III(n: 1 1) with Kosin solution. The isolated heart-lung blocs were washed with Hartmann's so ution. Aftar infusion of each preservation solution into pulmonary artery, the heart-lung bloc was stored at 4'c cold preservation solution for each group for 4 hours and .then the heart-lung blocs were reventilated and reperfused. The changes of weight of heart-lung blocs, airway pressure, percent change of PCO2, level of lactate and adenosine deaminase(ADA) and microscopic structure of the lung parenchyme were evaluated. Results were as follows 1. A change of weight of the heart lung bloc after reperfusion was lowest in group 111(p< .05) 2. The airway pressure increased after reperfusion in group I but decreased in group II, and II. Especially in group II, post-reperfusion airway pressure returned to level lower than that of en-bloc resection. 3. Pulmonary artery pressure during reperfusion after 4 hour preservation was lowest in group III, and pulmonary artery pressure in group II was higher than in group I(P> 0.1). 4. The level of lactate and ADA in the lung tissue were higher in group III than in group I and II(P< .05) 5. The percent change of PCO2 in perfusate was slightly higher in group III than group I and II. 6. Microscopic changes in lung tissue after reperfusion were diffuse pulmonary edema, expansion of inter- stitial tissue, focal aggregation of erythrocytes, and basement membrane abnormalities, but no differences were found among the three groups. In conclusion, the protective effects of modified University of Wisconsin solution and Kosin solution were slightly superior to Hartmann's solution.

  • PDF

Two Dimensional Size Effect on the Compressive Strength of Composite Plates Considering Influence of an Anti-buckling Device (좌굴방지장치 영향을 고려한 복합재 적층판의 압축강도에 대한 이차원 크기 효과)

  • ;;C. Soutis
    • Composites Research
    • /
    • v.15 no.4
    • /
    • pp.23-31
    • /
    • 2002
  • The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

Effective Operation and Management Systems of Faculties in Mokpo National Maritime University for Differentiated Marine Education (해양계 특성화를 위한 효율적인 학부제 운영 체제 개선 -목포해양대학교를 중심으로-)

  • Kim Kwang Soo;Ahn Young-Seob
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2004.05b
    • /
    • pp.127-150
    • /
    • 2004
  • 목포해양대학교 현행 4개 학부의 교육과정은 1997년도에 전면 개편되어 학부 단위로 무난히 실시되고 있지만, 해사계열의 특수성과 해양공학계열의 학부별 전공 구성의 차이점 등으로 인하여 일률적 학부운영방침을 대학 전체에 동일하게 적용하는 것은 다소무리가 있었다. 해양계 특성화라는 대학의 목표를 향하여 각 학부의 교육목표와 전공특성을 살리면서 사회와 관련산업계의 시대적인 요구를 만족시키기 위하여 학부운영을 효율화$\cdot$극대화할 수 있는 체제 정립 방안을 연구하고 있다. 1차 년도의 연구결과에 의하면, 해상운송시스템학부는 효율적인 학부운영체제의 개선 및 운영시스템 개발을 위하여 학부 특성 및 전공 구성에 대한 분석을 통하여 문제점을 발견하고 해결방안을 모색함과 동시에 학생들의 전공 선택권을 최대한 보장할 수 있는 효율적인 학부 운영 체제를 구축하는 방안을 제시한다. 기관시스템공학부는 현행 의무복수전공제도의 문제점 분석과 해결 방안 강구를 위하여 전공들간의 인계성을 강화하며 활성화할 수 있는 방안을 모색하고 해양경찰학 전공의 운영 및 지도 방안을 연구한다. 또한 해기품질관리 관련 규정 등의 분석을 통해 교육 및 훈련에 대한 질적 향상을 꾀하고 해기품질 향상을 위한 교육평가시스템을 개발하고 구축하고자 한다. 해양전자$\cdot$통신공학부는 전공간의 연계성 구축과 효율적 운영방안을 모색하기 위하여 학부제 및 복수전공제와 관련하여 설문조사 문항을 개발$\cdot$분석하고, 해양전자공학 전공 교과목 정비 및 교재 개발을 시도하고 있다. 해양시스템공학부는 전공구성의 특성을 고려한 탐색과목의 설치 및 산업체 실습과 연계한 학점인정과목의 검토를 위하여 현행의 전공소개 프로그램을 분석하고, 졸업생의 취업을 분석하며 산업체의 요구사항을 조사하고 있다.산 알고리즘의 정당성을 보였다. 맞이하고 있음을 볼 수 있다. 국내광업이 21C 급변하는 산업환경에 적응하여 생존하기 위해서는 각종 첨단산업에서 요구하는 소량 다품종의 원료광물을 적기에 공급 할 수 있는 전문화된 기술력을 하루속히 확보해야 하며, 이를 위해 고품위의 원료광물 확보를 위한 탐사 및 개발을 적극 추진하고 가공기술의 선진화를 위해 선진국과의 기술제휴 등 자원산업 글로벌화 정책이 절실히 요구되고 있음을 알 수 있다. 또한 삶의 질을 향상시키려는 현대인의 가치관에 부합하기 위해서는 각종 소비제품의 원료를 제공하는 광업의 본래 목적 이외에도 자연환경 훼손을 최소화하며 개발 할 수밖에 없는 구조적인 어려움에 직면할 수밖에 없다. 이처럼 국내광업이 안고 있는 여러 가지 난제들을 극복하기 위해서는 업계와 정부가 합심하여 국내광업 육성의 중요성을 재인식하고 새로운 마음가짐으로 관련 정책을 수립 일관성 있게 추진해 나가야 할 것으로 보인다.의 연구 결과를 요약하면 다음과 같다. 첫째, 브랜드 이미지와 서비스 품질과의 관계에서 브랜드이미지는 서비스 품질의 선행변수가 될 수 있음을 증명하였으며 4개 요인의 이미지 중 사풍이미지를 제외한 영업 이미지, 제품 이미지, 마케팅 이미지가 서비스 품질에 영향을 미치고 있음을 알 수 있다. 둘째, 지각된 서비스 품질과 가격 수용성과의 관계에서, 서비스 품질은 최소 가격에 신뢰서비스 요인에서 정의 영향을 미치고 있으나 부가서비스, 환경서비스에서는 역의 영향을 미침을 알수 있고, 최대 가격에 있어서는 욕구서비스 요인은 정의 영향을 미치지만 부가서비스의 경우에는 역의 영향을 미치고 있음을 알 수 있다. 셋째, 서비스품질과 재 방문 의도와의 관계에 있어서 서비스품질은 재 방문 의도에 영향을 미침을 알 수 있다. 따라서 브랜드 이미지는 서비스품질의 선행변수가 될 수 있으며, 서비스품

  • PDF

Immobilization of Xylose Isomerase and Trial Production of High Fructose Corn Syrup (Xylose 이성화 효소의 고정화 및 이성화당의 생산)

  • Chun, Moon-Jin;Lim, Bun-Sam
    • Applied Biological Chemistry
    • /
    • v.26 no.4
    • /
    • pp.222-230
    • /
    • 1983
  • This study was designed to develop a process for the immobilization of xylose isomerase(D-xylose ketol isomerase, EC 5.3.1.5) from Streptomyces griseolus previously isolated by the authors and its application on a pilot plant scale for the production of high fructose corn syrup. The biomass which has endo-excreted xylose isomerase was homogenized under a pressure of $500kg/cm^2$ and 90.8% of the enzyme recovery of the native activity was obtained as compared to 54.7% recovery by the lysozyme treatment. Ionic bonding method was adopted for the enzyme immobilization due to its many reported merits. It was found that the porous resins such as Diaion HP 20, Duolite A-7, Amberlite IRA 93 and 94 were effective in immobilizing the enzyme. In addition, it was disclosed that the regeneration form of $BO_4--$ is effective for Amberlite IRA 93 and $HCO_3-$ for Diaion HP 20. Optimal immobilization condition for Amberlite IRA 93 was pH 8.0 and $55^{\circ}C$ yielding 80.6% of immobilization. Activity decay test showed half life of the immobilized enzyme with Amberlite IRA 93 was more than 24 days at $65^{\circ}C$. The carrier was evaluated to be resuable and its result showed the relative immobilization yields were 98.2, 93.3, 90.7 and 87.5%, respectively at second, third, forth and fifth rebinding test of the enzyme on Amberlite IRA 93. Optimal temperature of the immobilized enzyme was slightly lowered and the range widened to $60\sim70^{\circ}C$, while optimal pH moved toward $8.0\sim8.3$ in its isomerization reaction. The trial production result of high fructose corn syrup in pilot scale immobilization showed that one liter of immobilized xylose isomerase (350 IXIU/ml-R) is capable producing about 293l high fructose corn syrup(75% dry substance) in 30 days.

  • PDF

Interannual Variation of the TOMS Total Ozone and Reflectivity over the Globe (전지구에 대한 TOMS 오존전량과 반사율의 경년 변화)

  • Yoo, Jung-Moon;Jeon, Won-Sun
    • Journal of the Korean earth science society
    • /
    • v.21 no.6
    • /
    • pp.703-718
    • /
    • 2000
  • In order to investigate interannual variation of total ozone and reflectivity over the globe, Nimbus-7/TOMS data were used on the monthly mean and its anomaly for the period of 1979-92. This study also examined MSU channel 4(Ch4; lower-stratosphere) brightness temperature data and two model reanalyses of NCEP and GEOS to compare the ozone variation with atmospheric thermal condition. In addition, the MSU channel 1(Ch1 ; lower-troposphere) brightness temperature was used to compare with the reflectivity. The ozone showed strong annual cycle with downward trend(-6.3${\pm}$0.6 DU/decade) over the globe, and more distinct response to volcanic eruption than El Ni${\tilde{n}$o. The relationship between total ozone and MSU Ch4 observation, and between the ozone and model reanalyses of lower stratosphere temperature showed positive correlation(0.2-0.7) during the period of 1980-92. Reflectivity increased interannually by 0.2${\pm}$0.06%/decade over the globe during the above period and reflected El Ni${\tilde{n}$o(1982-83, 1991-92) well. Its variability in annual cycle was remarkably smaller in tropics than in higher latitudes. This is inferred due to cloud suppression and tropical upwelling regions. Reflectivity correlated negatively(-0.9) to the Ch1 temperature over the globe, but positively(0.2) over tropical ocean. The positive value over the ocean results from the effect of microwave emissivity which increases the Ch1 temperature with enhanced hydrometeor activity. Significant correlations between total ozone and the Ch4 temperature, and between reflectivity and the Ch1 Suggest that the TOMS data may use valuably to better understand the feedback mechanism of climate change.

  • PDF

Influence of Glass Dielectric Property on the External Electrode Fluorescent Lamps (유리관의 유전 특성이 외부전극 형광램프에 미치는 영향)

  • Shin, Myeong-Ju;Jeong, Jong-Mun;Kim, Jung-Hyun;Kim, Ga-Eul;Lee, Mi-Ran;Yoo, Dong-Gun;Koo, Je-Huan;Hong, Byoung-Hee;Choi, Eun-Ha;Cho, Guang-Sup
    • Journal of the Korean Vacuum Society
    • /
    • v.16 no.5
    • /
    • pp.330-337
    • /
    • 2007
  • Influence of glass dielectric property (dielectric constant K, dielectric loss) on the external electrode fluorescent lamps of the dielectric barrier discharge has been investigated with 4-different glasses. Conventional borosilicate glass tubes with $K=5.6{\sim}5.9$ and tan ${\delta}=5.0{\times}10^{-3}{\sim}6.0{\times}10^{-3}$ and aluminosilicate glass tubes with high K=6.6 and low tan ${\delta}=1{\times}10^{-4}$ and soda-lime glass tribes with K=7.7 and tan ${\delta}=1.37{\times}10^{-2}$ have been compared. The high value of dielectric constant K makes the capacitance of external electrode fluorescent lamps intensity and enhances the discharge efficiency. The dielectric loss of tan ${\delta}$ shows the factor of power consumption in the external electrode to induce heats and to be weak in pinhole stability. The aluminosilicate glass tubes of high K and low tan ${\delta}$ have been enhanced by $14{\sim}18%$ in luminance and efficiency in comparison with the conventional borosilicate glass tubes and the aluminosilicate external electrode fluorescent lamps are strong against the pinhole formation. Soda-lime glass tubes with high K and high tan ${\delta}$ are a little favorable in luminance and efficiency and they are very weak in pinhole occurrence.

A study on the small melon-shaped celadon ewer found in the Sinan shipwreck (신안선 출수 청자과형소주자(靑磁瓜形小注子)의 용도에 관한 시론)

  • Lee, Myoungok
    • Korean Journal of Heritage: History & Science
    • /
    • v.52 no.4
    • /
    • pp.154-169
    • /
    • 2019
  • This study attempts to shed light on the nature and purpose of the small melon-shaped celadon ewer that was found in the Sinan shipwreck, focusing on the fact that it has the shape of a ewer, yet could not really have served as a tea or liquor utensil given its small size and unusual shape. We analyzed the shape-related characteristics of other melon-shaped celadon ewers as well as this one; checked the use of similar items unearthed in China and Japan; examined the relevant literature, materials, and paintings; and arrived at the following conclusion. First, it was found that the small melon-shaped celadon ewer was one of a type that was first made in the Southern Song Period in China and continued to be made until the Yuan Period. The artifact displays some differences from many similar relics found in the same shipwreck, particularly its spout, lid, and handle. Second, research on the tea ceremonies and types of liquors prevalent during the Song and Yuan Periods of China, as well as the appearance of this ewer, suggest that it was unsuitable for use as a liquor utensil. Third, we looked at the relevant literature records, paintings, and relics unearthed in China and Japan in an attempt to determine its actual purpose. It is well known that the literati had a deep affection for stationery items, particularly water droppers, which were made in a variety of shapes during the Song Period of China and thereafter. According to literature dating from the Song and Ming Periods, it appears that melon- or ewer-shaped water droppers were used. Certain paintings from the Ming Period depict a small ewer, along with a water dropper, as a stationery item. Looking at paintings dating from medieval Japan, small ewer-shaped objects do not figure among the tea and liquor utensils depicted, whereas kettles with handles and hot water bottles do. Objects known as yeonjeok (a water dropper) were included among the items said to have been made in pottery kilns during medieval Japan. However, a book on flower arrangement of Japan dating from the fifteenth century shows a small ewer, with flowers in it, among the stationery items placed on a desk. Based on this detail, it is concluded that the small melon-shaped celadon ewer from the Sinan shipwreck might have been used as a flower bottle as well as a stationery item.