• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.81-83
• /
• 1994

막분리공정을 이용한 폐수처리는 오염을 제어할 뿐만 아니라 유용한 성분의 회수라는 측면에서 실용화되고 있다. 일반적인 십자흐름식 여과방식에서 fouling을 최소화하여 투과율을 높히기 위해 선속도(linear velocity)가 필요하며, 에너지 소비가 커진다. 그러나, 막을 회전시켜 shear Sterss를 발생시키고 강한 난류형성으로 농도분극 현상을 최소화시켜 높은 투과율을 얻을 수 있는 회전원판형모듈(rotary disk membrane module)을 기름 emulsion용액의 분리효율에 대하여 조사하고, 폐수처리 및 재활용 적용가능성을 고찰하였다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.297-308
• /
• 2007

The granulation equipment of concentrated wastes is manufactured for the polymer solidification of concentrated wastes. It uses liquid sodium silicate as a granulating agent for the granulating of dried powder containing boric acid. The granulating agent is sprayed in the form of droplet and mean size of dried granules is $2{\sim}4mm$. The new technology which has been used for the polymer solidification of spent resin in U.S. and certified by Nuclear Regulatory Commission (NRC) is successfully applied to concentrated wastes. This uses in-situ solidification process within drum without mechanical mixing. Maximum loading of waste can be achieved without increasing of waste volume. Polymer waste forms were evaluated with several test such as fire test, compressive strength test, leaching test, immersion test, irradiation test, and thermal cycling test according to standard test procedures.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.2
• /
• pp.79-85
• /
• 2012

In this study, Application of sequencing batch reactor (SBR) process for RO retentate treatment was performed. Efficiency of treatment by load and temperature variation was tested. The SBR process was operated two types as HRT per one cycle was 8 and 12 hours, respectively. Methanol was injected for an effective denitrificaion owing to low C/N ratio of the RO retentate. TN removal efficiency of the SBR process was relatively stable at the change of flow-rate and temperature. The optimum time cycle of SBR process was 2 cycle/day for TN removal, and in the case of 3 cycle/day, the effluent TN concentration was found under the effluent quality standard. In the result of assessment, the application of SBR process for RO retentate treatment was effective and could be utilized to design for the wastewater treatment plant. The specific nitrification rate (SNR) and specific denitrification rate (SDNR) were $0.043{\sim}0.066kg\;NH_3-N/kg\;MLVSS{\cdot}day$ and $0.096{\sim}0.287kg\;NH_3^--N/kg\;MLVSS{\cdot}day$, respectively. The derived kinetic could be applied for design to the aerobic and anoxic tank in the RO retentate treatment.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.496-501
• /
• 2016

This study was conducted to minimize the quality degradation of concentrated blueberry juice after $90^{\circ}C$ treatment for 5 min by means of citric acid (CA) and acidic sodium metaphosphate (ASM) as pH modifiers. The highest anthocyanin content was observed at 1% CA+1% ASM (65.747 mg per 100 g) followed by 1% CA (46.022 mg per 100 g) and control (30.864 mg per 100 g). The DPPH radical scavenging activities of 1% CA+1% ASM, 1% CA and control were 87.338, 75.486 and 67.983% in respectively. The elastase inhibitory activity at 1% CA+1% ASM, 1% CA and in the control was 87.338, 75.486 and 67.983%, and the tyrosinase inhibitory of these samples were 77.891, 67.598 and 26.375%, respectively. Anthocyanin contents, DPPH radical scavenging, elastase inhibitory and tyrosinase inhibitory activities were significantly different (p<0.05) between the 1% CA+1% ASM treatment and control. During the heat treatment, quality degradation of concentrated blueberry juice was reduced by the 1% CA+1% ASM treatment, as expected for new acidulants.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.539-546
• /
• 2019

Global warming has mentioned as one of the international problems and these researches have conducted. Carbon Capture, Utilization and Storage (CCUS) technology has improved due to increasing importance of reducing emission of carbon dioxide. Among of various CCUS technologies, mineral carbonation can converted $CO_2$ into high-cost materials with low energy. Existing researches has been used ions extracted solid wastes for mineral carbonation but the procedure is complicated. However, the procedure using seawater is simple because it contained high concentration of metal cation. This research is a basic study using seawater-based wastewater for mineral carbonation. 3 M Monoethanolamine (MEA) was used as $CO_2$ absorbent. Making various concentrations of seawater solution, simulated seawater powder was used. Precipitated metal carbonate salts were produced by mixing seawater solutions and $rich-CO_2$ absorbent solution. They were analyzed by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Thermogravimetric Analysis (TGA) and studied characteristic of producing precipitated metal carbonate and possibility of reusing absorbent.

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.414-420
• /
• 2015

Nitrogen is one of main causes to induce eutrophication of water system and one of contaminants that must be treated for protection of water system. In this study, it was intended to identify a method to increase operation efficiency of municipal wastewater treatment plant (MWTP) by treating high concentration nitrogen. A laboratory scale reactor was operated by using sludge thickener supernatant in the MWTP. During operation of the laboratory scale reactor, it was intended to induce stable nitritation and analyze effects of related operation factors. As results, it was shown that the nitiritation could be induced artificially through control of retention time and sections where the stable nitiritation was induced were identified also. In particular, highly efficient nitrite conversion efficiency near 90% was identified in condition of 1 day retention time. Especially, it was shown that ammonium nitrogen load affected ammonium nitrogen removal efficiency and nitrite conversion efficiency. In the condition of high ammonium nitrogen load, the nitrite conversion efficiency and the ammonium nitrogen removal efficiency decreased. On the contrary in the condition of low ammonium nitrogen load, it was found that the nitrite conversion efficiency decreased. It means that control of ammonium nitrogen concentration and its retention time is needed for the nitritation. It is considered that for the sewage containing high load nitrogen in sludge treatment process as like the sludge thickener supernatant, the nitritation can be applied, which can be suggested as a modification method of MWTP.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.1
• /
• pp.30-34
• /
• 1983

The present study was carried out to determine the effect of a radionuclide, cesium-137, in soybean, which is an element released usually from nuclear facilities. Soybean plants were grown on the pots treated with cesium-137 $0.5{\sim}60{\mu}Ci/1kg$ soil and the uptake, translocation and accumulation of the radiocesium in the plant parts were measured at different growth stage. The results are summarized as follows: 1) Visual toxic symptoms on the plants due to treatment of radioactive cesium were not observed up to $60{\mu}Ci/10Kg$ soil in a pot. 2) The uptake of cesium-137 in soybean plant was increased with increment of concentration applied, while the uptake of potassium was proportionally decreased, indicating to have an ion antagonistic relationship between them. 3) The absolute amounts of cesium-137 in the plants were gradually increased by the pod setting stage, but rather reduced at harvesting stage. The accumulation occurred more in the leaves and stems than the soybean seeds. 4) The rate of uptake was ranged from 0.069 to 0.005 with proportional decrease by increasing concentration applied and the rate of Cs-137 translocation from plants to seeds was averaged 38.6% in soybean plant. The concentration coefficient was 0.04 in the soybean seeds from the pots treated with $20{\mu}Ci$ of cesium-137 and decreased with increment of cesium-137 applied.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.138-147
• /
• 2010

Nematicidal activity against pine wood nematode, Bursaphelenchus xylophilus, was tested in the pot and field by the treatment of microbial formulation after media optimization. The optimized media composition was glycerol 10 g, soybean meal 10 g, NaCl 1 g, $CaCO_3$ 2 g, $K_2HPO_4$ 0.125 g per liter and microbial complex formulation was made with liquid and powder type. Most effective antibiotics against symbiotic microorganism with nematode, kanamycin, was added to the formulation. The control effects against pine wood nematodes were checked by pot test and field test. In the result of treatment by trunk injection, five times treatment was more effective than one time and the treatment with the formulation of concentrated culture supernatant was the most effective in the nematicidal activity showing below 10% mortality in pine tree.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.523-529
• /
• 2019

In this study, we investigated the pretreatment technologies of volatile organic compounds (VOCs) which is a problem as the semiconductor and display industry develops recently. The conventional concentrator used in the direct combustion system, is easily contaminated by the exhaust gas in the manufacturing process of the display, resulting in the low treatment efficiency of generated VOCs. Physical/Chemical analyses of the exhaust gas showed high boiling point and viscosity in addition to a large amount of molecular weight alcohols and oil components. In this study, we tried to treat degrading materials by using the heat exchanger in a pretreatment facility and some materials degrading the concentrator were condensed more than 90%. In addition, it was also confirmed that an auxiliary device of the grease filter could remove the redispersion polymer oil from the heat exchanger.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.140-142
• /
• 1998

돈사에서 발생하는 폐수는 주로 돈뇨와 음용수의 누수 및 세척수 등으로 구성되어 있는데, 생물학적인 축산폐수처리법과 퇴비화법 등으로 처리를 하고 있다. 그러나 일반적인 돈사폐수에는 분의 함량이 많아 부유물질의 양이 많고 유기물 등 오염성분의 농도가 높은 특성을 가지고 있어서 기존의 생물학적 축산폐수 처리법으로는 과부하 운전으로 인한 어려움이 있고, 퇴비화법으로는 수분조절제의 소요량이 많은 문제점을 가지고 있다. 대부분의 현지 양돈농가에서는 돈뇨 등 폐수처리의 어려움으로 인하여 분뇨 분리 시설이 있어도 분뇨를 혼합한 슬러리 형태로 퇴비화하고 있다. 따라서 퇴비화 공정에서 수분조절제로 쓰이는 톱밥의 소요량이 돈분만 퇴비화할 때보다 훨씬 많고 기존의 퇴비화 시설도 과부화 상태로 운전하고 있는 실정이다.