• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.158-161
• /
• 2001

A new type baghouse with tangential inlet and inner tube was developed and it's performances were evaluated. Experiments with variable shapes of inner tube were performed to suggest an optimum shape of inner tube which might decrease the dust loading onto bag filter surface and the amount of reentrained particles by internal gas flow. The dust loading was lower when inner tubes parallel to outer casing exist. When an inner tube covering around the lower portion of bag filters was used, the dust particles detached from the filter surface by cleaning process were reentraind by internal recirculating gas flow.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.263-264
• /
• 2000

여과포 표면상에 도달하는 입자의 농토를 낮추거나 균일하게 유지시킬 경우, 부착된 입자층 두께의 성장으로 인한 압력손실의 증가율을 줄일 수 있고 이로 인하여 탈진 주기 또한 감소시킬 수 있다. 탈진조작의 저감으로 인하여 여과포의 수명 증대로 여과포의 교체 시기를 연장시킬 수 있으므로 여과포 집진장치의 운전 및 유지 보수비의 저감을 이룰 수 있다. 본 연구에서는 집진용기의 중간부분에 위치한 접선 유입관을 통하여 오염입자를 함유한 기체유동을 유입시킨 후, 원심력과 난류확산에 의하여 집진용기 내벽과 내통(inner tube) 벽면에 부착된 입자는 중력에 의하여 용기 바닥으로 모인 후 바닥면에 설치된 스크래퍼(scraper)를 통하여 분리 처리될 수 있는 새로운 형상의 집진장치를 개발하고자 하였다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.197-197
• /
• 2017

본 연구에서는 입자성 오염물질을 다량 함유하고 있는 초기강우 유출수를 처리하기 위한 수처리 시설로 고속복합응집장치를 개발하였다. 고속응집복합장치의 요소기술은 마이크로 버블, 급속교반장치(인라인믹서), 전기촉매를 이용한 부상촉진장치, 볼텍스 흐름 등으로 구성되며, 기술 원리는 응집제에 의해 오염물질을 응결, 응집, 부상시켜 스컴을 제거하는 일반 응집 원리와 유사하다. 본 기술의 특징은 교반, 혼화조, 응집제를 1개의 조에 컴팩트하게 구성하여 체류시간을 10분 이내로 단축하였고, 볼텍스(voltex) 흐름을 이용한 선회류와 루버홀 형태의 스크린을 적용하여 응집효과를 극대화하였으며, 플럭에 의한 막힘이 없이 스크리닝이 이루어질 수 있도록 하였다. 또한, 부상촉진장치(전기유도)를 이용해 응집 플럭의 부상효과를 상승시켰고, 감속기와 일체화된 내통스크린이 선회류와 반대 방향으로 회전하면서 볼텍스 흐름의 가속효과에 의한 스크린 폐색 방지 및 응집부상 효율을 향상시킬 수 있도록 설계하였다. 부상슬러지는 별도의 플럭 제거 설비 없이 스크린 내통 회전에 이용되는 감속기에 부착된 스컴 제거기에 의해 동시 제거가 가능하며, 응집부상 처리수는 장치 가장 바깥 외곽에 충진된 필터층에서 최종 여과되어 방류되도록 구성함으로서 모든 처리공정이 단일 장치 내에서 이루어지도록 구성하였다. 본 고속복합응집장치는 전체 규격 ￠ $1000{\times}2,000mmH$의 시제품이 제작되어 현재 시흥소재 매화저수지에서 성능평가를 실시하고 있다.

• Journal of Digital Convergence
• /
• v.13 no.11
• /
• pp.433-440
• /
• 2015

This paper was to explore the effect of the locus of control on life satisfaction and preparation for old age among middle-aged adults in the time of Convergence. This survey was conducted from September to December 2013, and 284responses were used for the analysis. The data was analyzed by descriptive statistics, Pearson Correlation and Multiple Regression. The research findings could be summarized as the followings. First, the locus of control had significantly positive effect on life satisfaction, Second, the locus of control also had significant effect on preparation for old age among middle-aged adults. Third, life satisfaction between preparation for old age had positive correlations with life satisfaction.

• Design & Manufacturing
• /
• v.6 no.2
• /
• pp.79-83
• /
• 2012

Inner part is used as an insulator in wire fuses. After injection molding, inner part has been showed flashes, filling defects and deformation. After production, operators have to cut off flashes, one by one. this process leads to continuous low productivity and loss of source materials. This study focuses on identifying the causes for flashes, filling defects, clamping force of injectors, mold adhesion, resin of liquidity and others, and on resolving those issues.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.694-702
• /
• 2013

The purpose of this study is to evaluate a de-watering filtrate treatment and the possibility of securing biological treatment capacity by changing the structure of the secondary clarifier. Accordingly, the column test was conducted to determine the effect of polymer in the de-watering filtrate on sludge sedimentation. Also, the characteristics of de-watering filtrate processing was evaluated through batch test and continuous processing operation. The results showed that sludge settling velocity increased with higher polymer concentration, and that effluent SS concentration was found to decrease. Regarding processing characteristics of de-watering filtrate, the removal efficiency of TSS and TBOD5 increased as the length of secondary clarifier was longer. Also, comparing injections into anoxic tank and secondary clarifier, de-watering filtrate by continuous infusion treatment process showed stability in both conditions. Therefore, by modifying the structure of secondary clarifier, efficient processing of de-watering filtrate is expected to be possible and processing capacity of small sewage treatment plants is considered to be improved.

• Convergence Security Journal
• /
• v.13 no.5
• /
• pp.11-18
• /
• 2013

What is national security? National security is reduced for state national security. At present, national security threats can be divided into main enemies and potential ones and main enemies are separated inside and external ones. Arnold Toynbee said, "The destruction of the state is starting not from outside but from inside". This means we must be aware of inside enemies. How much do we know of the internal enemies who are trying to divide the people and overthrow the state? This paper focuses on corresponding strategies to depend our democratic state against inside enemies who penetrate all sectors of society and fabricate rumors, incite violence, and even try to overthrow our legitimate state with the base on the lessons of past West Germany case.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.52-60
• /
• 2001

The need to control the oil content in oily bilge water discharges to meet the increasing stringent seawater pollution standards has led to the development of gravity type separators. Among the several gravitational methods, a plate type oily water separator can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is believed to be an efficient method dealing with a large amount of rich oil with high specific gravity. The purpose of this paper is to examine the efficiency of oil/water separation with the characteristics of separating plate arrangement. An experimental study was carried out to analyse an efficient treatment oil-water mixture with variation of operating parameters, including flow rates, inlet oil concentrations and the height between the plates. The experimental results show that the height between the plates has a significant effect on the separation efficiency. The best efficiency was acquired when the ration of the height between the plates the plates to distance(H/Ci) was 2 with lower inlet oil concentration and lower flow rate.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.149-160
• /
• 2012

The relative effects of individual differences in cultural orientation (individualism vs. collectivism) and locus of control (LOC: internal vs. external control beliefs) combination types on global/local processing were compared by manipulating the compound stimulus types (arrows or letters), and the stimulus-stimulus congruence. The results can be summarized as followings. First, consistent with previous research on global/local processing of the compound stimuli, reaction time (RT) for global stimuli than for local stimuli, and that in the stimulus-stimulus congruent condition than in the stimulus-stimulus incongruent condition was faster. Second, faster RT was found in the compound arrows condition than in the compound letters. Third, individual difference in LOC, rather than that in the cultural orientations, appeared to be related to global precedence effect, when the compound letters were presented. These results indicated that the individual's LOC rather than cultural orientation can increase the size of the global precedence effect, which might be involved in the stage of cognitive analysis than that of feature detection.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.123-124
• /
• 2003

6개의 화학제제를 육계의 깔짚에 첨가한 후 6주간의 사육기간 동안 육계의 생산성, 계사 내의 암모니아 발생량을 측정하여 6개의 화학제제를 대조구와 비교하였다. 본 실험은 A계사와 B계사 각각에 대조구(4케이지)와 시험구(4케이지)를 배치하였으며 대구대학교 동물사육실에서 실시하였다. 시험은 각 방에서 4반복으로 실시하였다. A계사는 화학제제 I (T$_1$)을 깔짚에 첨가하고 나머지는 대조구로 하였다. B계사에는 화학제제II(T$_2$)를 깔짚에 첨가하고 나머지는 대조구로 하였다. 대조구와 실험구는 철저히 막아서 공기가 서로 내통되지 않게 하였다. 화학제제 I (T$_1$)과 II(T$_2$)의 실험이 끝난 후 같은 방법으로 화학제제III(T3)과 IV(T4)도 실시하였으며 계속해서 화학제제V(T$_{5}$)와 Ⅵ(T$_{6}$)이 실시되었다. 총 시험기간은 2002년 10월 31일부터 익년 3월 22일까지 143일간 계속되었다. 6개의 화학제제를 각각 깔짚에 첨가하였을 때 대조구에 비교하여 육계의 생산성에는 아무런 차이가 없었다. 암모니아 가스 농도는 화학제제 I (T$_1$)과 II(T$_2$)의 경우 2주에서 6주까지 처리구와 대조구간의 차이를 나타내었다. 화학제제III(T$_3$)의 처리구는 5주 동안 암모니아 가스발생은 거의 없었으며 대조구와는 큰 차이를 나타냈다. 화학제제IV(T$_4$)와 V(T$_{5}$) 그리고 Ⅵ(T$_{6}$)에서도 처리구와 대조구간에 차이가 인정되었으나 처리IV(T$_4$)와 Ⅵ(T$_{6}$)의 경우는 처리구에서도 5주와 6주의 경우 암모니아 농도는 25 ppm이거나 그 이상을 유지하였다. 모든 처리구에서 계사내 암모니아 가스농도는 25 ppm보다 낮았으나 화학제제III(T$_3$)에서는 계사내의 암모니아 가스 발생량은 거의 0에 가까웠다. 결론적으로 6개의 처리들간의 비교는 할 수 없지만 화학제제III(T$_3$)의 경우에서 처리구는 암모니아 가스 발생량을 다른 처리구에 비교하여 가장 낮게 나타났다.