• 베이커리
• /
• no.2 s.355
• /
• pp.70-72
• /
• 1998

• Food Industry
• /
• s.101
• /
• pp.25-35
• /
• 1989

• 베이커리
• /
• no.2 s.379
• /
• pp.145-148
• /
• 2000

• Water for future
• /
• v.51 no.6
• /
• pp.31-35
• /
• 2018

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.800-807
• /
• 1989

No-time dough process utilizing ascorbic acid as an oxidant was investigated. The farinograph absorption was increased as the amount of L-cysteine increased, while stability and peak time decreased up to 40 and 30 ppm of L-cysteine, respectively. Extensibility of the dough was increased with the increment of L-cysteine, but the ratio of resistance to extensibility was significantly decreased. At the same level of L-cysteine, the addition of ascrobic acid by 1.5 times decreased the farinograph absorption. However, the stability and peak time remained relatively unchanged upon addition of ascrobic acid. Extensibility and resistance of dough were respectively decreased and increased in the presence of both L-cysteine and ascorbic acid. In the range of 30-50 ppm of cysteine, the mixing time decreased and the baking absorption was increased by 1% as the cysteine was increased by 10 ppm. The ascorbic acid had no effects on absorption and mixing time. Bread produced by no·time dough process had no break and shred. The optimum concentrations of L-cysteine and ascorbic acid for no-time dough process were 40 and 100ppm, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.111-116
• /
• 2009

LEACH is a important hierarchical protocol in wireless sensor network. In LEACH, the head is randomly selected for balanced energy consume. In LEACH-C, the node that has more energy than the average value is selected for the network life cycle. However, the round continues, the improved protocol is needed because the energy and network are changed. In this paper, LEACH, LEACH-C is not considered the energy consumed in the round because of wasted energy and reduce the time for presenting a new round time was set. And proposed the new algorithm using the energy threshold for the cluster head selection and the round time. In simulation, we show the improved performance compared to existing protocols.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.133-137
• /
• 2018

Arduino is a small microcomputer that is used in a variety of industry fields and especially is widely used as an open source hardware IoT device. The multi-tasking method of Arduino is divided into super loop timing and RTOS thread method. The super loop timing method is simple and easy to understand. However, when one task is long, it affects the execution of the next task. In addition, RTOS threading has the advantage of being able to run without being influenced by other work time. However, Arduino, a small microcomputer, has a disadvantage in that, when the number of threads increases, the context switching time of the thread causes additional time not included in the super loop timing method have. In this paper, we use Arduino Uno R3 and FreeRTOS to analyze these different features, and the task for the experiment is to send 8000 digital signals to the built-in LED port. If two tasks of the same size are executed, the super loop method executes 3 ms faster than FreeRTOS multitasking. If multiple tasks are executed simultaneously, superloop type task is sequential execution and difference in execution time between first task and last task is large. FreeRTOS method can be executed concurrently, but execution time delay of about 30 ms occurs in context switching time.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.479-480
• /
• 2023

현대 사회는 출생아가 줄어들고 고령화 현상이 빠르게 진행 중이다. 20~30대의 사회 복지 종사자가 줄어들고 노인 인구는 늘어나는 반비례 현상이 나타나고 있다. 보호자가 없는 노인에게 낙상 사고와 같은 위급상황이 발생한다면 골든타임을 놓칠 수도 있을 것이다. 따라서, 본 논문에서는 낙상 사고 발생 시, 빠른 시간 내에 실시간 모니터링을 통해 노인 복지사가 상황을 인지할 수 있게 하는 시스템을 개발하였다. 미디어파이프 포즈 모델을 이용하여 관찰 대상의 움직임을 포착하도록 하였고 PTZ 카메라의 서보 모터 제어를 통해 포착한 관찰 대상을 추적하도록 하였다. 주요 장면은 사진으로 저장해 웹 서버로 전송하고, 심박수 측정 센서와 와이파이 통신 모듈이 장착된 아두이노 보드가 실시간으로 웹 서버로 전송하여, 전담 관리자는 사진을 통해 상황을 인식하고 심박수를 보고 얼마나 위급한지 알 수 있도록 하였다.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.3
• /
• pp.105-113
• /
• 2017

This paper presents a novel on-line trajectory optimization framework based on automatic time warping, which performs the time warping of a reference motion while optimizing character motion control. Unlike existing physics-based character animation methods where sampling times for a reference motion are uniform or fixed during optimization in general, our method considers the change of sampling times on top of the dynamics of character motion in the same optimization, which allows the character to effectively respond to external pushes with optimal time warping. In order to do so, we formulate an optimal control problem which takes into account both the full-body dynamics and the change of sampling time for a reference motion, and present a model predictive control framework that produces an optimal control policy for character motion and sampling time by repeatedly solving the problem for a fixed-span time window while shifting it along the time axis. Our experimental results show the robustness of our framework to external perturbations and the effectiveness on rhythmic motion synthesis in accordance with a given piece of background music.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.564-571
• /
• 2003

현대 산업사회는 첨단 산업기술의 발전으로 많은 생산시설이 자동화되고, 작업형태 또한 생산성을 높이기 위한 택트타임(tact time) 분석으로 작업이 더욱 세분화되고 있으며, 이로 인해 작업자의 특정 신체부위만 집중적으로 사용하는 단순 반복작업이 크게 증가하고 있다. 그 결과 작업자가 어깨, 허리, 손목 등에 통증을 호소하는 근골격계질환이 계속 증가하는 추세에 있다. 노동부 자료[1]에 의하면 근골격계질환자 수가 2000년 1,009명, 2001년 1,598명이고 2002년 상반기만 1,069명으로 점차 증가 추세를 보이고 있으며, 2002년 한해 동안만 ○○중공업 253명, ○○조선 158명, ○○자동차 78명의 근골격계질환자가 발생하여 산업재해 판정을 받음으로써, 이로 인한 노동력 상실 및 막대한 비용 손실로 인해 심각한 사회적인 문제로 대두되고 있다[2].(중략)