• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.85-93
• /
• 1999

The destruction of hazardous chemicals such as chlorinated organic compounds(COCs) and nitroaromatic compounds(NACs) by zero-valent iron powder is one of the latest innovative technologies. In this paper. the rapid dechlorination of chlorinated compounds as well as transformation of nitro functional group to amine functional group in the nitroaromatic compounds using synthesized zero-valent iron powder with nanoscale were studied in anaerobic batch system. Nanoscale iron, characterized by high surface area to mass ratios(31.4$\textrm{m}^2$/g) and high reactivity, could quickly reacts with compounds such as TCE, chloroform, nitrobenzene, nitrotoluene, dinitrobenzene and dinitrotoluene, at concentration of 10mg/L in aqueous solution at room temperature and pressure. In this study, the TCE was dechlorinated to ethane and chloroform to methane and nitro groups in NACs were transformed to amino groups in less than 30min. These results indicated that this chemical method using nanoscale iron powder has the high potential for the remediation of soils and groundwater contaminated with hazardous toxic chemicals including chlorinated organic compounds and nitro aromatic compounds.

• Journal of Hydrogen and New Energy
• /
• v.8 no.3
• /
• pp.131-135
• /
• 1997

Aromatic primary amines were prepared by the catalytic hydrogenation of aromatic nitro compounds in a benzene solution over 50 mg of 10 % palladium on charcoal at a room temperature under 45 psi. This paper describes a study on the catalytic hydrogenation of nitrobenzene-$d_5$, $^{15}N$-labelled nitrobenzene, and 4'-nitrobenzo-15-crown-5, respectively. The infrared absorption spectra exhibited a characteristic N-H stretching vibrations at 3450 and $3350cm^{-1}$. The results suggest that the non-readily available aromatic amines would be commercially produced by catalytic hydrogenation because of its good yield and little by-product formation.

• Journal of the Korean Chemical Society
• /
• v.38 no.5
• /
• pp.397-403
• /
• 1994

An activated catalyst prepared from a mixture of nickel nitrate hexahydrate with zinc in dry ethanol under reflux showed exceptional catalytic activity for the reduction of nitroarenes to the corresponding azoxy compounds exclusively in the presence of hydrazine monohydrate. However, when nickel nitrate hexahydrate was replaced by nickel chloride dihydrate with zinc, only the aminoarenes were formed in high yields. With unactivated catalyst, the reduction reaction from a mixture of nitroarenes, nickel nitrate or chloride, excess zinc and hydrazine monohydrate gave the corresponding azo, azoxy and amino compounds in much lower yields.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.577-581
• /
• 1989

Activated Cu-Zn by the reaction of aqueous cupric sulfate and excess Zn showed the exceptional catalytic activity for the reduction of aromatic nitro compounds to the corresponding amino compounds in the presence of hydrazine monohydrate in ethanol. But, aliphatic nitro compounds were not reduced to the amino compounds.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.871-877
• /
• 1994

Most of the aromatic nitro compounds were reduced to amines in high yield by transfer of hydrogen from 4-vinyl cyclohexene to the substrate via palladium catalyst. The usefulness of the method is not affected by the presence of a variety of other functional groups such as -OH, $-OCH_3$, $-CH_3$, $-CO_2H$, and -Cl, except for halogen which is removed during hydrogenation. The reduction of ortho-substituted nitrobenzene such as o-nitrotoluene, o-nitrophenol, o-nitroanisole was slower than the para isomer. Typically, the nitro compound is refluxed in ethanol with a large exess of 4-vinylcyclohexene in the presence of Pd-C catalyst. Under the above conditions, p-nitrobenzaldehyde, p-nitrobenzyl alcohol, and p-nitrobenzyl acetate were reduced to p-toluidine.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1085-1089
• /
• 1998

The well-established nitric acid-sulfuric acid mixed acid process for the nitration of aromatic compounds has serious problems due to the large amount of waste acids and severe reaction conditions. Nitration of toluene can be conducted using nitrogen dioxide and ozone instead of mixed acid. We found that conc. nitric acid increased the reactivity as catalyst and the amount of nitrogen dioxide controlled the extent of nitration. Dinitration proceeded to more than 92 mole % conversion within 2 hr at $0^{\circ}C$ with 6 eq. of nitrogen dioxide and 2 eq./hr of ozone flow. Toluene completed mononitration within 30 min using 3 eq. of nitrogen dioxide, 3 eq. of nitric acid, and 1.5 eq./hr of ozone flow. As a clean process of aromatic nitration, this method is expected to replace the present process which causes the environmental problems.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.55-58
• /
• 2010

Aliphatic and aromatic nitro compounds were selectively reduced to their corresponding amino derivatives in good yields using formic acid and CeY zeolite under monomode reactor. This system is found to be compatible with several sensitive functionalities. Beside the recycling result showed it had a long catalyst lifetime and could maintain activity even after being used for 20 cycles.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1092-1095
• /
• 1999

The well-known mixed-acid process for the aromatic nitration requires subsequent separation of spent acid, mainly dilute sulfuric acid. A novel nitration process using $HNO_3-NO_2-O_3$ was tested in a small pilot scale with 3 mol of p-nitrotoluene. Nitrogen dioxide(14.3 mol) was added three times in parts into the solution of p-nitrotoluene and $HNO_3$(6 mol) in dichloroethane. The nitration proceeded to more than 97% conversion within 5.5 h using 0.871 mol/h of ozone. As a clean process of aromatic nitration, this method is expected to replace the present process which causes the environmental problems.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.179-183
• /
• 1991

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.436-438
• /
• 1989