• Journal of the KSME
• /
• v.35 no.7
• /
• pp.638-646
• /
• 1995

직접접촉 얼교환 기술은 냉각탑, 접촉급수 가열기 및 공기분리기 등과 같은 장치에 예전부터 이용되어 왔는데, 그 주요한 적용이유는 가열유체와 수열유체의 사이에 일어나는 전열이 일반 열교환기와는 달리 고체벽(금속 열전달표면)을 통과하지 않고 열교환을 함으로써, 종래의 열교 환기에 비하여 상대적으로 설비의 간단화, 부식 및 스케일 부착문제가 경감됨에 따른 적은 유 지보수비 및 높은 열전달률을 얻을수 있는 이점이 있으며, 저 온도차에서의 효율적인 사용이 가능하기 때문이다. 이 글에서는 직접접촉응축 현상의 장점을 이용하는 직접접촉식 교환기의 구조와 형태, 그리고 그 응용분야에 대해서 알아보고자 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.72-78
• /
• 2022

A vacuum brazed cooling passage for an aircraft engine controller was designed. In order to predict the total pressure loss, which is the main design factor of the cooling passage, theoretical and numerical methods for the major loss and the minor loss considering the overall shape of the cooling passage are presented. This design and evaluation method can predict the pressure loss of the complex cooling passage shape for various flow conditions at the initial design step.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.199-206
• /
• 1995

200kW급 가스엔진 열병합시스템에서 엔진 냉각수는 엔진을 냉각시키는 기능 뿐아니라 배열회수용 열원으로 사용된다. 전력부하나 냉·난방 부하가 변할 때 엔진 냉각수의 온도가 민감하게 변하므로 이를 일정하게 제어하기 위하여 PID 제어기를 사용하고 있다. 본 연구는 이 제어기의 적정 이득값(gain)을 설정하기 위하여 공정 전달함수를 실험적방법을 이용하여 일차시간지연함수(First Order Plus Dead Time)로 근사한 후 여러 조율방법을 사용하여 이득값을 구하였다. 이 이득값과 전달함수를 가지고 공정모사기인 “MATLAB”을 사용하여 시스템에 적합한 적정이득값을 선정 하였으며 실증실험 결과 시스템의 온도동특성이 안정됨을 보였다.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.485-490
• /
• 2004

Crude corn oil (CCO) was obtained through the expression-extraction process from corn germ. The CCOs of final process at $90^{\circ}C,\;70^{\circ}C\;and\;50^{\circ}C$ were stored in outdoor storage tanks. From the samples, refined CCO (RCCO) were prepared with $0\%,\;10\%\;and\;20\%$ excessive of phosphoric acid, caustic solution and acidic clay were used in degumming-alkali refining-bleaching process. RCCOs were stored at room temperature in dark places. The color change was not effected by the amount of phosphoric acid, caustic solution and acidic clay, but temperature of process affects the color change. Finally, the prevention for color reversion of RCCO could be obtained by lowering the temperature of final process and optimal temperature of RCCO in summer was found about less than $50^{\circ}C$.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.16-17
• /
• 2002

최근 3-준위 원자계에서 원자 결맞음에 관련된 현상에 대해 많은 연구가 이루어지고 있다. 전자기 유도 투과, 전자기 유도 흡수, 밀도 반전 없는 레이저 발진, 선폭이 좁은 공진에 의한 큰 굴절률의 실현, 저광속, 초광속, 초저온 원자 냉각 현상들은 원자 결맞음과 관련된 현상들이다. 3준위 원자계는 계단형, V 형, ∧ 형으로 분류할 수 있는데, ∧ 형의 3준위 원자계는 바닥상태간의 간섭성이 오래 지속될 수 있으므로 ∧ 형의 3준위 원자계가 실질적으로 많이 연구되고 있다. (중략)

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.18-28
• /
• 1984

디이젤 엔진은 피스톤이 실린더 내를 왕복 운동하면서 압축행정에서 연료의 연소에 의해 발생된 고열을 받아 고온에서 작동되기 때문에 피스톤 헤드에서 받은 열은 속히 아래부분으로 전달시 키고 동시에 실린더 벽으로 전달되게 하여야 한다. 여기서 열이 문제가 되는 요소를 생각해 보면, (1) 고압 : 연소 최고폭발압력이 높기 때문에 압력상승률도 커져 격렬한 연소상태가 된다. (2) 고온 : 격심한 가스 유동과 실린더 직경이 크기 때문에 피스톤 헤드부의 온도가 높아진다. (3) 연소생성물 중에 엔진 및 윤활유에 악 영향을 주는 성분이 많다. (4) 경량, 저가격 구조 때문에 열적 및 역학적 변형이 일어나기 쉽다. (5) 사용조건이 가혹해 연료가 이상 현상을 가져온다. 위의 요소들을 가지고 온도의 분포, 열의 전달과정, 피스톤 냉각 등에 대해서 알아본다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.8-14
• /
• 2017

Improvements in the standard of living and lifestyle have led to increased sales of frozen milk products, such as soft ice cream or slush. These frozen milk products are commonly made in a small refrigeration machine. In a soft ice cream machine, the freezer is composed of a concentric cylinder, where the refrigerant flows in the annul us and the ice cream is made in the cylinder by a rotating scraper. In this study, an optimization and performance evaluation were conducted on a soft ice cream machine having a freezer volume of 2.8 liters. The optimization was focused on the scraper rotation speed and the refrigerant path of the freezer. The measurements included the temperature, pressure and consumed power. At the optimized speed of 124 rpm, ice cream was produced in 6 minutes and 2 seconds, and the COP was 0.90. Through a flow visualization study using air-water, the refrigerant path was improved. The improved design reduced the ice cream making time significantly. The present results may be used for the optimization of other refrigeration cycles, including those of frozen food products.

• Food Science of Animal Resources
• /
• v.24 no.1
• /
• pp.92-96
• /
• 2004

pH, Campylobacter spp., Salmonella spp. and Escherichia coli of under-utilized broiler viscera silage added with table sugar during storage at 25$^{\circ}C$ were investigated. pH of silage with 0 and 1 %(w/w) table sugar increased continuously after day 2, but that of 3, 4 and 5% remained 4.0∼4.2 after decrease from 5.2 at day 0. The Campylobacter spp. count of 0% was 8.21 at day 4, however that of 3 and 5% showed 7.56 and 7.38 logCFU/mL, respectively. The Salmonella spp. of 0% maintained 5.8∼6.8 logCFU/mL during fermentation, but that of 3 and 5% was not detected after day 4. The initial E. coli count of silage without table sugar was 5.8 log CFU/mL, but reduced to 4.1 log CFU/mL at day 2, and maintained at the level between 4.0 and 5.0 log CFU/mL, thereafter. However, E. coli was not detected in the silage with 3 and 5% table sugar after day 2. The counts of Campylobacter spp., Salmonella spp. and Escherichia coli of under-utilized broiler viscera silage reduced markedly by adding table sugar. It was proved that the possibility of microbiologically safe broiler offal silage as a potential resource for animal feed materials was improved.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.36-42
• /
• 2020

Nowadays, the touch screen panel (TSP) cover glass for mobile smart devices is being developed with a curved glass shape due to different design requirements. Because the sizes of mobile smart devices continue to increase, there has also been a great increase in the demand for large-area curved glass greater than 20 inches. In this study, heat and fluid flow analysis using CFD was performed to optimize the heating surface temperature distribution of the large curved glass formation system. Five cooling water flow paths in the cooling block were designed and analyzed for each case. A function that can quantitatively calculate the temperature uniformity of the heating surface was proposed and these values were obtained for the five models. The temperature distributions of the heating surface and the energy consumption of the heating system were also compared and comprehensively analyzed. Based on the analysis results of the five different cooling channel path models, the optimal path design could be presented.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.1-14
• /
• 1997

Natural convection cooling of discrete heaters located in a two-dimensional vertical open top cavity is investigated experimentally. The five discrete heaters with same heat generation are located on the wall of the cavity. The heaters are arranged in two configurations; flush-mounted on a vertical wall and protruding from the wall about 4.5 mm. The materials used for the vertical walls are copper and epoxy-resin, and air is used as the cooling fluid. The temperature and flow fields in the cavity were visualized by means of Mach-Zehnder interferometer and smoke-method. Also, local temperature measurements are made along the vertical wall. Results are obtained for cavity aspect ratios of 4.6, 7.5 and 9.5 and modified Rayleigh numbers ranging from 10$^{3}$ to 10$^{6}$ . Results indicate that the cooling efficiency for the copper wall is superior to that of the epoxy-resin. For the epoxy-resin wall, the protrusion of the heaters plays a role in decreasing the heat transfer performance. The location of maximum temperature is significantly influenced by the wall materials and heater configurations. Correlations relating the Nusselt number to the modified Rayleigh number are proposed.