• Title/Summary/Keyword: 노출율

Search Result 969, Processing Time 0.025 seconds

Changes in Light Transmittance of Greenhouse Covering Materials and Cucumber Growth as Affected by Particulate Matter (미세먼지 발생에 의한 온실 피복재의 광투과율 감소 및 오이 생육 변화)

  • Inseo Hong;Yoomin Ha;Yurina Kwack
    • Journal of Bio-Environment Control
    • /
    • v.32 no.4
    • /
    • pp.312-318
    • /
    • 2023
  • In recent years, fine and yellow dust pollution has become serious in Korea and has negatively affected crop production. Particulate matter (PM) adheres to greenhouse coverings, and it reduces the amount of solar radiation transmitted into a greenhouse. A reduction in light transmittance can have a direct effect on crop photosynthesis and an indirect effect on air temperature in a greenhouse, which can lead to differences in crop yield. The objectives of this study were to investigate the changes in light transmittance of different cover materials by PM and to determine the changes in cucumber growth in a greenhouse due to reduced light transmittance. We measured the changes in light transmittance of polyethylene (PE) and polyolefin (PO) films in the PM generation chambers. Also, cucumber plants were cultivated in a greenhouse with four different light reduction treatments (0, 10, 20, and 30% reduction of light transmittance). The initial light transmittance of PO film was higher than that of PE film and the decrease in light transmittance of PO film due to PM was less than that of PE film. The vegetative growth of cucumber was promoted under the reduced light transmittance treatments; however, the yield of cucumber was highest in the control (0% reduction of light transmittance). From the results, we confirmed that PO film was less PM adhesion and that cucumber yield during the spring season can be reduced by the reduction in light transmittance due to PM.

Production of Stress Shock Proteins DnaK and GroEL in Burkholderia cepacia YK-2 by Phenoxyherbicide 2,4-Dichlorophenoxyacetic Acid as an Environmental Contaminant (Burkholderia cepacia YK-2에서 페녹시계 제초제 2,4-Dichlorophenoxyacetic Acid에 의한 스트레스 충격 단백질 DnaK와 GroEL의 생성)

  • Cho, Yun-Seok;Park, Sang-Ho;Kim, Chy-Kyung;Oh, Kye-Heon
    • Korean Journal of Microbiology
    • /
    • v.35 no.4
    • /
    • pp.270-276
    • /
    • 1999
  • Production of stress shock proteins in Burkholderia cepacia YK-2 in response to the phenoxyherbicide 2,4-dichlorophenoxyacetic acid(2,4-D) as an environmental contaminant was investrigated. The stress schock proteins were synthesized at different 2,4-D concentrations in exponentially growing cultures of B. capacia YK-2. This response involved the production of 43kDa and 41kDa GroEL proteins. The proteins were characterized by SDS-PAGE and Western blot using the anti-DnaK nad anti-GroEL monoclonal antibodies. Total stress shock proteins were analyzed by 2-D PAGE. Survival of B. cepacia YK-2 with time in the presence of different concentrations of 2,4-D was monitored, and viable counts paralleled the production of the stress shock proteins in this bacterium.

  • PDF

Evaluation on De-Icing Salts Laden Environment of Road in Seoul (제설제에 노출된 서울시내 도로 시설물의 열화 환경 분석)

  • Yoon, In-Seok
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.26 no.1
    • /
    • pp.1-9
    • /
    • 2022
  • De -icing salts have been used commonly in areas where snow or ice is a seasonal safety hazard for roadway, however, the salts is one of main causes on serious deterioration of road infrastructures in crowded urban city like Seoul. In order to establish maintenance strategy of road infrastructures under de-icing salts laden environment, it is necessary to examine environmental characteristics and its response to the existing facilities. The purpose of this study is to evaluate the deterioration environment of road infrastructures. Additional purpose is to develop a design model and details for durability design of infrastructures under de-icing salts laden environment, considering mainly a build-up rate of surface chlorides. Concentration of external chloride solution and surface chloride content were calculated at the level of average de-icing salts for 5 years, ratio of auxiliary road of 17.5 to 30%, and effective exposure area to snow 50 to 80%. The chloride build-up rate was 0.073 ~ 0.077% / year and the maximum surface chloride content was calculated to be 2.2 ~ 2.31% by concrete wt. This study is expected to be used for establishing integrated strategy of road infrastructures, such as predicting chloride profiles or degree of chemical corrosion to exposure concrete.

Recovery Rate and Histological Changes in the Gills of Juvenile Abalone Haliotis discus hannai by Exposure Time of Different Water Temperatures and Salinities (수온 및 염분별 노출시간에 따른 북방전복, Haliotis discus hannai 치패의 회복률 및 아가미의 조직학적 변화)

  • Park, Mi Seon;Kim, Seong-Hee;Lim, Han Kyu;Min, Byung Hwa;Chang, Young Jin;Jeong, Min Hwan
    • The Korean Journal of Malacology
    • /
    • v.29 no.3
    • /
    • pp.225-232
    • /
    • 2013
  • This study looked into recovery rate and histological changes in the gills of juvenile abalone Haliotis discus hannai by exposure time (3, 6, 12, 24 and 48 h) of different water temperatures (15, 20 and $25^{\circ}C$) and salinities (30, 25, 20 and 15 psu) to understand reasons for the death of abalone exposed by low salinity water. In each water temperature, abalone spats that were exposed to low salinity water (less than 20 psu) for over 6 hours showed decrease in survival rate during recovery and those were exposed at the salinity of 15 psu for more than 24 hours all died. Histological observation showed expansion or damage of gills of the species which were exposed at less than 20 psu for over 6 hours. In case of abalones exposed at the salinity of 15 psu for over 24 hours, most gill tissues were destroyed. This result was glaringly obvious at a higher water temperature, lower salinity and longer exposure time. Accordingly, suffocation caused by damage of gills considered one of direct causes of the death.

The Acid Rock Drainage and Hydraulic Characteristics of the Waste Rock Dump (폐석적치장의 산성배수발생 및 수리특성 분석)

  • Cheong, Young Wook;Ji, Sang Woo;Yim, Gil Jae
    • Journal of the Korean GEO-environmental Society
    • /
    • v.5 no.4
    • /
    • pp.13-24
    • /
    • 2004
  • This study was carried out to plan the prevention of the generation and discharge of Acid Rock Drainage (ARD). The Acid Base Accounting(ABA) test was performed for geological materials such as pit wall, waste rock and stream sediments near the Imgi abandoned pyrophyllite mine in Busan, Korea. In addition, hydraulic characteristics were tested with the disk tension infiltrometer around the waste rock dump. Maximum Potential Acidity(MPA) of geological materials near the Imgi mine was 246.942kg $H_2SO_4/t$, and maximum Acid Neutralising Capacity(ANC) was 8.7kg $H_2SO_4/t$. These results indicate the pit wall and waste rock, except most of stream sediments are acid generating geological materials. These have salt and free hydrogen ion which resulted from oxidation of sulfides. Hence they could be convert rain water to acid rock drainage. Although the waste rock dump of the Imgi mine have very low infiltration rate, slopes of the waste rock dump have many "V" type erosion gullies and multi-layers. These gullies and multi-layers have coarse clastic particle layers which have very large hydraulic conductivity. Through this coarse clastic particle layer a large part of rain flow into ground. And also this layer could function as aeration path which induced oxidation of sulfide minerals and generation of ARD continuously.

  • PDF

The Fire Resistant Performance of RC Column with Confined Lateral Reinforcement According to Fire Exposure Condition (횡방향 철근으로 구속된 철근콘크리트 기둥의 화재 노출조건에 따른 내화성능)

  • Choi, Kwang Ho
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.6 no.4
    • /
    • pp.311-318
    • /
    • 2018
  • When reinforced concrete structures are exposed to fire, their mechanical properties such as compressive strength, elasticity coefficient and rebar yield strength, are degraded. Therefore, the structure's damage assessment is essential in determining whether to dismantle or augment the structure after a fire. In this study, the confinement effect of lateral reinforcement of RC column according to the numbers of fire exposure face and stirrup was verified by fire resistant test with the heating temperatures of $400^{\circ}C$, $600^{\circ}C$ and $800^{\circ}C$. The test results showed that the peak stress decreases and peak strain increases as the temperature is getting higher, also transverse ties are helpful in improving the compressive resistance of concrete subjected to high temperature. Based on the results of this study, the residual stress of confined concrete under thermal damage is higher at the condition of more lateral reinforcement ratio and less fire exposure faces. The decreasing ratio of elastic modulus of more confined and less exposure faces from the relationship of load and displacement was also smaller than that of opposite conditions.

Performance Evaluation of Bone Plates Consisted of BGF/PLA Composite Material according to Body Fluid Exposure Conditions (BGF/PLA 복합재료를 이용한 골절치료용 고정판의 체액 노출 조건에 따른 성능평가)

  • Jung, Kyung-Chae;Han, Min-Gu;Mehboob, Ali;Chang, Seung-Hwan
    • Composites Research
    • /
    • v.30 no.1
    • /
    • pp.21-25
    • /
    • 2017
  • The aim of this study is to fabricate composite bone plates consisted of unidirectional biodegradable glass fibers (BGF) and polylactic acid (PLA) and evaluate the performance of the composite bone plates according to the temperature ($50.0^{\circ}C$) of PBS (Phosphate Buffer Saline) solution and exposure time (0~3 weeks). Mechanical characteristics, such as bending stiffness, flexural strength, water uptake and mass loss, were investigated and the results showed that mechanical properties of the plates decreased as soaking duration increased due to loss of composite material.

Factors associated with the survival and marginal bone loss of dental implants: a 5-year retrospective study (임플란트의 생존과 변연골 소실에 영향을 미치는 인자들)

  • Song, Eul-Rak;Lee, Jae-Kwan;Um, Heung-Sik;Park, Se-Hwan;Chang, Beom-Seok
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.32 no.4
    • /
    • pp.280-292
    • /
    • 2016
  • Purpose: The purpose of this study was to compare the long-term survival rate and peri-implant marginal bone loss related to multiple risk factors including the clinician's experience. Materials and Methods: Four hundred twenty implants in 146 patients, who had involved a supportive periodontal therapy program every 3 to 6 months and had follow up data for at least 5 years, were selected as the study group. Peri-implant marginal bone loss, data of demographic, implant and surgical characteristics were collected from peri-apical radiographs and chart review. Implant survival was regarded as the remaining with radiographic marginal bone level in excess of 50% of the fixture length for any reason. Results: The cumulative survival rate after 5 years of loading was 94.9%. In binary logistic regression analysis, smoking status (P = 0.033) and presence of spontaneous cover screw exposure (P < 0.001) were significantly related to 5-year survival of implants. In stepwise multiple regression analysis, smoking status (P < 0.001), type of abutment connection (P < 0.001) and implant surface (P = 0.033) were significantly related to peri-implant marginal bone level. And the year of resident was not statistically related to 5-year implant survival in simple logistic regression analysis (P = 0.171). Conclusion: Smoking status, spontaneous cover screw exposure, type of abutment connection and implant surface might influence the implant success. There was no significant correlation between the year of resident and implant failure.

Sister Chromatid Exchange (SCE) Frequency and In Vitro Development of Mouse Zygote Cryopreserved by Vitrification (초자화 동결에 의한 생쥐 1-세포기배의 체외 발달과 SCE 빈도)

  • Kim, M.K.;Baik, C.S.;Uhm, S.J.;Kim, E.Y.;Yoon, S.H.;Park, S.P.;Chung, K.S.;Lim, J.H.
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.23 no.3
    • /
    • pp.379-384
    • /
    • 1996
  • This study was undertaken to investigate the sister chromatid exchange (SCE) frequency and embryonic development after exposure to cryoprotectants and vitrification of mouse zygotes. Mouse IVF zygotes were cryopreserved by vitrification using vitrification solution, EFS40 (40% ethylene glycol, 30% Ficoll and 0.3 M sucrose in phosphate buffer saline containing 10% FBS). After mouse zygotes were exposed to EFS40 at $25^{\circ}C$ for 30 sec., they were immediately plunged into $LN_2$ or cultured for cryoprotectant toxicity test without freezing. The results obtained in these experiments were summarized as follows: After thawing, survival rates to the 2-cell stage of zygotes exposed to or vitrified in EFS 40 (98.5%, 95.2%) were not significantly difference compared with that of control (100%). However, the developmental rates upto blastocyst and hatching blastocyst in vitrified groups (66.7, 50.0%) were lower than those of control (93.9, 81.8%) or exposed group (94.0, 78.8%) (p<0.05). When the influence of vitrification and exposure to cryoprotectant on the in vitro development of mouse zygotes was assessed by the SCE frequency, the SCE frequency in exposed ($20.2{\pm}2.1$) to or vitrified embryos ($21.4{\pm}3.2$) was higher than that in control embryos ($16.8{\pm}1.5$). These results suggest that the frequency of SCE was increased after cryoprotectant exposure or Vitrification although developmental rates of zygotes upto blastocysts and /or hatching blastocysts were not afected by cryoprotectant.

  • PDF

Influence of Thermal Aging on the Properties of Polyurethane Coating of Waterproof. (우레탄 도막 방수재의 열열화 특성)

  • Kim, Sung-Rae;Shin, Hong-Chol;Shin, Ju-Jae;Kim, Young-Geun
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.11a
    • /
    • pp.931-934
    • /
    • 2008
  • Polyurethane apply to the waterproof widely. Polyurethane rubbers are prepared that the influences of a thermal aging on the properties are investigated. Polyol and Polyisocyanate were varied ratio in the range mixed by using individual product that was vulcanized by a hot. The waterproofs of Polyurethane were investigated about tensile strength, tear strength and elongation after the thermal Aging for 168, 336, 504 hrs at 70$^{\circ}$C and 80$^{\circ}$C in the air oven. As the increase of the thermal aging time, tensile strength, tear strength and elongation were reduced.

  • PDF