• Journal of Hydrogen and New Energy
• /
• v.30 no.2
• /
• pp.136-146
• /
• 2019

A solid oxide fuel cell (SOFC) based hybrid desiccant cooling system model is developed to study the effect of fuel utilization rate of the SOFC on the reduction of energy consumption and $CO_2$ emission. The SOFC-based hybrid desiccant cooling system consists of an SOFC system and a Hybrid desiccant cooling system (HDCS). The SOFC system includes a stack and balance of plant (BOP), and HDCS. The HDCS consists of desiccant rotor, indirect evaporative cooler, electric heat pump (EHP), and heat exchangers. In this study, using energy load data of a commercial office building and SOFC-based HDCS model, the amount of ton of oil equivalent (TOE) and ton of $CO_2$ ($tCO_2$) are calculated and compared with the TOE and $tCO_2$ generation of the EHP using grid electricity.

• Journal of Navigation and Port Research
• /
• v.35 no.3
• /
• pp.265-270
• /
• 2011

The purpose of this study is to compare and analyze the differences of a building's heating and cooling loads depending on the weather variation. Followings are the results. The temperature, humidity and wind speeds of standard year are bigger than those of 2006~2009. The 2006~2009's total horizontal solar irradiance is greater than that of standard year, and the direct solar irradiance of standard year is bigger in winter and vice versa in summer. As results of simulation on heating and cooling loads, it is difficult to find out the bilateral influences between maximum thermal loads and annual's. The equivalent-time operating ratio(EOR) is defined on this study to estimate the differences between year and year, and the EOR of standard year shows low value comparing to 2006~2009 years'.

• The Magazine for Energy Service Companies
• /
• s.15
• /
• pp.22-25
• /
• 2002

터미널과 상가로 구성된 서울고속버스터미널은 지난해 건물 냉방을 위한 빙축열시스템과 보일러 스케일방지를 위한 자동 블로우다운 시스템 설치공사를 ESCO사업을 통해 실시했다. 재작년에는 ESCO 고효율조명 교체사업을 마쳤다. 준공이후 설비개체를 하지 않아 노후된 시설이 많았던 터라 이곳 관계자들은 ESCO사업을 통해 에너지비용을 줄이고 훨씬 쾌적한 내부환경을 건물 이용자들에게 제공해줄 수 있게 된 결과에 매우 만족해했다.

• The Magazine for Energy Service Companies
• /
• s.23
• /
• pp.28-29
• /
• 2003

폐열을 이용한 히트펌프시스템은 에너지절감효과는 냉방시 $45\%$, 난방시 $75\%$, 급탕부하시 $67\%$정도이어서 가히 타의추종을 불허한다. 한국적 상황을 고려한 국내 최초의 폐열이용 히트펌프시스템이 될 이 사업의 투자비회수기간은 2.5년에 불과해 향후 휴양 및 숙박시설 등지에 큰 관심을 끌 것으로 최사장은 기대하고 있다.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.15 no.4
• /
• pp.39-45
• /
• 2019

The operational conditions such as cooling tower water pump flow rate, cooling tower fan flow rate, and chiller capacity in heat source equipment, and supply air temperature and chilled water temperature in air conditioner are considered to study the effects on energy consumption for central cooling system by using TRNSYS program. As a result, the optimal values of supply air temperature and chilled water temperature for minimal total energy consumption are 12℃ and 8℃. And if maximum values of cooling tower water pump and fan flow rate is decreased from 100% to 40%, energy consumptions are increased 170MJ/day and 63.2MJ/day, respectively.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1997.10a
• /
• pp.85-92
• /
• 1997

R22 대체냉매로 R410A를 사용하는 가정용 분리형 에어컨의 성능을 향상시키기 위한 연구를 실험적으로 수행하였다. R22 시스템에서 냉매와 압축기의 오일만 교체할 경우 기본시스템에 비해 냉방능력은 17% 증가하였고 에너지 소비효율은 29% 감소하였다. 이를 해결하기 위해 고압냉매 R410A에 적합한 압축기와 시스템의 효율을 향상시키기 위한 고효율 응축기를 개발하였다. R410A 압축기와 고효율 응축기를 R410A 시스템에 적용할 경우 냉방능력과 효율이 R22 시스템에 비해 각각 1.8% 와 2.2% 증가하였으며, 소음도 R22 시스템과 동등한 수준을 나타내었다.

• Journal of Energy Engineering
• /
• v.3 no.1
• /
• pp.44-53
• /
• 1994

STELF 기술의 핵심의 되는 IMPEX 블록의 잔류 공급률, 겉보기 밀도, 흑연의 혼합비 등 여러 가지 주요 변수가 블록의 특성에 미치는 영향을 조사하여 실제 반응기를 설계하는데 필요한 자료를 구하였다. 대표적인 염들에 대하여 물질전달 및 열전달 문제를 일으키지 않는 영역에서 최소의 부피를 갖는 값들을 계산하였고, 각각의 물질이 갖는 특정 전도도에서의 최대 냉방 및 난방 에너지 밀도를 계산하였다. 이로부터 얻은 값들을 8시간 동안 사용할 수 있는 6kW 냉방용 반응기 설계에 적용하여 본 결과 SrCL2-8/1 NH3가 최적의 염임을 확인하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.3
• /
• pp.204-216
• /
• 1992

In most cases, EER(Energy Efficiency Ratio) is available to present energy efficiency of air-conditioners. But, EER is not adapt to measure energy efficiency at actual life environment because it is based on fixed temperature and humidity contditions. To overcome this disadvantage, there is need to introduce SEER(Seasonal Energy Efficiency Ratio) established at time varient temperature and humidity conditions. In this paper, SEER measurement method and conditions based on actual life environment of the country is introduced, and discussed SEER value about two air-conditioner type, that is, non inverter air-conditioner and inverter air-conditioner. As a result of, inverter air-conditioner was superior to non inverter air-conditioner at cooling seasonal energy efficiency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.8
• /
• pp.530-537
• /
• 2010

With the advancement of technology, the density of IT equipment, heat load and power consumption continue to increase in high density internal-load dominated buildings as datacenters. To improve the HVAC system's energy performance and efficiency, there is a need to find methods of using outside air. Through cooling tower control that is based on outside wet-bulb temperature, the water-side economizer made it possible to achieve a maximum energy performance improvement of about 16.6% over the basic chilled water system, whereas the air-side economizer, through control based on outdoor air enthalpy, made it possible to achieve about 42.4% improvement.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.119-123
• /
• 2005

The main purpose of this study is to define an optimum slope of the roof that demands minimum cooling load of the building, when the roof is affected by the solar and wind energy. Two different roof shapes were chosen: hip, gabled. The cooling load of building having those roof shapes was calculated through the computer simulation, using DOE program. For the simulation, the angle of the roof and angle of the orientation was changed. In the conclusion of this paper, an optimum slope of the roof which causes minimize cooling load is presented according to the roof shape and orientation. The result of this study could provide a practical design guideline for determining the roof angle for various climatic conditions.