• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1186-1189
• /
• 2009

본 논문에서는 이동 애드 혹 네트워크의 성능 개선을 위한 방안으로 네트워크 중간에 고정 노드를 부가하여 어느 정도의 성능 향상이 있는지를 모의 실험을 통하여 평가하였다. 모의 실험 결과 이동 노드만을 사용했을 경우보다 고정노드를 함께 사용했을 때의 성능이 더 뛰어남을 알 수 있었고, 이동 노드의 이동 속도에 따른 비교에서도 고정 노드를 함께 사용한 경우가 성능이 더 뛰어남을 확인할 수 있었다. 또한 고정 노드의 개수에 따른 성능평가에서는 고정 노드를 여러 대 사용할수록 지연시간이 단축됨을 확인 할 수 있었다. 본 연구에서 제안한 방식은 이동 애드 혹 네트워크의 중간에 고정 노드를 부가하여야 하는 문제가 있으나, 비용과 처리율과의 관계를 비교한 후 비용 상승에도 불구하고 보다 높은 신뢰성과 빠른 처리율을 원하는 네트워크에 사용하면 효과적일 것이다. 향 후 본 절의 연구 결과에 이어서 애드 혹 네트워크에 몇 대의 고정 노드를 추가해야 하는지에 대한 연구가 이루어진다면 보다 높은 신뢰성을 가진 애드 혹 네트워크가 구축될 수 있을 것이다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.33-39
• /
• 2007

LonWorks over IP (LonWorks/IP) virtual device network (VDN) is an integrated form of LonWorks device network and IP data network. LonWorks/IP VDN can offer ubiquitous access to the information on the factory floor and make it possible for the predictive and preventive maintenance on the factory floor. Timely response is inevitable for predictive and preventive maintenance on the factory floor under the real-time distributed control. The network induced uncertain time delay deteriorates the performance and stability of the real-time distributed control system on LonWorks/IP virtual device network. Therefore, in order to guarantee the stability and to improve the performance of the networked distributed control system the time-varying uncertain time delay needs to be compensated for. In this paper, under the real-time distributed control on LonWorks/IP VDN with uncertain time delay, a control scheme based on disturbance observer and ZPETC(Zero Phase Error Tracking Controller) phase lag compensator is proposed and tested through computer simulation. The result of the proposed control is compared with that of internal model controller (IMC) based on Smith predictor and disturbance observer. It is shown that the proposed control scheme is disturbance and noise tolerant and can significantly improve the stability and the tracking performance of the periodic reference. Therefore, the proposed control scheme is well suited for the distributed servo control for predictive maintenance on LonWorks/IP-based virtual device network with time-varying delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1311-1321
• /
• 2010

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In this paper, we propose SET(SendDoneEventbasedTransmission Technique)which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed. In SET, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission time. Therefore SET could provide high packet transmission rate given large amount of packets.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2004-2010
• /
• 2009

The characteristic of the backbond for distribution service in WMNs(Wireless Mesh Networks) is that WMNs has multiple links connected to mesh points and dynamic routing protocol such as AODV to establish routing paths. When the terminal is communicating with the service through new AP, mobile nodes can resume communication by setting only the link between new AP and mobile node in the case of existing WLANs, but WMNs needs path establishment process in multihop networks. Our goal in this paper is to support the seamless communication service by eliminating path establishment delay in WMNs. We present the method that eliminates the handover latency by predicting the location of handover using GPS information and making the paths to their destination in advance. We implement mesh nodes using embedded board that contains proposed handover method and evaluate performance of handover latency. Our experiment shows that handover delay time is decreased from 2.47 to 0.05 seconds and data loss rate is decreased from 20~35% in the existing method to 0~10% level.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.374-385
• /
• 2010

Wireless mesh networks can be deployed for various networks from home networking to last-mile broadband Internet access. Wireless mesh networks are composed of mesh routers and mesh clients. In these networks, static nodes form a multi-hop backbone of a large wireless access network that provides connectivity to end-users' mobile terminals. The network nodes cooperate with each other to relay data traffic to its destinations. In order to increase connectivity and better performance, researchers are getting interested in multi-channel and multi-interface wireless mesh networks. In these networks, non-overlapping multiple frequency channels are used simultaneously to increase the aggregate bandwidth available to end-users. Recently, researches have focused on finding suitable channel assignments for wireless network interfaces, equiped in a mesh node, together with efficient routing to improve overall system throughput in wireless mesh networks. This goal can be achieved by minimize channel interference. Less interference among using channels in a network guarantees more aggregated channel capacity and better connectivity of the networks. In this thesis, we propose interference aware channel assignment and routing algorithms for multi-channel multi-hop wireless mesh networks. We propose Channel Assignment and Routing algorithms using Traffic Profiles(CARTP) and Routing algorithms allowing detour routing(CARTP+2). Finally, we evaluate the performance of proposed algorithms in comparison to results from previous methods using ns-2 simulations. The simulation results show that our proposed algorithms can enhance the overall network performance in wireless mesh networks.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.242-245
• /
• 2021

시청자의 시점 위치를 선택하여 360VR 콘텐츠를 경험하는 다중시점 또는 자유시점 360VR 콘텐츠의 전송은 매우 높은 대역폭을 소비하게 된다. 특히 다중 사용자가 존재하는 셀룰러 환경에서는 특정 사용자에게 한정된 대역폭만을 할당할 수 있으므로 불가피하게 전송 품질 악화 또는 전송 지연을 겪게 된다. 다중시점(multi-viewpoint) 360VR 콘텐츠의 경우 시청자가 시점의 위치를 변경하면 해당 위치의 콘텐츠를 전송하므로, 한정된 대역폭이 주어지는 통신환경에서 시점을 이동할 때 마다 큰 전송 지연을 겪게되어 사용자 경험이 매우 떨어지는 것을 예상할 수 있다. 본 논문에서는 다시점 360 비디오에서 시점 변경을 시도할 때 전송지연을 줄이기 위하여 주변 위치의 영상을 적절히 Pre-Loading 하는 전송방식을 고려하고, 실질적인 5G 네트워크 환경에서 시점 변환에 따른 지연시간 성능을 분석하였다. 특정 수준 이하로 지연시간을 낮추기 위해서는 사용자 이동패턴에 대한 적절한 예측 기법이 요구되며, 정확도에 따른 지연시간 감소를 실험을 통하여 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.6 s.348
• /
• pp.30-38
• /
• 2006

In this paper, an algerian that provisions absolute and proportional differentiation of packet delays is proposed with an objective for enhancing quality of service (QoS) in future packet networks. It features a scheme that compensates the deviation for prediction on the traffic to be arrived continuously It predicts the traffic to be arrived at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot and derives the difference between them. The deviation is utilized to the delay control operation for the next time slot to offset it. As it compensates the prediction error continuously, it shows superior adaptability to the bursty traffic as well as the exponential traffic. It is demonstrated through simulation that the algorithm meets the quantitative delay bounds and shows superiority to the traffic fluctuation in comparison with the conventional non-adaptive mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.445-454
• /
• 2005

To measure the performance of call quality, we have built the experiment environment and observed that the delay caused by encapsulation between internet and VoIP telephones is under 5ms at most. The major delay is assumed to be the time required to capsulate the packet for tunnelling of VPN. Because the difference of average delay time is under $4ms{\sim}5ms$, the difference of call quality between VoIP and VoIP telephone adopting VPN is negligible. We have concluded that the capsulation process between PAC and PNS is the major factor influencing the network load by changing the number of fames in a packet during communication Also, we have concluded that the most suitable frame numbers is tow or three by adding the frame numbers in a packet to obtain the suitable frames in a packet and setting up end-to-end delay under 150ms.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.75-80
• /
• 2020

There are so many low power MAC protocols for wireless sensor network. IEEE802.15.4 among them has disadvantage of a large power consumption for synchronization. To save power consumption it use the superframe operation alternating sleep mode and awake mode. But latency is longer result from superframe operation. B-MAC can have shorter latency according to check interval. But transmitter consumes more power because of long preamble. And receiver is suffering from overhearing. In this paper, we use the adaptive check interval scheme[1] of B-MAC for enhancing the power consumption. Its maximum throughput and minimum delay is evaluated by comparing the proposed scheme with a typical single channel IEEE802.15.4.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.667-676
• /
• 1995

In ATM traffic multiplexing, the cell clumping and the cell dispersion are occured due to the cell delay variance(CDV) which changes the traffic characteristics. These cell variances increase the burstiness of t.he cell streams and make the network congested. The function of the traffic shaping is necessary to transmit the input streams into the networks or into the traffic policing schemes with some intevals. Most of the existing studies regard the input traffics as the traffic with the identical characteristics. In this study, the traffic shaping is processed by considering the traffic characteristICS with t.he loss-sensitive traffic and the delay-sensitive traffic. The traffic shaping model and the traffic shaping algorithm which considers the" characteristics of input streams have been presented. The traffic effect On t.he CDV size is also studied. The proposed scheme is compared to Virtual Scheduling Algorithm(VSA) and the efficiency of the proposed scheme is evaluated. According to the simulation results, t.he mean delay is decreased about 12% in delay-sensitive traffic and the traffic burstiness is decreased about 11 % in loss-sensitive traffic.