• The Korean Journal of Rheology
• /
• v.10 no.3
• /
• pp.137-142
• /
• 1998

유변물성 자료로부터 고분자의 다분산성을 예측하는 방법은 신속한 중합반응 공정 제어를 위해서 중요한 연구분야중 하나이다. 본 연구에서는 다양한 분자량과 분자량 분포를 가진 폴리에틸렌에 대한 Shroff와 macridis 가 제시한 다분산성 매개변수 ER과 ET를 구하 고 겔투과 크로마토그래피에서 얻은 Mw/Mn과의 상관관계를 조상하였다. Mw/Mn과 비례적 인 상관관계를 보여주었으나 ET는 상관성이 없는 것으로 나타났다. ER값에는 분자량 분포 도 외에 LCB의영향도 큰 것으로 나타났다. 또한 분자량 분포중에서 고분자량 부분의 미미 한 변화에도 ER이 크게 변해 GPC보다 다분산성의 변화를 더 민감하게 예측할수 있음을 알 수있었다.

• The Korean Journal of Rheology
• /
• v.8 no.2
• /
• pp.103-118
• /
• 1996

변형된 Maxwell 모델을 모의 데이터와 폴리스티렌의 동적 실험 데이터인 G＇과 G ＂에 적용하여 연속 완화시간 스펙트럼을 결정하였고, Maxwell 모델을 사용했을 때 얻어지 는 불연속 완화시간 스펙트럼과 비교하였다. MGMM과 GMM 모두 선형회귀 방법과 비선 형회귀 방법을 사용하여 완화시간 스펙트럼을 결정하였는데 비선형 방법을 사용했을 때 선 형방법에 비해 좀 더 만족스러운 결과를 얻을수 있었다. 모의 데이터의 경우 사용한 완화시 간의 수가 많은 경우에는 MGMM과 GMM 모두 원래의 스펙트럼을 잘 재현했으나 완화시 간의 수가 작은 경우에는 MGMM이 GMM에 비해 원래의 완화시간 스펙트럼을 보다 잘 나 타내었다. 또 단분산성폴리스티렌의 경우 MGMM과 GMM의 완화시간 스펙트럼이 모두 작 은 완화시간 영역에서는 분자량에 무관했고 큰 완화시간 영역에서는 분자량이 커질수록 스 펙트럼이 완화시간이 커지는 쪽으로 이동하였다. 또 두드러진 terminal 완화시간을 볼수 있 었다. 그러나 다분산성 폴리스티렌의 경우에는 단분산성의 경우와는 달리 두드러진 terminal 완화시간을 볼수 없었다. 그리고 MGMM의 파라미터 m은 분자량 분포에 크게 의존함을 알 수 있었으며 연속 완화시간 스펙트럼에서 계산된 불연속 완화시간 스펙트럼이 GMM에서 얻어진 불연속 완화시간 스펙트럼과 잘 일치함을 볼수 있었다.

• The Korean Journal of Rheology
• /
• v.1 no.1
• /
• pp.54-62
• /
• 1989

준희박과 농축용액에서 약간의 유연성을 갖는 강성막대형 고분자의 회전확산계수와 zero shear rate 점도를 예측하기 위해 한정된 강성 사슬모델이 제시되었다. 본 연구에서는 이제시된 모델을 분자량 분포를 갖는 다분산계로 확장시켰다. 분자들의 분자량 분포 (MW/Mn) 와 분포 함수를 알수 없기 때문에 해당분자에 가장 적당한 분자량 분포와 함수를 취하였다. 만약 이것들을 알고 있다면 제시된 모델로 회전확산계수와 zero shear rate 점도 등과 같은 인자들을예측할수 있었다. 단분산계의 경우와 같이 다분산계에서도 회전확산계수 의 평균분자 윤곽길이 의존도는 L-7 에 비례하는 것으로 나타났다. Doi와 Edwards 의 튜브 모델에 의한 L-9 과 다른 이유는 분자들의 거동을 관찰하기 위해 임의로 선정된 하나의 막 대형 고분자운동을 제약하는 정도가 심하지 않았으며 따라서 제약 완화시간도 훨씬 짧았기 때문이다. 더구나 점도와 회전 확산계수와 단분산계에서는 정성적으로 일치한데 제약 완화 시간도 훨씬 짧았기 때문이다. 더구나 점도와 회전적인 일치를 나타내었다. 이 모델로 기준 으로 하여 분자들의 길이와 종류에 관계없이 하나의 master curve를 그릴수 있었다.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.277-287
• /
• 1998

In this work continuous thermodynamics was adopted for describing the influence of copolymer polydispersity on phase separations in random copolymer solutions. Continuous themodynamic frameworks were formulated using the Flory-Huggin's excess Gibbs free energy model in which the concentration- and temperature-depentent terms of interaction parameter x were modified. Cloud-point curves and coexistence curves of poly(ethylene-vinylactate)/methylacetate solutions and poly(ehtylene-vinylacetate)/ethylacetate solutions were measured, and experimental data were fitted with theoretical relations formulated in this work. Calculated could-point curves were more good ageeable with experimental data than the modified Flory-Huggins's relations. Coexistence curves which were evaluated by using parameters of x estimated from experimental cloud-point curves, were found to coincide with experimental data.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.41-48
• /
• 2001

Polyurethane(PU) microgels were synthesized from poly(caprolactone) diol(PCD) and/or poly(ethylene glycol)(PEG), diisocyanate and 1,2,6-hexane triol by solution polymerization method. A critical gelation concentration of the PU microgels with, mole ratios of PCD/PEG were the important factors influencing the formation and property microgel or macrogels. The physical and thermal properties of the PU microgels prepared with depending upon the structure of diisocyanate, mole ratio of PCD/PEG, and molecular weight of PEG were investigated. It was found that PU microgels were distributed by polydisperse, spherical small particles below 300nm and showed the properties of low viscosity.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.557-566
• /
• 2021

We investigated the properties of Korean traditional animal glue which are associated with the use of different parts of cattle hide and extraction conditions. Both average molecular weight(Mw, Mz) and polydispersity (PDI) of the animal glue increased with extraction time, whereas only PDI decreased after 48h. There were no differences in the average molecular weight and PDI for the different cattle hide parts used, although a individual difference was observed with regard to total molecular weight. Differences in extracts over time were compared by investigating the amide regions representing the gelatien component of the animal glue. The triple helix structure of the belly skin deteriorated in a manner proportional to the extraction time, and differences were observed for each cattle hide part. The yellowness increased with the extraction time; however, the viscosity was not proportional to the average change in molecular weight. This study has some limitations because of difficulties in the quality control of cases where small amounts of glue were extracted as small differences might impact the overall results considerably. Further research exploring various extraction conditions is required to ensure the prodiction of traditional animal glue with optimum qualities.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.28-34
• /
• 2021

SiO2/Ag core-shell nanoparticles were synthesized by combining modified Stöber process and reverse micelle method using acetoxime as a reducing agent in water/dodecylbenzenesulfonic acid (DDBA)/cyclohexane reverse micells. The SiO2/Ag core-shells were studied for structure, morphology and size using UV-visible spectroscopy, XRD, SEM and TEM. The size of a SiO2/Ag core-shell could be controlled by changing the [water]/[DDBA] molar ratio (WR) values. The size and the polydispersity of SiO2/Ag core-shells increased with increase of the WR value. The resultant Ag nanoparticles exhibit a strong surface plasmon resonance (SPR) peak at 430 nm over the amorphous SiO2 nanoparticles. The SPR peak shifted to the red side with increase in nanoparticle size. Conductive pastes with 70 wt% SiO2/Ag core-shell were prepared, and the pastes were coated on the PET films using a screen-printing method. The printed paste film of the SiO2/Ag core-shell showed higher surface resistance than the commercial Ag paste in the range of 460~750 µΩ/sq.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.36-44
• /
• 2023

Core-shell TiO₂/Ag nanoparticles were synthesized by a modified sol-gel process and the reverse micelle method using acetoxime as a reducing agent in water/dodecylbenzenesulfonic acid (DDBA)/cyclohexane. The structure, shape, and size of the TiO₂/Ag nanoparticles were investigated using X-ray diffraction (XRD), UV-visible spectroscopy, scanning electron microscope (SEM), transmission electron microscope (TEM), and thermogravimetric analysis (TGA). The size of TiO₂/Ag nanoparticles could be controlled by changing the [water]/[DDBA] molar ratio values. The size and the polydispersity of TiO₂/Ag nanoparticles increased when the [water]/[DDBA] molar ratio rose. The resultant Ag nanoparticles over the anatase crystal TiO₂ nanoparticles exhibited a strong surface plasmon resonance (SPR) peak at about 430 nm. The SPR peak shifted to the red side with the increase in nanoparticle size. Conductive pastes with 70 wt% TiO₂/Ag nanoparticles were prepared, and the pastes were coated on the PET films using a screen-printing method. The printed paste films of the TiO₂/Ag nanoparticles demonstrated greater surface resistance than conventional Ag paste in the range of 405~630 μΩ/sq.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.481-489
• /
• 1996

D,L-lactide (2-LA) was copolymerized with ${\beta}$-methyl-${\delta}$-valerolactone (MVL) using tetraphenyltin as a catalyst and the properties of the copolymers were investigated. The composition of the repeating unit of lactic acid in the copolymers was higher than that in the monomer feeds. The composition of the lactic acid unit in the copolymers decreased with increasing copolymerization time. The yield and the molecular weight of the copolymer increased with increasing 2-LA in the feed composition. These results suggest that the reactivity of 2-LA is larger than that of MVL. The number average molecular weight was in the range of 54,000 to 63,000 and the polydispersity index was in the range of 1.7 to 2.1. The copolymers did not show melting point, but glass transition temperature. The degradable tendency of the copolymers with lipase was almost equal to that of L-lactide-MVL copolymer.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.458-465
• /
• 2020

Isotherms, kinetics and thermodynamic properties for adsorption of acid fuchsin (AF) dye by activated carbon were carried out using variables such as dose of adsorbent, pH, initial concentration and contact time and temperature. The effect of pH on adsorption of AF showed a bathtub with high adsorption percentage in acidic (pH 8). Isothermal adsorption data were fitted to the Freundlich, Langmuir, and Dubinin-Radushkevich isotherm models. Freundlich isothem model showed the highest agreement and confirmed that the adsorption mechanism was multilayer adsorption. It was found that adsorption capacity increased with increasing temperature. Freundlich's separation factor showed that this adsorption process was an favorable treatment process. Estimated adsorption energy by Dubinin-Radushkevich isotherm model indicated that the adsorption of AF by activated carbon is a physical adsorption. Adsorption kinetics was found to follow the pseudo-second-order kinetic model. Surface diffusion at adsorption site was evaluated as a rate controlling step by the intraparticle diffusion model. Thermodynamic parameters such as activation energy, Gibbs free energy, enthalpy entropy and isosteric heat of adsorption were investigated. The activation energy and enthalpy change of the adsorption process were 21.19 kJ / mol and 23.05 kJ / mol, respectively. Gibbs free energy was found that the adsorption reaction became more spontaneously with increasing temperature. Positive entropy was indicated that this process was irreversible. The isosteric heat of adsorption was indicated physical adsorption in nature.