• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.180.2-180.2
• /
• 2012

저궤도 인공위성에서 배터리는 태양전지 배열기에서 생성된 전력을 저장하여 탑재체 구동과 식구간 위성의 동작 유지를 위하여 사용된다. 최근 상용 배터리 시장에서도 리튬이온 배터리의 보급이 많이 이루진거와 마찬가지로 인공위성에서도 리튬이온 배터리의 사용이 보편화 되는 추세이다. 리튬이온 배터리가 기존에 인공위성에서 사용되던 니켈카드늄이나 니켈수소 배터리에 비하여 자연 방전량이 적다고는 하지만 이 또한 존재하며, 초기 위성 발사시 태양전지 배열기의 전개를 통한 전력 생산이 이루어질 때까지 위성의 동작을 보장하고 임수종료까지 에너지를 충방전 할 수 있는 상태를 유지하여야 하므로 위성 발사 전까지 배터리의 상태를 최적으로 유지해야 함은 필수적이다. 본 연구에서는 저궤도 인공위성의 발사 전까지 배터리의 상태를 최적화 하기위한 배터리 운용에 관하여 기술하며, 배터리 상태에 대한 실측 데이터를 제시하여 배터리의 정상상태를 검증하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.137-138
• /
• 2011

구리 이온은 -0.40V (vs. SCE)에서 전기화학적 환원이 일어나는 반면, 니켈 이온은 -1.19V (vs. SCE)에서 전착이 발생한다. 따라서, 단일 도금욕조 내에서 Ni-Cu 합금도금층을 제조하기 위해서는 두 금속 이온종 간의 전위차를 줄여주어야 하는데, 이를 위해 본 연구에서는 $Na_3C_6H_5O_7{\cdot}2H_2O$를 착화제로 사용하였다. 다양한 Ni-Cu 합금 도금층의 조성을 얻기 위하여 기본 도금욕 내 황산니켈과 황산구리의 비율을 10:1로 설정하였다. 도금 공정 조건에 따른 합금 도금층 조성 변화를 관찰하기 위하여 도금액 pH와 교반 속도에 따른 도금층 조성 변화를 분석하였으며, 도금액의 UV-VIS과 도금층의 XRD 와 SEM 측정을 통하여 도금욕과 도금층 간의 상관 관계를 유추하였다. 본 도금액에 사용된 $Na_3C_6H_5O_7{\cdot}2H_2O$ 착화제의 효과는 pH3에서 가장 현저하였으며, pH 변화 및 교반 속도 변화를 이용하여 다양한 합금 조성을 얻을 수 있었다.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.183-189
• /
• 2010

It is of importance to separate Ni(II) and Co(II) from Mg(II) in solution which was leached from nickel laterite ore. In order to investigate the possibility of separating Ni(II) and Co(II) from Mg(II), adsorption behavior of the three metals from individual and mixed sulfate solutions was investigated by using Diphonix resin. The concentration of each metal in solution was fixed at 100 ppm and the pH of the sulfuric acid solution was changed from 5 to 7. At ambient temperature, the adsorption behavior of the three metal ions followed Langmuir adsorption isotherm. The loading capacity of Diphonix resin for the three metal ions was obtained from the Langmuir isotherm. Since adsorption behavior of the three metal ions from the mixed solution was similar to each other, it was found to be difficult to separate Ni(II) and Co(II) from Mg(II) by using Diphonix resin.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2022

The smelting reduction of spent lithium-ion batteries results in metallic alloys of cobalt, nickel, and copper. To develop a process to separate the metallic alloys, leaching of the metallic mixtures of these three metals with H₂SO₄ solution containing 3% H₂O₂ dissolved all the cobalt and nickel, together with 9.6% of the copper. Cyanex 301 selectively extracted Cu(II) from the leaching solution, and copper ions were completely stripped with 30% aqua regia. Selective extraction of Co(II) from a Cu(II)-free raffinate was possible using the ionic liquid ALi-SCN. Three-stage cross-current stripping of the loaded ALi-SCN by a 15% NH₃ solution resulted in the complete stripping of Co(II). A process was proposed to separate the three metal ions from the sulfuric acid leaching solutions of metallic mixtures by employing solvent extraction.

• Journal of the Korean Chemical Society
• /
• v.37 no.2
• /
• pp.206-212
• /
• 1993

Syntheses and properties of zwitterionic dithiocarbamates and their nickel(Ⅱ) complexes are described. The complexes have been characterized by mass infrared and electronic absorption spectroscopy, and conductivity measurement. Ni(Ⅱ)-dithiocarbamato complexes are soluble in polar solvents such as water, methanol, and acetone etc. The possible structures were proposed on the basis of elemental analyses and physical properties.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.415-423
• /
• 1996

Hydrogen reduction technique was used to form the nickel layer onto alumina powders in nickel sulfate solutions. The reduction rate and precipitation states of nickel ions were investigated at various experimental conditions such as hydrogen pressure, temperature, $PdCl_{2}$ addition, particle size, and so on. Uniformly nickel coated alumina composite powders were obtained at such condition as reduction temperature of $165^{\circ}C$, hydrogen pressure of 300 psi, and $PdCl_{2}$ amount of $2\;mg/\ell$.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1509-1511
• /
• 2005

군수용 이차전지는 납축전지, 니켈-카드뮴전지 등이 주로 응용되고 있다. 군수용 전지의 경우 민수용에 비해 사용온도범위가 넓고, 진동, 충격 등의 환경시험규격이 까다로우며, 높은 신뢰성이 보장되어야만 한다. 또한 최근 환경문제의 부각으로 니켈-카드뮴전지는 차츰 설자리를 잃어가고 있으며, 납축전지의 경우 오염물질의 배출뿐만 아니라 저온성능이 떨어지는 단점을 가지고 있다. 이의 일환으로 최근 선진외국에서는 이를 대체하기 위한 연료전지, 리튬-이온, 리튬-폴리머, 니켈-수소전지 등의 개발 및 적용이 확대되고 있는 실정이다. 하지만 연료전지의 경우 상용화가 아직 이루어지지 않고 있으며, 리튬계열 배터리의 경우 이상상태에서 폭발하는 특성을 갖고 있어 많은 문제점을 내포하고 있다. 본 논문에서는 군용 니켈-수소전지를 대상으로 특성을 알아보고 배터리의 합리적 운용을 돕기 위한 배터리관리시스템에 대해 살펴보고자 한다.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.48-54
• /
• 2013

The methods to separate and remove copper in the mixed solution ((399 ppm Cu, 208 ppm Fe, 15.3 g/L Ni, 2.1 g/L Co) with nickel, cobalt and iron were investigated. With hydroxide precipitation method, copper and iron ions were completely precipitated and removed from the solution at pH 7 while some nickel and cobalt also were precipitated. 99.75% copper could be precipitated and removed as copper sulfide from the solution with adding $Na_2S$ (1.25 w/v concentration) of 2 times equivalent of Cu at pH 1. Copper was selectively absorbed on TP 207 ion exchange resin at equilibrium pH 2.0 and could be eluted from copper-loaded resin using 5% $H_2SO_4$.

• Resources Recycling
• /
• v.17 no.1
• /
• pp.59-65
• /
• 2008

The adsorption features of nickel ion in wastewater on manganese dioxide from spent batteries were investigated for its usage as an adsorbent. The aquatic behavior of nickel ion was characterized by MINTEQ program and the considered influential variables on the adsorption of nickel ion were its initial concentration, reaction temperature, the amount of adsorbent, and pH. The adsorption ratio of nickel ion decreased with increasing its initial concentration and thermodynamic estimation has been carried out based on the adsorption characteristics of nickel ion depending on temperature. In addition, the adsorption of nickel ion was shown to be promoted according to the amount of manganese dioxide and a lot of nickel ions were adsorbed as the solution pH was raised.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.58-64
• /
• 2012

A study on the solvent extraction for the separation and recovery of Ni and Li from the leaching solution of active cathode materials of Li-ion batteries was investigated using PC88A(2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester). The experimental parameters, such as the pH of the solution, concentration of extractant and phase ratio were observed. Experimental results showed that the extraction percent of Ni and Li and separation factor of Ni/Li were increased with increasing the equilibrium pH. More than 99.4% of Ni and 28.7% of Li were extracted in eq. pH 8.5 by 25% PC88A and the separation factor of Ni/Li was 411.6. From the analysis of McCabe-Thiele diagram, 99% of Ni was extracted by three extraction stages at phase ratio(A/O) of 1.5. Stripping of Ni and Li from the loaded organic phases can be accomplished by sulfuric acid as a stripping reagent and 50-60g/L of $H_2SO_4$ was effective for the stripping of Ni.