• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.131-134
• /
• 2001

합성섬유의 방사공정 중 하나인 연신 공정은 섬유의 성질을 향상시키기 위해 고화된 상태의 섬유를 신장하는 공정이다. 연신할 때 변형이 국부적으로 일어나는 네킹이 일반적으로 관찰되는데, 이 현상은 방사 공정 후에 일어나는, 합성섬유의 역학적 성질과 미세구조에 큰 영향을 미친다[1]. 본 논문에서는 네킹을 분자 구조의 변화에 대한고려 없이 거시적인 관점에서 해석하였다. (중략)

• Journal of the Korean Geotechnical Society
• /
• v.36 no.5
• /
• pp.25-34
• /
• 2020

Studies on nondestructive evaluation methods using electromagnetic waves have been commonly conducted to evaluate necking defects in bored piles. However, the propagation of electromagnetic waves are affected by water contents of surrounding materials. This study aims to investigate a suitability of electromagnetic waves for evaluating necking defects in bored piles embedded in sandy soils through laboratory experiments. Laboratory experiments are performed with a model pile having a necking defect. The diameter and length of model pile are 600 mm and 1 m, respectively, and the model pile is embedded in sandy soils with different water contents of 10%, 20%, and 30%. For the propagation of electromagnetic waves, a transmission line is configured in reinforcement cage using an electrical wire. The generation and detection of electromagnetic waves are conducted using a time domain reflectometer. Experimental results show that the peak amplitude of electromagnetic waves reflected at the necking defect decreases with an increase in the water content in sandy soils. In addition, the velocity of electromagnetic waves reflected from the toe of the model pile decreases win an increase in the water content. However, estimated locations of the necking defects are almost the same to that of the actual location of the necking defect. This study demonstrates that electromagnetic waves may be an effective method for evaluating necking defects in bored piles embedded in sandy soils

• The Korean Journal of Rheology
• /
• v.6 no.2
• /
• pp.139-146
• /
• 1994

미연신, 비결정 PET 필름의 띠연신조건(띠연신 응력, 띠연신 온도, 띠열판의 상승속 도)에 따른 필름의거동을 연구하였다. 띠열판의 상승속도가 10, 20, 30, 50 mm/min일 때 온 도(Td) 이하에서는 임계네킹응력이 띠연신 온도가 증가함에 따라 급격히 감소하고 그 온도 이상에서는 거의 변하지 않고 일정했으며 임계온도 이하에서는 임계온도와 띠연신 온도의 온도차(Tc-Td)가 임계네킹응력과 비례관계를 가져 다음과 같은 간단한 실험식을 얻었다. $\sigma$c=0.838 (Tc-Td)+$\sigma$0 임계네킹응력에서 띠연신한 필름의 치수는 연신 온도와 띠열판의 상 승속도에 거의 의존하지 않고 일정한 값을 나타내었다. 임계네킹응력 이상에서는 연신 조건 에 따라 필름의 폭, 두께, 그리고 연신비가 거의 변하지 않았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.25-31
• /
• 2011

In the tensile test necking occurs at the maximum load point and non-uniform stress state is generated in this section. The equivalent stress becomes quite different from the axial stress as necking proceeds. Methods for obtaining the true stress-true strain curves, by overcoming difficulties due to the necking phenomena, have been developed by many authors. One of the methods based on the finite element analysis simulation is a very promising method. In this paper, general-purpose finite element program is used to simulate the tensile test. A round specimen and a flat specimen prepared from the same steel block are tested and simulated. The true stress-true strain curves are determined without assuming that the material follows Hollomon's law.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.3
• /
• pp.271-278
• /
• 2008

A study has been conducted on the bulging process of liquid rocket engine nozzle which is essential to the manufacturing regenerative cooling combustion chamber. Mechanical properties of the material used for the bulging were experimentally obtained by tension tests. Deformation of the bulged nozzle was confirmed by a structural analysis. The developed bulging process and the deformation analysis result were confirmed by manufacturing of the bulged nozzle specimens and the bulging test. There has been a bulging failure among 7 bulged specimens due to the necking of the material. The cause of necking was investigated by comparing microstructure of the material. The investigation has revealed grain size of the material has considerable effect on the occurrence of the necking.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1054-1064
• /
• 2009

In this work, we predict a true fracture strain using load-displacement curves from tensile test and finite element analysis (FEA), and suggest a method for acquiring true stress-strain (SS) curves by predicted fracture strain. We first derived the true SS curve up to necking point from load-displacement curve. As the beginning, the posterior necking part of true SS curve is linearly extrapolated with the slope at necking point. The whole SS curve is then adopted for FE simulation of tensile test. The Bridgman factor or suitable plate correction factors are applied to pre and post FEA. In the load-true strain curve from FEA, the true fracture strain is determined as the matching point to test fracture load. The determined true strain is validated by comparing with test fracture strain. Finally, we complete the true SS curve by combining the prior necking part and linear part, the latter of which connects necking and predicted fracture points.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.4
• /
• pp.27-35
• /
• 2018

The objective of this study is to demonstrate the suitability of electromagnetic waves for evaluating necking defects in bored piles using electromagnetic waves. Experiments are conducted with small-scaled defective model pile with diameter of 150 mm and length of 270 mm. Two necking defects are generated at the upper and lower positions on two different sides of the model pile, respectively. The other two necking defects are generated at the upper and lower positions on the same side of the model pile. Electrical wires are installed alongside the stainless steel wire of a steel cage to configure a two-conductor transmission line. A time-domain reflectometer is used to generate and defect electromagnetic waves. The experimental results show that electromagnetic waves are reflected at the necking defects and the end of the model pile. In addition, calculated defect locations are almost the same as actual defect locations. This study demonstrates that electromagnetic waves can be effective tool for evaluating necking defects in bored piles.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.188-189
• /
• 2013

전기분무 증착법(electrospray deposition)으로 형성된 실리카($SiO_2$) 코팅층의 경우 단순한 입자들의 응집체이므로 초소수성의 높은 접촉각을 보이지만 약한 접합력으로 인하여 실제 응용에 제한이 있다. 본 연구에서는 고온 열처리를 통한 실리카 입자간의 네킹(necking)현상을 이용하여 실리카 코팅층의 네킹을 유도하여 접합력이 향상된 실리카 코팅층을 얻고자 하였으며, 이 코팅층의 초소수 특성을 평가하였다. 적절한 온도 범위에서의 열처리는 표면 거칠기와 접합력 측면에서 모두 좋은 특성을 보였고, 최종적으로는 불소화 처리를 하여 접합력이 향상된 실리카 초소수성 코팅층을 형성할 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1197-1198
• /
• 2010

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.818-823
• /
• 2012

In order to predict necking behaviour of aluminium sheets, a crystal plasticity model is introduced in the finite element analysis of tensile test. Due to the computational limits of time and memory, only a small part of tensile specimen is subjected to the analysis. Grains having different orientations are subjected to numerical tensile tests and each grain is discretized by many elements. In order to predict the sudden drop of load carrying capacity after necking, a well-known Cockcroft-Latham damage model is introduced. The mismatch of grain orientation causes stress concentration at several points and damage is evolved at these points. This phenomenon is similar to void nucleation. In the same way, void growth and void coalescence behaviours are well predicted in the analysis. For the comparison of prediction capability of necking, same model is subjected to finite element analysis using uniform material properties of polycrystal with and without damage. As a result, it is shown that the crystal plasticity model can be used in prediction of necking and fracture behavior of materials accurately.