• Journal of Chest Surgery
• /
• v.38 no.1 s.246
• /
• pp.29-37
• /
• 2005

This study was prospectively designed to determine the physiologic effects of normothermic CPB and to compare its influences with hypothermic CPB. Material and Method: Thirty-six adult patients scheduled for el­ective cardiac surgery were randomly assigned to moderate hypothermic (hypothermic group nasopharyngeal tem­perature $26\~28^{\circ}C,\;n=18)$ ornormothermic (normothermic group, nasopharyngeal temperature > $35.5^{\circ}C\;n=18)$ CPB. Arterial blood samples were taken before CPB (Pre-CPB), 10 minutes after the start of CPB (CPB-10), and imme­diately after CPB stop (CPB-off) for determining total leukocyte counts, neuron-specific enolase (NSE), interleukin-6 (IL-6), endothelin-1 (ET-1), cortisol, troponin I (TNI), aspartate aminotransferase (AST), alanine aminotransferase (ALT), creatinine, blood urea nitrogen (BUN), and the pulmonary index $(Pi,\;PaO_{2}/FiO_{2}),$Other parameters such as urine output, mechanical ventilating period, ICU-staying period, postoperative complications and hospitalized days were also evaluated. Result: Total leukocyte counts, increased rate in NSE, in IL-6 and in cortisol at CPB-10 and CPB-off were significantly higher in normothermic group than in hyphothermic group. Urine output during CPB was lower in normothermic group than in hyphothermic group. The duration of mechanical ventilation, ICU-stay, and hospitalization were longer in normothermic group than in hyphothermic group. Conclusion: These findings sug­gested that normothermic CPB caused higher inflammatory and stress responses than hypothermic CPB during car­diac surgery using cold crystalloid cardioplegia. However, further studies with large number of cases should be carried out to validate this hypothesis.

• Applied Biological Chemistry
• /
• v.27 no.2
• /
• pp.79-85
• /
• 1984

The physicochemical properties of starch isolated from two kinds of waxy barley were investigated. The average diameters of starch granules of Changyoung and Smire were 13.6 and 16.6 microns, respectively, and most of starch granules were round shape. X-ray diffraction patterns of two samples were A-types and amylose contents of two waxy barley starches were 4%, blue values and alkali numbers of Changyoung and Smire were 0.22 and 0.18, 5.2 and 4.0, raising powers of them were 167 and 173, respectively. The optical transmitance of 0.1% suspension of waxy barley starches increased rapidly from $51^{\circ}C\;to\;75^{\circ}C$. Amylogram data on 5% of Changyoung and Smire starch solutions showed the gelatinization temperature of 63 and $62^{\circ}C$, maximum peak hight of 920 and 900 B.U., respectively. Waxy barley starches had higher swelling powers than non waxy barley starch. The starch pastes prepared from waxy barleys retrograded much slower than that of non waxy barley.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.402-410
• /
• 2012

A two-loop Rankine cycle for engine waste heat recovery of gasoline vehicle has been investigated. Water-steam cycle as a high-temperature (HT) loop for exhaust gas heat recovery and R-134a cycle as a low-temperature (LT) loop for both heat recovery of the engine coolant and the residual heat from the HT loop were considered. Energy and exergy analysis was performed to investigate the performance of the system. Because two volumetric expanders are used for the HT and LT loop, the sizes of two expanders are very important for the optimization of the system. The effects of pressure ratio of the HT loop, considering the size of the HT expander, and the condensation temperature of LT loop on the performance of the system at a target engine condition were investigated. This study shows that about 20% of additional power from the engine waste heat recovery can be obtained at the target engine condition.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.3-3
• /
• 1998

액체추진제 로켓엔진 연소실에는 고유모드에 대응하는 음향파동이 내재되며 이러한 음향파동은 연소와의 상호작용을 통하여 불안정한 음향에너지를 공급받아 증폭되며 결국에는 연소불안정 상태에까지 이르게 된다. 이와 같은 불안정한 상태에 이르기 위해서는 연소로부터 되먹임되는 불안정 에너지의 양이 충분히 크고 구동 음향파동에 근접한 위상을 가져야 한다. 이와 같은 구동 메커니즘을 구성하는 상세한 물리적 현상들을 규명하고 예측하기 위한 많은 연구들이 보고되었으며, 이들 중 이론적인 시간 지연 모델을 사용하는 음향적인 방법은 매우 경제적인 반면 연소 현상에 대한 상세한 모사가 생략되어 연소 불안정의 구체적인 원인을 규명하는데 어려움이 있고, 파동 방정식에 의하여 연소실 내부의 파동 에너지 증가를 예측하는 방법은 연소기 내에서의 연소 메커니즘에 대한 고려 없이 연소에 의해 발생하는 에너지만을 포함하는 단점과 선형적인 연소 불안정에만 제한된다는 제한이 있다. 음향장과 커플된 기화반응 모델은 분무액적의 기화 과정이 추진제 연소의 지배과정이라는 가정 하에 연소응답을 기화반응으로 대체하는 방법으로, 역시 단시간 내에 결과를 얻을 수 있다는 장점이 있으나 기화반응으로부터 음향파동으로의 에너지 되먹임 과정이 배제되어 있어 정확한 결과를 구하기는 어렵다. 이에 대하여 최근에는 전산 모사적인 방법을 사용하는 대규모의 연소장 해석이 가능하여 짐으로써 음향파동에 의한 외란과 에너지 되먹임과정을 모두 포하마여 수치적인 방법을 사용하여 계산하는 액체추진제 로켓엔진의 고주파 연소불안정 해석방법들이 제시되고 있다.안정성 모드가 있음을 보였다. 밀도 변화가 있는 경우나 밀도 변화가 없는 경우 모두 sinuous 모드의 가장 불안정한 모드가 varicose 모드의 가장 불안정한 모드보다 더 불안정함을 보여주어 후류 유동은 자유 유동에 가까운 위상 속도를 가지는 sinuous 모드에 의해 지배될 것임을 예측할 수 있다. 연소반응이 완전연소에 가까울수록 그리고 압축성 효과가 클수록 유동내부의 온도가 증가하고 점성 또한 증가하여 후류유동은 안정됨을 알 수 있었다 유동변수들의 contour로부터 유동의 특성을 예측한 결과 baroclinic 항이 dilatational 항보다 상대적으로 크며, 중심선 상하에 생기는 vortex를 더욱 성장시킬 것으로 생각된다.냉각 홀의 막임, 연소 입자의 점착 부위 등을 예측하여 보완책을 준비할 수 있도록 하였다.$mm^2$sec였으며, 이는 다른 graphite/epixy 복합재의 확산계수와 유사한 값을 나타내고 있다. 또한 추진제가 충전된 연소관을 절단하여 밀폐한 후 95%RH 습도 조건에 보관함으로써 연소관 내부의 추진제 기계적 특성에 미치는 침투된 습기의 영향도 함께 고찰하였다. 추진제에 따라 차이는 있겠으나 추진제가 충전된 연소관은 순수 복합재 연소관에 비해 습기의 투과 정도가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.114-121
• /
• 2016

This study investigates a CFD modeling of the charge-discharge behavior due to heat generation during charge-discharge cycles of a Li-ion secondary battery(LIB). Present LIB system adopted a current-density equation, heat and mass transfer governing equations upon the 1-dimensional system to the thickness direction for the rectangular pouch configuration. According to the 3-kinds of the charge-discharge current densities of 1C($17.5A/m^2$), 3C($52.5A/m^2$) and 5C($87.5A/m^2$) subject to a 3 V of cut-off voltage, a constant-temperature system at 298 K and three different heat generating systems were analyzed with comparison. Battery capacity decreases with increment of charge-discharge densities not only at the constant-temperature system but also at the heat-generating system. The time for charge-discharge cycles increases at the heat-generating system compare to the constant-temperature system. These trends are considered that the increase of temperature due to heat generation causes the decrement of equilibrium potential of electrodes and the increment of diffusivity of Li ions. Furthermore, cooling effects were discussed in order to control the influence of heat generation due to charge-discharge behavior of a Li-ion secondary battery.

• Korean journal of food and cookery science
• /
• v.3 no.2
• /
• pp.59-67
• /
• 1987

In order to make use of Job's tears widely, Job's tears starch was analyzed and determinded the contents of amylose, amylographical and other physicochemical properties. And also the yeast breads and rice cakes were made from flour and rice flours with various mixing ratios of Job's tears flour and then they were tested for suitability to preparation of bread and rice cake. 1. The starch contents of Job's tears showed 12~20%. Which was about one third of rice or waxyrice starch. But amounts of crude proteins, fats, and total ashes in Job's tears were higher than rice or waxyrice. Job' tears starch was composed of amylopectins only, and was similar to that of waxyrice starch. 2. Depends upon the Amylogram of each starch, initial gelatinization temperature of Job's tears starch was the highest among three starches of rice, waxyrice, and Job's tears. Maximum viscosity of Job's tears starch was 860BU, then it was about two times of rice starch viscosity. 3. By the sensory evaluation results, the taste of bread prepared with mixing of 10% Job's tears flour was better than flour bread and the volume and grains of the bread made from mixing of 10%, 20% Job's tears flour were similar to that of flour bread, but the taste, volume and grains of bread made from 30% mixed flour were undesirable. The rice cake Prepared from mixed flour with 25% Job's tears flour has shown to be desirable.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.930-936
• /
• 2004

Effects of rice cultivars and degree of milling (DM) on composition, pasting properties, total phenolic contents, and distribution of phenolic acids were investigated. Rice and bran fractions with 94.4, 92.0, and 90.4% milling yields from brown rice of four cultivars (Odae, Nampyung, Chucheong, and Ilmi) were used. Fat and ash contents of milled rices decreased with increasing DM, whereas protein contents were not affected. In rice bran, differences in fat and ash contents by cultivars were higher than those caused by DM. With increasing DM, gelatinization temperature of rice flour decreased, whereas peak viscosity and hold viscosity at $95^{\circ}C$ increased. While cold viscosity, final viscosity, and setback varied among cultivars, DM had little effect. Total polyphenolic contents in brown rice, milled rice, and rice bran were 93.9-88.8, 30.3-71.9, and 310.0-541.6 mg catechin eq/100g, respectively. Major phenolic compounds were identified as ferulic and p-coumaric acids. Total phenolic content of brown rice (65.9-27.9 mg%) decreased with increasing DM, whereas ratio of ferulic acid composition increased. Chucheong and Ilmi varieties showed biggest reduction of phenolic acid contents by milling. In rice bran, ferulic and p-coumaric acids were 157.8-240.2 and 31.8-90.4 mg%, respectively. Contents of sinapinic, benzoic, and m-hydroxybenzoic acids in rice bran were higher than those of brown and milled rices.

• Korean Journal of Crystallography
• /
• v.4 no.2
• /
• pp.74-85
• /
• 1993

Single crystals of LiNbO3 have found extensive application in electro-optic and nonlinear optic devices. However, laser-induced refartive index inhomogeneities, which have been labeled opical damage impose limits on device optical damage in LiNbO3 is imporved if more than 4.5 rml% MgO is added to the melt The laser damage thrueshold increased as much as 100 times better then that of undoped crystals. The MgO doped cystal has thus been urterlsiv81y studied since then. In the study, Mgo:LiNbOs(MLA) single crystals dopsd with 0, 2.5, 5.0, 7.5, 10.0 mol% MgO have been grown by the czocrualski technique. The metls were prepared in the platinum crluible and 15∼20mm diameter crystals were grown with a length of 20∼30mm in a resitance heater. The growth rate was 2.5mm/hr, the rotation speed 15rpn. Before sawing MLN single crystals were annealed for 24 hours under atmosphere at a temperature of 1080℃. After sawing, we have found an annual ring cross section of MNA crystals only in the direction of perpendicilar to the c-axis. Nonuniform dispusion of MgO was pointed out that the cuties of the state of oxide were strongly affected by oxygen partial pressure in.

• Nuclear Engineering and Technology
• /
• v.14 no.4
• /
• pp.186-195
• /
• 1982

The steam line break accident for Kori Unit 1 is analyzed by a code SYSRAN which calculates nuclear power and heat flux using the point kinetics equation and the lumped-parameter model and calculates system transient using the mass and energy balance equation with the assumption of uniform reactor coolant system pressure. The 1.4 f $t^2$ steam line break accident is analyzed at EOL (End of Life), hot shutdown condition in which case the accident would be most severe. The steam discharge rate is assumed to follow the Moody critical flow model. The results reveal the peak heat flux of 38% of nominal full power value at 60 second after the accident initiates, which is higher than the FSAR result of 26%. Trends for the transient are in good agreement with FSAR results. A sensitivity study shows that this accident is most sensitive to the moderator density coefficient and the lower plenum mixing factor. The DNBR calculation under the assumption of $F_{{\Delta}H}$=3.66, which is used in the FSAR with all the control and the shutdown assemblies inserted except one B bank assembly and of Fz=1.55 shows that minimum DNBR reaches 1.62 at 60 second, indicating that the fuel failure is not anticipated to occur. The point kinetics equation, the lumped-parameter model and the system transient model which uses the mass and energy balance equation are verified to be effective to follow the system transient phenomena of the nuclear power plants.lear power plants.

• Applied Biological Chemistry
• /
• v.38 no.3
• /
• pp.239-247
• /
• 1995

The improvement of distribution system and freshness prolongation of crisphead lettuce were carried out through vacuum cooling and distribution under the low temperature. Lettuce that vacuum-cooled and transported by cold storage car was shown better freshness than that distributed by conventional method when they arrived at cunsuming area. And it took $10{\sim}17$ hours until their temperatures arrived at same temperatures when they were stored at $0{\sim}15^{\circ}C$ cold storage room. It was cooled to $1^{\circ}C$ after 27 minutes with vacuum cooling apparatus. The weight loss of lettuce that vacuum cooled and transported by cold storage car was below 5% after 30 days cold storage. And ascorbic acid and chlorophyll retentions were 86% and 52%, respectively. The shelf-life of crisphead lettuce, distributed by vacuum cooling and cold storage car transportation, was 5 days at $15^{\circ}C$ and over 40 days at $0^{\circ}C$, respectively. However, when it was distributed by conventional method, it was only 3 days at $15^{\circ}C$ and 20 days at $0^{\circ}C$, respectively.