• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.227-228
• /
• 2005

사용중인 OC의 사고가 외물접촉, 자연현상, 일반인 과실 등으로 인하여 전체 배전선로 일시고장의 대부분을 차지하고 있음으로, 피복의 트래킹 성능을 개선하여 수목 및 조류와의 접촉으로 인한 접촉부 전개 집중 시 또는 지지금구의 바인더부에 고전계 인가 시 트래킹에 의한 절연물의 탄화, 침식 등에 의하여 발생할 수 있는 절연파괴 등의 사고 위험을 줄이기 위하여 개발된 제품으로 산악지역 등에서 내트래킹, 내부식성, 수밀성 및 전기적인 특성이 우수하다. 본 평가기술에서는 알루미늄 묘|복강선, 연선 및 절연체의 일반적인 특성과 트래킹성, 도체수밀, 내후성, 밀착도, 교류파괴전압 등의 주요한 평가시험에 대한 방법을 검토하여 평가시험에 적용하여 평가시험시 문제점을 도출하고 평가시험방법을 정립하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.27-30
• /
• 2003

옥외 절연물은 환경에 의한 오염과 수분에 의한 젖음 현상이 항상 발생하므로 폴리머 애자의 하우징 재료의 전기방전에 대한 열화내성과 우수한 발수성의 장기간 유지특성은 제품의 장기성능에 있어서 매우 중요한 물성이다. 실리콘 고무는 내열성, 내후성, 산화안정성, 발수성 및 내오염성 동 절연소재로서 우수한 특성을 가지고 있지만 하우징 표변에서의 방전이 발생될 때 옥외절연물에서의 성능은 실리콘 고무의 배합처방에 따라서 많은 차이가 나고 있다. 본 연구에서는 내트래킹 agent인 ATH의 첨가량의 변화에 따른 재료의 특성을 조사하고, 그 특성이 실리콘 고무 폴리머 애자의 특성에 미치는 영향을 조사하였다. ATH의 첨가량에 따라서 내아크성, 내트래킹성 및 표면 발수성을 조사하였고, 폴리머 애자를 내트래킹 휠 시험 및 선행오손 후 섬락전압을 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.90-90
• /
• 2010

Cycloaliphatic Epoxy와 Bisphenol Epoxy를 각각 mol-wt%비 (80:20, 50:50, 20:80)로 혼합하고 Epoxy Silaned Silica, 바ed Silica, Spherical Silica, ATH(Aluminum Trihydrate)를 충진하여 내트래킹 특성 및 인장강도, 충격강도 등의 기계적 강도를 비교하였다. Cycloaliphatic 수지는 Huntsman사(社)의 CY5622, Bisphenol 수지는 Hexion사(社)E의 Epikote2200을 사용하였으며, Silaned Silica 및 Fused Silica는 Quatzwerke사(社)의 W12, FW12를 사용하였다. 전체 혼합물 중, 에폭시는 약 36%, 실리카는 약 34~540%, ATH는 약 10~30% 이다. 실험결과, ATH 함량이 높은 조성 및 Epoxy Silaned Silica를 사용한 조성과 Cycloaliphatic 혼합비율이 높은 조성이 우수한 내트래킹 특성을 보였다. 또한, Silica의 함량이 증가할수록 기계적 강도가 증가하였으며, Silaned Silica를 사용하였을 때 가장 우수한 특성을 나타내었다. 본 실험의 결과를 통해 옥외용 내트래킹 특성 규격인 IEC60587 4.5kV/6h를 만족하는 조성에 대해 가늠이 가능하였고, 각 조성에 따른 기계적 강도의 확인이 가능하였다.

• Journal of Korean Institute of Fire Investigation
• /
• v.10 no.1
• /
• pp.37-45
• /
• 2007

In this paper, the possibility of arc tracking, caused by combustion at the circuit breaker, was discussed. The arc tracking, occurred at the source terminals of all the circuit breakers, when we burned electric leakage circuit breakers with 220V applied. We had a same results of the experiment to simulate fire scene, in the circumstance of fire, all of the circuit breakers had arc tracking caused by combustion. Therefore we confirmed that the arc tracking at the source terminal of circuit breaker could be occurred by just combustion in the fire scene, and it was impossible to decide the cause of fire for reason of discriminating arc tracking at the terminals of circuit breaker.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.67-71
• /
• 2008

This experimental study showed the tracking characteristics of contaminated insulating materials of RCD. Electrolytes is made by IEC(International Electrotechnical Commission) 60589, NaCl added to deionized water as each 0.1 wt%. The used test equipment is application to KS(Korean Industrial Standard) C IEC 60112. The used samples is RCD(Residual Current Device) of tree companies. It is investigated carbonic electric conductive pass growth time and tracking growth form that contaminated insulators materials of RCD. As a result, carbonic electric conductive pass growth time and tracking growth form was different each companies. Track growth time of contaminated insulating materials was faster than non-contaminated.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.247-255
• /
• 2023

In order to create a virtual reality space in the metaverse, accurate tracking sensors and implementation are required. Most government agencies and corporations performs tracking to use their own tracking sensors and a base stations, such as VIVE. The VIVE method may have tracking problems due to spatial constraints and obstacles or nearby structures, and it is also that the number of people that can be accommodated within the space is also limited. In this paper, we designed and implemented metaverse using an IR sensor tracking system to freely track the spatial virtual reality metaverse, and we experimented contents in metaverse by placing IR sensors additionally on the floor and ceiling if needed in order to flexibly configure the metaverse space. As a result of the experiment, the tracking stability of the IR-tracking system was approximately 12% higher than the VIVE method. Additionally, adding more tracking sensors on the floor increases tracking stability and allows for a stable representation of virtual space.

• Fire Science and Engineering
• /
• v.23 no.2
• /
• pp.62-66
• /
• 2009

In this study, we study the damage by burning characteristics of insulating material of RCD (Residual Current Device) used in Korea. The insulating materials of RCD manufactured by three manufacturers are used as the sample. We compare and analyze the thermal decomposition characteristics, combustion characteristics and tracking characteristics of samples. The TGA and Mass Loss Calorimeter meeting the requirements for the ISO5660 (Fire tests-Reaction to Fire, part 1) are used for analyzing the thermal decomposition characteristics and combustion characteristics respectively. In addition, the tracking characteristics are analyzed according to standard of KSC IEC 60112 known as the test used for measuring the resistance tracking and comparison tracking indexes. The study results show that the resistance tracking property of insulating material provided by A Company is highest. Also, the test results show that the resistance tracking property of insulating material provided by B Company is lowest. However, the thermal stability of insulating material provided by this company is excellent at high temperature of above $350^{\circ}C$. In addition, the test results show that the thermal stability of insulating material provided by C Company is highest at temperature of below $400^{\circ}C$.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.71-77
• /
• 2016

The electrolyte of the capacitor in mobile phone chargers leaks to the power input terminal resulting in tracking on the PCB board to form a carbonized conductive path. As a result of structural analysis of the cause of the tracking, It occurred when the power input terminal and the PCB board were connected directly using the connector. The larger the amount of electrolyte leaked from the capacitor into the power input terminal, or the lower the height of the partition provided between the plug pins of the power input terminal, the higher the tracking occurrence rate. Accordingly, to lower the occurrence rate of tracking in the charger, it is necessary to provide a partition on the capacitor or increase the height of the partition provided on the power input terminal so that the leaked electrolyte does not flow to the power input terminal. In addition, the tracking occurrence rate will be reduced further if the shape of the PCB board touching ther power connection terminal is changed to ${\Pi}$.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.30-38
• /
• 2019

Tracking, which is one of the main causes of electrical fires, is perceived as a physical phenomenon of electrical discharge. Hence tracking should be explained based on electric field analysis, conduction path by electron generation, and gas discharge physics. However, few papers have considered these details. This paper proposes a tracking mechanism including their effects on tracking progress. In order to prove this mechanism, a tracking experiment, an electric field analysis for the carbonization evolution model, and an explanation of the tracking process by gas discharge physics were conducted. From the tracking experiment, the current waveforms were measured at each stage of the tracking progress from corona discharge to tracking breakdown. The electric field analysis was carried out in order to determine the electric field on the surface of a dry-band and the high electric field region for electron generation during the generation and progress of carbonization. In this paper, the proposed tracking mechanism consisted of six stages including electron avalanche by corona discharge, accumulation of positive ions, expansion of electron avalanche, secondary electron emission avalanche, streamer, and tracking by conductive path. The pulse current waveforms measured in the tracking experiment can be explained by the proposed tracking mechanism. The results of this study will be used as the technical data to detect tracking phenomenon, which is the cause of electric fire, and to improve the proof tracking index.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.1
• /
• pp.123-130
• /
• 2004

In this paper, an advanced error tracking algorithm by using feedback channel was proposed for error resilient transmission. Using this proposed algorithm, the propagation of errors were reduced within the decoded data over bit error prone network. The addresses of corrupted blocks are reported to encoder by decoder. With negative acknowledgments of feedback channel, the encoder can precisely calculate negative acknowledgments and track the propagated errors by examining the backward motion dependency for proper pixel in the current encoding frame. The error-propagation effects can be terminated completely by INTRA refreshing the affected macro-blocks by using proposed error tracking algorithm. By utilizing the selective four-corner error tracking approximation, the error tracking computations of the proposed algorithm is less than that of the algorithm using full pixel without substantial degradation in video quality. The proposed algorithm can track errors rapidly and accurately.