• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.113-114
• /
• 2003

도시지역 하층대기의 오존 연직분포는 지표부근의 NOx배출의 영향과 대기경계층의 일변화 및 구조적 특성에 의해 시·공간적으로 큰 변화를 나타낸다. 일반적으로 야간에는 역전층 내의 건성침적과 NOx 적정작용에 의해 오존농도가 감소하며, 하층 안정층과 분리되어 있는 잔류층(residual layer)의 오존농도와 큰 차이를 보이게 된다. 아울러 일출 후 안정층 파괴와 혼합고 성장에 의해 지표부근의 오존농도가 증가하고 연직적으로 비교적 일정한 오존분포가 나타난다(Zang et al., 1998; Berkowitz et al., 2000). (중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.61-68
• /
• 2019

As the pollution of water resources deteriorates due to industrialization and urbanization, it is difficult to supply clean water through a water treatment method using chlorine. Therefore, the introduction of advanced water treatment facilities using ozone is on the increase. However, epoxy which is used as waterproofing and anticorrosives and stainless steel used in conventional waterproofing and anti-corrosive methods have deteriorated because of the strong oxidizing power of ozone, causing problems such as leaking. Moreover, it even causes the durability degradation of a concrete. Therefore, in this study, metal spraying system was used as the means of constructing a metal panel with excellent ozone resistance and chemical resistance which is an easier method than an existing construction method. Ozone resistance was evaluated in accordance with the type of metal sprayed coatings to develop a finishing method which can prevent the concrete structure of water treatment facilities from deterioration. Furthermore, electrochemical stability in actual sewage treatment plant environment was evaluated. Experimental results showed that Ti has superior ozone resistance after spraying and the electrochemical stability in the sewage treatment plant environment showed that Ti has the highest polarization resistance of $403.83k{\cdot}{\Omega}{\cdot}cm^2$, which ensures high levels of durability.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.306-313
• /
• 2001

The objectives of this study were to understand the physiological responses and resistance of red pine trees to ozone exposure in relation to nitrogen and phosphorus fertilization. Potted one-year-old seedlings of Pinus densiflora S. et Z. were exposed in an open-top chamber(OTC) to ozone at concentration of 0.12ppm for 3 hours daily for eight weeks with or without N and P fertilization alone or in combination. The OTC had dimensions of 2.0m in height and 2.5m in diameter, and the air in a control chamber was filtered with activated charcoal to maintain the ozone concentration below 0.02ppm. After eight weeks of ozone exposure, none of the seedlings showed any symptoms of visible injury on leaves. The seedlings fertilized with N and P in a control chamber showed 22 to 95% increase in total dry weight, and similar fertilizer effect was also noticed in an ozone chamber. Ozone treatment did not decrease the total dry weight, but increased shoot/root ratio by 14.5%. Ozone treatment increased sucrose content in the leaves by 23%, but decreased sucrose content in roots by 20% regardless of N or P application. Starch content in the leaves was not affected by either ozone or fertilizer. However, starch content in the roots was decreased by 41% by ozone treatment. Chlorophyll content in the leaves was increased by 70% by N application, but was not affected by ozone treatment. Nitrogen and P fertilization stimulated net photosynthesis by 80% in a control chamber, but stimulatory effect of N and P on net photosynthesis was 22.3% less in an ozone chamber. Net photosynthesis of the seedlings with no fertilization was not affected by ozone treatment. Based on the observed interactions between N, P, and ozone, it was concluded that the stimulatory effect of fertilization on growth of Pinus densiflora would be decreased by ozone treatment, but fertilization would increase resistance to ozone by re-allocation of increased carbohydrates.

• Elastomers and Composites
• /
• v.43 no.1
• /
• pp.8-17
• /
• 2008

Styrene-butadiene rubber(SBR) has good abrasion resistance, miscibility, and anti-vibration property. however, it is easily damaged by ozone and swelled by hydrocarbon fluids because of unsaturation part in main chain, that causes loss of visco-elasticity and reduction of product's life cycle. Therefore, object of this study is to cope with this problem. SBR is blended with various proportion of ethylene-propylene-diene terpolymer(EPDM), which has excellent ozone and oxygen resistance, to improve physical properties and ozone resistance, and diverse analytical techniques are used to measure morphology, glass transition temperature$(T_g)$, ozone-resistance, degradation temperature, static spring constant, hardness for considering a suitability for anti-vibration industrial product. We found that the blend consisting of SBR 70% and EPDM 30% showed no crack after ozone test and good miscibility between SBR and EPDM from this study.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.31-33
• /
• 2007

본 연구에서 개발한 단기측정용(1시간) 오존 간이측정기는 $40ppm{\ast}min$(1시간 환경기준 농도(0.15ppm)에 266분(약 4.4시간) 노출되는 경우)까지 선형 변화를 나타내었으며 그 이상에서는 비선형적으로 변화하였다. 본 연구에서 개발한 단기측정용 오존 간이측정기의 현장 적용을 위해서는 현장측정에 대한 검증이 필요하며 기준성 오염물외 다른 오염물질과 실외 기상현상(예; 풍향, 풍속, 온도 등)의 영향 검토에 대한 이후의 연구가 필요하며 간이측정기의 장기간 보관을 위한 저장법에 대한 장래 연구가 필요하다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.267-270
• /
• 2007

오존무 분사장치는 흡입구와 내에 소정의 공간이 형성된 케이스와 자동 손잡이와 $360^{\circ}$회전이 가능해 운반 및 이동이 간편한 케이스, 상기 케이스의 내부 소정 부위에 공기 흡입구로 흡입되는 공기 중에 포함된 먼지 및 습기를 제거하는 제습 장치와, 원료가스인 공기를 일정하게 제공하는 송풍기, 강력한 살균 소독기능을 지닌 오존발생기, 오존을 발생시키기 위한 고주파 펄스 전원장치, 입자경이 $3{\sim}40{\mu}m$이하의 이류체 미세 분사형 노즐, 살수통(물을 담는 용기) 및 기능 조절부(펄스전원제어, 타이머 조절, 송풍기 제어, 이류체 미세 분사형 노즐스위치 제어)로 성되어 작동하는 것으로 일반적인 가습기와는 다르다. 그리고 강력한 살균, 소독, 탈취 및 대기의 정화 기능이 있는 오존을 이용하는 동시에 기존의 방식보다 간단한 구조의 분무발생 수단을 구비함으로써 전체적으로 구성을 간단하게 하면서 대기 정화 효율을 향상시키는 장점이 있다.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.175-180
• /
• 2016

The fluorine-containing modified polyurea was synthesized using the PTPE-diol to improve the ozone-resistance. Three types (PFDIA-10C, PFDIA-20C, PFDIA-30C) of the modified polyurea containing the fluorine content from 10 wt% to 30 wt% were prepared. After ozone treatment on the prepared films, the weight loss of film was investigated and analyzed the film properties such as hardness, wear resistance, tensile stress, elongation, etc. Also, the film surfaces were observed by the optical microscopy after ozone-resistance tests at 10 ppm for 336 h. It was shown that the defects such as the cracking, the bleaching and the mass loss were reduced and the ozone-resistance of films were improved when the contents of PFPE-diol are more than 20 wt%. It was found that the intensity of O-H peak in PFDIA compounds confirmed by FT-IR was decreased as fluorine contents were increasing.

• Elastomers and Composites
• /
• v.43 no.2
• /
• pp.104-112
• /
• 2008

The ethylene propylene diene terpolymer (EPDM) blends with styrene butadiene rubber (SBR) were prepared from an open 2-roll mill following the conventional rubber blend method, and then cure characteristics, mechanical properties and ozone resistance were subsequently examined. With incorporation of SBR the torque value of the EPDM and SBR blends showed a gradual increase in the cure curve. The maximum torque value was obtained with lowest level at 25wt% of SBR and it was increased linearly with more than 25wt%. As the SBR loading increased scorch time and optimum cure time decreased. Hardness represented a maximum at 50wt% of SBR. However upper and lower than that value it decreased. It was found that the unfavorable characteristics of ozone resistance of pure SBR was significantly improved through the blending of SBR with EPDM.

• The tire
• /
• s.5
• /
• pp.51-54
• /
• 1967

• Fire Protection Technology
• /
• s.9
• /
• pp.52-55
• /
• 1990