• Title/Summary/Keyword: 다공물질

Search Result 417, Processing Time 0.035 seconds

주성분 분석 기법을 이용한 침윤소화약제의 일치성 분석

  • Kim, Seong-Su;Jo, Nam-Uk;Lee, Dong-Ho
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2013.04a
    • /
    • pp.23-24
    • /
    • 2013
  • 침윤소화약제는 소화용수와 혼합시 표면장력을 저하시켜 침투성을 향상시키는 약제로 다공성 적층물질의 화재를 진압하기 위하여 사용된다. 목조건물 및 다공성물질, 적층물질에서 화재가 발생한 경우, 일반소화용수로는 재발화의 가능성이 있는 물질의 심부까지 침투하기 어려워 심부화재로 전이될 가능성이 높다. 따라서 소화용수에 침윤소화약제를 혼합함으로써 침투성능을 향상시켜 연소물질 심부의 화재를 진압하며 이에 대한 기준 연구가 절실히 요구되고 있는 현시점에서 침윤소화약제의 성능을 평가할 수 있는 기법의 필요성 또한 커지고 있다. 이에 본 연구에서는 분석학적 기법을 통하여 침윤소화약제의 성분에 대하여 제품별 공통 성분과 제품별 특성성분 데이터를 지문영역으로 확보하였다. 이러한 일치성 평가를 실시함으로써 인증을 득한 소화약제의 사후 관리 기법으로 활용하고자 기초연구를 실시하였다.

  • PDF

Heat and Mass Transfer in Highly Porous Media (고 다공성 물질에서 열 및 물질전달)

  • 이금배
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.14 no.3
    • /
    • pp.685-693
    • /
    • 1990
  • The heat transfer coefficients were calculated numerically to see the effects of radiation around the porous medium put on the flat plate at a distance from the leading edge of flat plate for the two-dimensional laminar flows. To verify the analytical model developed and invoke the heat/mass transfer analogy, an experiment was carried out using naphthalene sublimation technique. From the effects of the wake, Sherwood number is maximum around the region where the porous medium is attached. The theoretical results correspond well with the experimental results at small Darcy number. Permeability of ceramic blocks used for experiment was also measured and the Forchheimer equation is applicable in our measurement range.

A Study on the filtering bed of porous sintering-product and hydrophytes for sewage treatment (오·폐수처리를 위한 수생식물 다공성 소결체여상의 기초연구)

  • Kim, Ju-Hyung;Yun, Chan;Oh, Joon-Seong
    • Clean Technology
    • /
    • v.7 no.2
    • /
    • pp.89-97
    • /
    • 2001
  • The purpose of this study was to find the optimum condition of the high removal efficiency of water pollutant as sewage treatment technology using a filtering bed charged with porous sintering-pellet which was planted with hydrophytes. Experiment was carried out by changing concentration of water pollutants(COD, T-N, T-P), kind of hydrophyte, kinds of filtering material and size, and HRT. The result of removal efficiency was obtained as following: COD removal 73.8~87.1% for input concentration range of 50~450mg/L, T-N removal 61.3~77.3% for input concentration range of 7~124mg/L, T-P removal 89.5~99.1% for input concentration ranger of 3~27mg/L. In a comparative experiment of three kinds of hydrophyte(Iris pseudoacorus, Phragmites communis $T_{RIN}$., Oenanthe javanica Dc.), the best removal efficiency of COD and T-N was gained with Iris pse-udoacorus, and Phragmites communis $T_{RIN}$ showed better result than two hydrophytes for the removal efficiency of T-P. In a comparative experiment of four kinds of filtering-materials, the removal efficiencies were in the order of porous sintering-pellet, gravel, nonused-tire and nonused-concrete. It was found that for the porous sintering-pellet, the smaller its diameter, the better its result. In the filtering bed in which was charged with porous sintering-pellets of 5mm diameter and planted with Iris pseudoacorus, the removal efficiency of COD, T-N and T-P were over 80%, 70% and 90% under the concentration of COD 250mg/L, T-N 70mg/L and T-P 15mg/L for 24hrs treatment. Thus, we concluded that a filtering bed charged with porous sintering-pellet and planted with hydrophytes will be suitable for treatment of sewage water as a pro-natural treatment technology.

  • PDF

Super-Hydrophobic Coating and Plasma Electrolytic Oxidation for Anti-Corrosion Property of Magnesium Alloy (초발수 코팅 및 플라즈마 전해 산화를 이용한 마그네슘합금의 내식성 향상)

  • Ju, Jae-Hun;Kim, Dong-Hyeon;Kim, Gwon-Hu;Lee, Jeong-Hun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.79-79
    • /
    • 2018
  • 마그네슘은 나트륨, 알루미늄과 함께 지구상에서 가장 풍부한 금속 중 하나로서 밀도가 약 $1.74g/cm^3$으로서 구조용 금속재료 중 가장 가볍고 우수한 비강도를 지니고 있으며, 우수한 열전도도, 전기전도도, 전자파 차폐능을 지닌다. 최근 마그네슘 및 그 합금은 항공기, 자동차, 전자제품, 기계류 및 생활용품 등에 쓰이고 있으며, 사용량 및 적용범위가 매년 급격히 증가되고 있는 추세이다. 그러나 마그네슘합금은 매우 낮은 표준 환원전위와 치밀하지 못한 표면 산화막으로 인하여 부식에 대한 저항성이 매우 취약하다는 한계를 가지고 있다. 따라서 마그네슘합금의 표면처리 가운데 부식에 대한 저항성을 보완할 수 있는 방법은 활발한 마그네슘합금의 응용에 필수적이다. 이러한 마그네슘합금의 내식성을 향상시키고자 전기화학적 플라즈마 전해 산화처리 (Plasma Electrolytic Oxidation)를 하게 되는데, 아노다이징, 화성피막처리 등 과 같은 기존의 산업적 표면처리 방안으로는 불가능한 수준의 표면경도를 확보할 수 있을 뿐만 아니라 두꺼운 산화피막 형성을 통해 이들 합금이 가진 기본적 취약점인 내식성 문제를 보완할 수 있는 장점이 있지만, 다공성 산화피막 형성만으로 기대할 수 있는 내식성 향상 효과가 매우 크지는 못하다. 따라서 다공성의 양극산화피막의 단점, 즉 다공성 물질로 부식성 물질의 이동을 허용할 수 있는 공간을 가지는 구조를 개선시킬 수 있는 추가적인 처리를 필요로 한다. 본 연구에서는 발수성 표면처리를 이용하여 다공성 구조물의 표면이 물에 대한 저항성을 가지도록 함으로써 초발수성 표면을 구현하고자 하였다. 이러한 방법은 기존의 후처리 방법인 봉공처리로는 얻을 수 없었던 다공성 구조물로의 부식성 물질의 침투를 억제할 수 있었으며, 상당한 수준의 내식성 향상 효과를 보여주었다. 또한 물에 대한 반발성은 표면에 물의 이동성을 높이는 효과를 보여주며 이로 인하여 자기세척 효과도 보여주었다.

  • PDF

Electrochemical Characteristics of Porous Silicon/Carbon Composite Anode Using Spherical Nano Silica (구형 나노 실리카를 사용한 다공성 실리콘/탄소 음극소재의 전기화학적 특성)

  • Lee, Ho Yong;Lee, Jong Dae
    • Korean Chemical Engineering Research
    • /
    • v.54 no.4
    • /
    • pp.459-464
    • /
    • 2016
  • In this study, the electrochemical characteristics of porous silicon/carbon composite anode were investigated to improve the cycle stability and rate performance in lithium ion batteries. In this study, the effect of TEOS and $NH_3$ concentration, mixing speed and temperature on particle size of nano silica was investigated using $St{\ddot{o}}ber$ method. Nano porous Si/C composites were prepared by the fabrication processes including the synthesis of nano $SiO_2$, magnesiothermic reduction of nano $SiO_2$ to obtain nano porous Si by HCl etching, and carbonization of phenolic resin. Also the electrochemical performances of nano porous Si/C composites as the anode were performed by constant current charge/discharge test, cyclic voltammetry and impedance tests in the electrolyte of $LiPF_6$ dissolved inorganic solvents (EC:DMC:EMC=1:1:1vol%). It is found that the coin cell using nano porous Si/C composite has the capacity of 2,006 mAh/g and the capacity retention ratio was 55.4% after 40 cycle.

A Flat Loudsspeaker driven by Multi-layer diaphragm (다층 진동판으로 구동되는 평판 스피커)

  • Yi H.R.;Kim B.N.;Oh S.J.
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • spring
    • /
    • pp.131-136
    • /
    • 2004
  • 스피커는 진동판의 크기와 형태 외에도 소재 또는 내부구조에 따라 구동 특성이 달라진다. 본 연구에서는 동일한 신호가 입력되는 두 진동판 사이에 공동을 형성시킨 경우, 다공성 흡음재를 삽입한 경우 스피커의 특성 변화를 관측하였다. 특히, 다공성 흡음재를 삽입한 경우, 다공성 물질의 체적을 동일하게 하고 진동판 표면 상태에 따른 영향과 진동판 상의 진동 전달 경로에 의한 영향을 제거하여 내부물질에 따른 특성의 변화를 측정하였다.

  • PDF

Anodic Oxide Membrane Formation of Hexagonal Pore Arrarys on Aluminium (다공성 알루미나 박막의 나노 스케일 구조 제어)

  • Jung, Kyung-Han;Shin, Hoon-Kyu;Kwon, Young-Soo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.07b
    • /
    • pp.830-833
    • /
    • 2002
  • 최근 나노 구조 (nano structure)를 만들기 위한 시도 중 하나로서 스스로 조직화(self organization)하여 나노 구조를 형성하는 물질을 나노 소자 제작을 위한 형틀 (template)로 이용하려는 시도가 활발히 진행되고 있다. 이러한 물질로서 주목을 받고있는 것 중 하나가 전해질 용액에서 알루미늄을 양극산화(anodization) 시켰을 때 형성되는 다공성 알루미나 박막이다. 본 연구에서는 고 순도 알루미늄을 기계적으로 연마(mechanical polishing)하고 공기 분위기에서 어닐링 (annealing)하여 알루미늄을 재결정화(recrystallization) 시키고 인가 전압이 40 V인 정 전압하에서 0.3 M의 수산(oxalic acid)을 전해질로 사용하면서 양극산화를 수행하여 평균 직경이 65 nm인 고도로 배열된 육방밀집구조의 나노 다공성 박막을 제작하였다. 또한 같은 방향의 육방밀집 배열은 크기가 수 ${\mu}m$인 영역(grain)을 형성하고 있었으며, 평균적인 pore의 밀도는 $1.1{\times}10^{10}/cm^2$였다.

  • PDF

A numerical analysis of effective thermal conductivity of a porous nuclear fuel (다공성 핵연료 소결체의 유효열전도율의 수치적 해석)

  • 주영철;박권현
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.11 no.3
    • /
    • pp.368-375
    • /
    • 1987
  • Effective thermal conductivity of the porous nuclear fuel has been investigated numerically. Difficulties associated with irregular shape of pore have been overcome by using the Body Fitted Coordinate Systems. A computer code has been developed to solve the governing equation with appropriate boundary conditions by transforming from the Cartesian coordinates to the nonorthogonal curvilinear coordinates. The effects of the porosity have been investigated. For a convenient use of the result, a correlation equation was suggested under the assumption of circular pore. The computation results by the assumption of randomly oriented elliptic pore has been agreed more closely to existing experimental result than that by the assumption of circular pore.

A Numerical Study on the Transport of Soluble Contaminants in Porous Grounds (다공성 지하에서 수용성 오염물의 이동에 관한 수치적 연구)

  • 윤도영;김민찬
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 1998.06a
    • /
    • pp.33-37
    • /
    • 1998
  • 본 연구에서는 다공성 지하에서 침출수에 지하 환경의 오염 및 대처 방안의 효과를 수치적으로 예측하였다. 연구대상으고 매립지 지하에서의 침출수의 흐름은 Darcy 법칙을 사용하여 해석하였고, 오염물질의 이동은 이산-분산 모델에 수착의 효과를 고려하여 해석하였다. 침출수의 흐름 및 오염물질의 이동 방정식을 2차원 계를 대상으로 하여 Galerkin유한 요소법을 사용하였다. 수치해석 결과 침출수의 흐름은 매립지 제방 근처에서 강하게 일어나는 것으로 나타났다. 연직 차수막은 오염물질의 이동을 막는데 별 도움을 주지 못하나, 수착은 오염물질의 이동을 지연시키는데 상당한 효과가 있는 것으로 보인다.

  • PDF

Two-way Coupling with Absorption and Sinking (흡수와 침수를 수반하는 유체-물체 상호작용 시뮬레이션 기법)

  • Um, Ki-Won;Baek, Seung-Ho;Han, Jung-Hyun
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2012.06c
    • /
    • pp.377-378
    • /
    • 2012
  • 본 논문은 다공성 물체와 유체 간의 상호작용 기법을 제안한다. 다공성 물체는 구성 물질의 특성에 따라 물에 떠있다가 점차 물을 흡수하고 결국 가라앉는다. 제안하는 시뮬레이션 기법은 Eulerian 프레임워크를 이용하며, 다공성 물체의 물리적 속성을 복셀 안에 정의하여 시간에 따라 변화하는 흡수를 시뮬레이션 한다. 본 논문에서는 확산모델의 편미분 방정식을 이용해 풀어내어 흡수를 간단하게 시뮬레이션 할 수 있는 방법을 제안한다.