• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.107-114
• /
• 1996

The performance for the algorithm of the arc length method has been examined in terms of the choice of the tangential stiffness matrix through the analysis for the snap buckling phenomenon of the arch beam. The curved beam element with 2 nodes including shear effect has been formed by strain element technique and then it has been used in this nonlinear analysis. Snap-through characteristics has been examined with respect to the ratios of the arch beam length to hight.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.1-10
• /
• 1990

RILEM proposed three point bend test to determine the fracture energy of concrete, but there is discrepancy between the theoritical and the experimental fracture energy of concrete by the influence of self-weight of concrete. This paper presents four point bend test using proving ring in order to take into account the influence of self-weight of concrete. The initial notch to beam depth ratio was varied from 0.2 to 0.6 in order to investigate the variation of fracture energy of concrete according to the variation of initial notch depth. The proposed four point bend test using proving ring was verified to be superior to three point bend test.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.132-136
• /
• 2011

수제는 유수에 의한 하안 침식을 방지하기 위한 목적의 수공구조물이다. 최근에는 하천복원 및 생태계복원에 대한 관심이 증가되면서, 하안 침식 방지뿐만 아니라 수제에 의한 흐름분리 및 재순환영역의 생태 서식처 제공에 대한 역할이 부각되고 있다. 따라서 수제 설계 시, 수제 설치에 따른 수리특성 변화를 미리 파악하는 것이 필요하지만, 수제 간격, 설치 방향, 수제 높이, 수제 길이, 하도 특성 및 접근 유수 특성 등 다양한 인자에 의해 수리특성 변화를 예측하기란 쉽지 않으며, 비용과 시 공간 측면에서 물리 모형을 이용한 접근법도 용이하지 못하다. 따라서 본 연구에서는 2차원 수치모형을 이용하여 수제 설치에 따른 흐름특성 변화를 모의하고, 모형의 적용성을 판별하고자 하였다. 지배 방정식은 기본적으로 천수방정식을 적용하게 되는데, 수제 주변 흐름 특성은 난류에 의한 횡방향 확산이 중요한 인자로작용하게 된다. 상수 와점성(constant eddy viscosity) 모형, 포물선형 와점성 (parabolic eddy viscosity) 모형을통해 개발 모형의예측 결과와 실험수로 결과를 비교하였다. 수제하류의 재순환영역의 길이가 실험수로의 결과에 비해서 5~6 배까지 확대된 결과를 나타내고 있어, 만족할 만한 결과를 현재까지 얻지 못하였다. 횡방향 확산이 중요한 만큼 k-$\varepsilon$ 모형 등 다양한 난류 모형의 적용이 고려되어질 필요가 있으며, 또한 1차원 요소가 아닌 2차원 요소의 적용을 고려할 필요도 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1269-1281
• /
• 1989

본 연구에서는 H를 고정하고 L을 변화시켜가며 내부의 유동구조가 어떻게 변하는가를 살펴보고, 특히 재부착이 일어나는 경우에는 급확대 부분만 존재하는 기존 실험결과와 비교분석하여 하류의 급축소부분이 전체 유동구조에 어떤 영향을 미치는가를 살펴보고자 한다. 실험에서 사용된 작동유체는 공기이며, 입구관 직경은 110mm, 급확대점과 급축소점사이의 연결부 직경은 220mm, 연결부의 길이는 L=300, 600 그리고 900mm의 3가지를 선택하였으며 기준속도는 입구관의 중심속도로 9.71 m/s이다. 입구직경(110mm)을 기준으로 한 Reynolds 수는 $R_{e}$=73,000 이고 입구관반경과 연결부반경의 차이인 계단높이(H=55mm)를 기준으로 하면 $R_{e=36}$ ,500이다. 연결부 의 급확대부분에서 입구관반경을 기준으로 한 반경확대비는 2이고 급축소부분의 반경 축소비는 1/2이다. 측정항목은 유동방향의 벽면압력분포, 유동방향의 평균속도분포 및 난류강도 등이며, L=900mm인 경우는 반경방향과 원주방향의 난류강도, Reynolds 전단응력도 측정되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.200-202
• /
• 2008

동해 울릉분지에서는 시추선 RemEtive를 사용하여 UBGH-X-01 가스하이드레이트 탐사가 2007년에 실시되었다. 본 연구에서는 천부 가스하이드레이트가 확인된 UBGH1-10 정점에서 무인잠수정(Quantam WROV)을 사용하여 획득된 푸쉬코어와 해저지형 분석을 수행되었다.UBGH1-10 정점은 seismic chimneys의 탄성파 특성이 발달된 지역이다. 이곳에서는 해저표면으로부터 수 m 하부에서 가스하이드레이트가 발견되었다. 이 정점은 수 m 높이의 얕은 둔덕들이 무인잠수정에 부착된 비디오 카메라에 의해서 관찰되었다.이곳에서 채취된 길이 약40 cm의 푸쉬코어는 생물교란된 뻘질 퇴적물로 구성되어 있으며, 가스하이드레이트와 chemosynthetic community는 관찰되지 않았다. 푸쉬코어는 X-ray fluorescence scanner를 사용하여 퇴적물의 26가지 원소 조성을 분석하였다. UBGH1-10 정점의 산화환원환경은 Mo/Al과 Mn/Ti 원소비를 이용하여 천부 가스하이드레이트가 발견되지 않은 UBGH1-9와 UBGH1-1 정점과 대비하였다. 이 정점의 일차생산력은 Ba/Al 원소비를 이용하여 다른 정점과 대비하였다. 천부 가스하이드레이트가 발견된 UBGH1-10 정점은 활발한 가스방출과 관련된 생물집단 서식 또는 자생광물 형성의 흔적이 발견되지 않으며, 퇴적물에서도 산화환원환경과 일차생산력의 큰 차이가 관찰되지 않는다.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.439-446
• /
• 2000

In this study, 7 dof (Including warping) beam element was developed to estimate the effects of wagner effects and load height effects on the lateral buckling strength of mono-symmetric I beam. Finite element buckling analysis of mono-symmetric I-shaped girders subjected to transverse loading applied at different heights on the cross-section were conducted. Linear moment gradient were considered, too. In these cases, girders are subjected to both single-curvature and Reverse-curvature bending. An applicability of current LRFD C$\sub$b/ on the mono-symmetric I beam was studied from the finite element results. The problems of current LRFD C$\sub$b/ occurring from load height effects and reverse curvature bending in unbraced length when applied on the mono-symmetric I beam were studied. Solutions to these problems are also presented.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.5-14
• /
• 2018

Recently, method of reinforced earth retaining wall have been proposed according to the material of facing, geosynthetic, construction method, and facing slope. However, the regulations such as the design method and detailed review items according to each construction method are not clear, and collapse due to heavy rainfall frequently occurs. In this study, to obtain a more stable technical approach in the design of reinforced earth retaining wall, the combination of the pullout failure of reinforced earth retaining wall and the optimal reinforcement ratio of height using reinforced earth retaining wall using a single strength reinforcement is assumed, optimum design of stiffener, optimal design of superimposed wall and optimum length ratio of reinforcement material of geosynthetics are proposed through safety factor according to reinforcement length ratio (L/H).

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.153-166
• /
• 1998

This paper shows the results of a series of model tests on the behavior of steel pipe pile which is subjected to lateral and inclined loads in homogeneous and non-homogeneous Nak-dong River sands. Non-homogeneous soil consisted of two layers, upper and lower layer. The purpose of the present paper is to investigate the effect of ratio of lower layer height to embedded pile length, ratio of soil modules of upper layer to lower layer and inclined load on the behavior of single pile. These effects can be quantified only by the results of model tests. As a result. in non-homogeneous sand soil, it is shown that the lateral behavior depends upon the ratio of soil modules of upper layer to lower layer more than other factors. And it was found that the relationship between the deflection ratio of non-homogeneous sand to homogeneous sand and the ratio of lower layer height to embedded pile length can be fitted to exponential function of H/L by model tests results. For the inclined load applied, it is shown that the bending moment-depth relationship is not similar to the case of laterally loaded pile and the depth of maximum bending moment at relative density of 90% increases about 70% more than the pile only loaded laterally.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.103-113
• /
• 2020

The purpose of this study was to development a uniform shirt for high school boys aged 16-18 in the 7th Human Dimension Survey data of Size Korea. The upper body was analyzed to classify the upper body shape and to understand the characteristics of the body by type. Through this, we wanted to obtain the basic data necessary for the development of school uniform shirts. For data analysis, SPSS Ver. 26.0 program was used. In high school boys, there was no significant difference in height by age, but in width, thickness, length, circumference, shoulder slope, and weight, there were significant differences by age. The upper body types were categorized into four types: long shoulder skinny type, long upper body obese type, short shoulder normal type, and long shoulder normal type. Based on the size and body type data extracted from this study, it is thought that the development of uniform shirts with excellent fit should be realized through practical fashion development and construction of a size system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.114-120
• /
• 2011

The characteristics of a helical turbine to be used for tidal stream energy conversion have been numerically studied with varying a few design parameters. The helical turbines were proposed aiming at mitgating the well known poor cut-in characteristics and the structural vibration caused by the fluctuating torque, and the basic concept is introducing some twisting angle of the vertical blade along the rotation axis of the turbine. Among many potential controling parameters, we focused, in this paper, on the twisting angle and the height to diameter ratio of the turbine, and, based on the numerical experiment, We tried to propose a configuration of such turbine for which better performance can be expected. The three-dimensional unsteady RANS equations were solved by using the commercial CFD software, FLUENT with k-${\omega}$ SST turbulence model, and the grid was generated by GAMBIT. It is shown that there are a range of the twisting angle producing better efficiency with less vibration and the minimum height to diameter ratio above which the efficiency does not improve considerably.