• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4489-4493
• /
• 2014

LED light driving device has problems in efficiency and heating at higher than 150W. In addition, there is inconvenience in replacing the lighting device to another when W is not the same as the previous one. In this paper, a multi-channel LED light driver, driver embedded driver circuit in a multi-channel structure with a power system in the driver-interlocking structure was designed. With the auto control converter structure with a power efficiency above 93% and power factor above 0.98, the weight of the high efficiency LED lighting-actuating device in driver-interlocking structure, a driver in self-calibrating self-optimization structure. In this paper, at below 10% THD, the existing converter contrast weight was reduced by 40% or more.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.1-8
• /
• 2002

Most of the traditional embedded web server systems have been designed for monitoring and controlling some dedicated equipments. Hence, not only they have no generality and flexibility but also they are too expensive for the lower-cost domestic equipment. To cope with these difficulty, we suggest a lower-cost ${\mu}$-embedded web server model which is suitable for monitoring and controlling the industry or house equipments by using the internet. The suggested model is based on an one-chip ${\mu}$-processor in which the ISP (In-System Programming) function and flash ROM are embedded basically to minimize the cost of H/W and S/W. Also it allows to add an new function dynamically to provide the generality and flexibility. Finally, to evaluate the feasibility of the suggested model, we have manufactured a test-board based on the ATMega103 ${\mu}$-processor and programmed the control program and tested it on the MS Explorer 5.0 environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.454-463
• /
• 2013

The smart phone has already proliferated, and the smart devices of the living appliances and vehicles embedded with communication device, sensors and connected with the smart phone have been developed. Currently it can provide simple remote controller and user interfaces, it could be envisaged that intelligent technology is converged with the smart phone, and Personal Environment Service in which the smart devices are configured automatically as reflecting personal preference, device attribute, and living environment condition would be activated in the future. In this paper PES services, system architecture, and core technology are described.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.142-144
• /
• 2008

한국전력공사(이하 한전)에서는 배전계통의 최적운영을 위하여 계통운영에 필요한 기술을 발굴하여 축적하는데 많은 노력을 기울여 왔으며, 계통운영의 핵심 툴인 배전자동화 시스템을 통하여 관련기술을 축적해오고 있다. 우리나라처럼 배전자동화 시스템을 전력회사에서 자체적으로 개발하여 활용하는 사례는 전 세계적으로 유일하며, 이를 기반으로 해외 전력시장에 배전자동화 시스템을 수출하기 위하여 활발한 활동을 지속적으로 추진되고 있다. 배전자동화 시스템을 이용하면 원격으로 현장에 있는 배전자동화기기를 감시, 제어, 조작, 정정이 가능한 기본기능이 구현가능하고, 각종 계통운영에 필요한 기술계산, 즉 전압강하계산, 보호협조검토, 표준조작지시서(SOP)의 생성, 상시개방점 위치조정으로 손실최소화, 분산전원 연계계통 기술검토의 자동처리가 가능해진다. 기술계산프로그램은 최초 개발 당시인 2002년에는 배전자동화시스템 주장치가 설치된 장소인 온라인 상태에서만 사용이 가능하여 사용상 제약을 가지고 있었으나, 이를 개선하고자 2006년 10월 배전자동화기반 오프라인형 기술계산프로그램을 개발하였고 이를 지속적으로 업그레이드를 추진하여 활용해오고 있다. 배전자동화기반 오프라인형 기술계산프로그램은 배전자동화주장치에서 데이터를 추출하여 배전자동화주장치가 아닌 일반PC나 노트북에서도 배전자동화시스템에 내장된 배전계통 정보 즉, 선로길이 및 전력선 제원 등을 직접 이용하므로 각종 기술계산을 신속하고 정확하게 수행하는 것이 가능하게 되었다. 따라서 이를 지속적으로 활용하고 성능개선을 추진하여 배전계통 운영시 신뢰도 제고에 크게 기여할 것으로 기대되고 있다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.304-305
• /
• 2011

정보화 사회로 진입함에 따라 전자화 된 정보의 저장 및 관리는 매우 중요한 사안으로 부각되고 있으며 모든 통신기기 및 전산시스템은 365일 가동이 보장되어야 하므로 여러 대의 전원을 병렬 운전하여 신뢰성을 높이고 용량을 증대시키는 방안이 연구되고 있다. 특히, 신뢰성이 요구되는 분야에서는 리던던시(Redundancy) 개념이 중요하게 되어 병렬 운전의 도입이 확산 되고 있다. 현재 새로운 전력 구조는 절연된 컨버터의 평균 전력량을 다운시켜 다수의 전력변환기를 병렬운전 시키는 방향으로 변하고 있으며, 이는 전력변환기의 신뢰성을 증가시키고 예비기기에 대한 부담을 감소시키는 큰 장점을 갖고 있다. 최근에는 이더넷 라이터를 이용하여 부하분담(Load Sharing) 및 핫스왑(Hot-swap)기능을 DC/DC 컨버터에 내장하고 있는 추세이다. 본 연구에서는 7[kW]급 지능형 DC 모듈전원 제어기술 개발에 초점을 두고 최적의 부하분담을 갖는 고성능 전류 제어 알고리즘을 소개하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.156-163
• /
• 2006

The purpose of this study is to improve the machining of free-formed NURBS surfaces using newly defined G-codes which can directly deal with shapes defined from CAD/CAM programs on a surface basis and specialize in rough and finish cut. To this purpose, a NURBS surface interpolation system is proposed in this paper. The proposed interpolation system includes online tool-path planning, real-time interpolation and feedrate regulation considering an effective machining method and minimum machining time all suitable for unit NURBS surface machining. The corresponding algorithms are simultaneously executed in an online manner. The proposed NURBS surface interpolation system is integrated and implemented with a PC-based 3-axis CNC milling system. A graphic user interface (GUI) and a 3D tool-path viewer which interprets the G-codes for NURBS surfaces and displays whole tool-paths are also developed and included in our real-time control system. The proposed system is evaluated through actual machining in terms of size of NC data, machining time, regulation of feedrate and cutting force focused on finish cut in comparison with the existing method.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.75-86
• /
• 2013

This paper presents a technique to implement embedded systems using interrupts of the one-chip microcontroller with many peripherals based on a multiple finite state machines model. The multiple finite state machine model utilizes the structure of FSMD used for hardware design and the features of flow control by interrupts. The main finite state machine corresponds to the main program and the sub-state machines corresponds to the interrupt subroutines. Therefore, interrupts from the peripherals can be processed immediately in the sub-state machines. The request and reply variables are used to interface between the finite state machines. Additional operating system is not necessary for the context switching between the main state machine and the sub-state machine, because the flow-control caused by interrupt can be replaced with the switching. An embedded system modeled on multiple finite state machine with ASM charts can be easily implemented by the conversion of ASM charts into C-language programs. This implementation technique can be easily adopted to the hardware oriented embedded systems because of the detail description of the model and the fast response to the interrupt events in the sub-state machine.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.619-625
• /
• 2023

In this paper, the remote care of medical beds with multiple body pressure sensors is described. Falling is one of the factors that seriously threaten the safety of patients and harm their health. In this study, a new bed was developed to overcome this. The bed system consists of a keyboard that can operate, a keyboard controller that manages the movement of the keyboard, a sensor that measures body pressure, a sensor controller that transmits and receives sensor values, a main controller that checks it and operates automatically or manually according to the algorithm, and a server that oversees all these information. The bed system checks the patient's location through a sensor and wirelessly alerts the server through the main controller when the patient determines that there is a risk of falling, so that the nurse or nurse can recognize the patient's dangerous condition. The server may receive state data transmitted from the wired/wireless terminal to monitor whether the bed system is operating normally. The controller of the keyboard operates a keyboard-type mechanism and automatically controls the prevention of bedsores connected by body pressure sensors to physically separate the area to which the patient's pressure is applied to prevent bedsores. The main controller checks the presence of the patient's bed and transmits it to the server. In conclusion, the proposed system can smart monitor the user's state and perform remote care.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.93-100
• /
• 2018

The electronic acupuncture has the advantage of treating the patient with acupuncture by simultaneously analyzing the patient's physical condition and treatment condition. In this paper, it is proposed and developed an electronic acupuncture algorithm embedded in a multi pad. Especially, it is implemented the control algorithm using the optimal electronic dipstick calculation, sensing pad and DSP system for the patient's body condition. Moreover, in this paper, it is developed SW and HW prototypes that can receive personal information by patient and can receive multi-array type electronc needle guiding procedure based on WEB.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.663-668
• /
• 2022

As the number of people who experience sleep disorders is increasily growing, users' desire to improve their sleep quality has also increased. Acoordingly, the 'Sleeptech' market is showing a steady growth. This study designs and proposes a system after consideration of existing related research that can help modern people overcome sleep disorders, which is based on the necessity for customized sleep hygien service. This system analyzes user's sleep data collected through smartphone built-in sensors to calculate sleep patterns, provides customized sleep hygiene-based solutions to users through collaborative filtering, and provides an environment suitable for sleep through the automatic control of IoT devices. This method of using sleep data is expected to contribute to the improvement of the quality of life of modern people suffering from sleep disorders, which results from expansion to Sleeptech market as well as improvement of users' sleep habits.