• The Korean Journal of Zoology
• /
• v.31 no.2
• /
• pp.122-132
• /
• 1988

Ultrastructure of the cutaneous granular glands and production of their secretory granules in the water toad, Bufo steinegeri Schmidt, are studied with light and electron microscopes. Cutaneous granular glands of the water toad have gland cavity in dermis and gland duct in epidermis. Each gland cavity of the granular glands is consisted of 3 types of cells which are inner glandular epithelial cells, outermost myoepithelial cells and another kind of epithelial cells near the gland duct. Characteristically, cytoplasms of the glandular epitelial cells appeared multinucleated masses without differentiation into cells. Poisonous secretory graules excreated by the merocrine secretion are basicafly composed of 2 kinds of granules which are electron dense granules and electron lucent granules. These granules are fused each other and forming compounded structures. According to the granular size and differentiated levels, they are subdivided into 4 types of granules. Synthesis of these secretory granules is occurred at the smooth endoplasmic reticulums of the glandular epithelial cells and limiting membranes of these granules are also originated from these cell organelles.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.377-385
• /
• 2003

Flexural characteristics of the R.C beams strengthened with newly-developed grid-type carbon fiber plastics(CFRP-GRIDS) were investigated. The tests were conducted under the four-points load to the failure to investigate the strengthening effects of CFRP-GRIDS on the beams. Results showed that initial cracks appeared in the boundary layers of fibers embedded in the newly-placed mortar concrete slowly progressed to the direction of supports and showed fracture of fiber plastics and brittle failure of concrete in compression in sequence after the yielding of steel reinforcement. Accordingly, the appropriate area of Grid-type carbon-fiber plastics in the strengthening design of deteriorated RC structures should be limited and given based on the ultimate strength design method to avoid the brittle failure of concrete structures.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1305-1311
• /
• 2016

The smart factory, a combination of ICT technology to the entire production process of a product, means can you intelligent factory is to achieve such reduction and process improvement of the production cost. To implement the smart factory, inevitably must have an internal equipment connections to the external network, this is by equipment which is operated by the existing closure network is exposed to the outside network, the security vulnerability so that gender is increased. In order to solve this problem, it is possible to apply security solutions that are used in normal environments. However, it is impossible to have just completely blocking security threats that can occur in a smart factory network. Further, considering the economic damage that can occur during security breach accident, which cannot be not a serious problem. Therefore, in this paper, a look to know the security measures that can be applied to smart factory, to introduce the main fusion security technology necessary to smart factory dedicated security gateway.

• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.56-62
• /
• 2010

The purpose of this paper analyzes and investigates the failure case studies of electronic control sensors for a LP gas engine. The malfunction of crank angle sensor, which controls a fuel injection volume of LP gas, displays an irregular and non-uniform pulse wave form. The pulse form, which is related to the noise of the crank angle sensor, displays at the rectangular peak with a saw-toothed shape and is intermittently generated with a level of 2.46V noise signal. The malfunction of No. 1 TDC sensor in which is caused from the internal disorder affects to the reduction of engine power and engine stop suddenly. If the malfunction of oxygen sensor is occurred due to a wiring problem of a sensor connector, the LP gas vehicle may produce a shaking and disharmony of an engine because of no signal supply from the oxygen sensor. The air cleaner replica produces the clogging of continuous supply of fresh air. This may cause the retardation of vehicle acceleration and engine disharmony intermittently.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.262-267
• /
• 2006

For growing need for the multimedia application in the vehicles, the MOST protocol has been focused on. The MOST protocol supports three kinds of communication modes; short control message, asynchronous packets, and reserved synchronous stream data. Because of a variety of transportation, the MOST is suitable for various applications in vehicle environment. In this paper, we implemented embedded system which is MOST-enabled AMS platform and tested the network communication operation through the control port and the synchronous channel of the source port. We implemented the prototype platforms which communicate each other on the MOST's POF network. Moreover we implemented the DivX decoder attached AMS platform and verified the operation by transferring the video stream and the control messages through the MOST network.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.465-465
• /
• 2016

관거시설은 관거, 맨홀(manhole), 우수토실, 물받이, 연결관, 침투시설, 저류시설, 펌프장 등을 포함하는 시설들로 구성되어 있다. 여기서 맨홀은 배수시설의 유지와 관리를 위하여 일정거리마다 설치되고 있으며, 관거의 기점, 방향, 경사 및 관경이 변하는 곳, 단차가 발생하는 곳, 관거가 합류하는 곳에는 반드시 설치한다(환경부, 2011). 그러나 하수도시설기준(환경부, 2011)에서 합류맨홀의 설치에 관한 사항은 T형 합류맨홀에 관한 개략적인 표만 제시되어 있을 뿐, 4방향 합류맨홀에 대한 구체적인 설치 기준이 제시되어 있지 않은 실정이다. 또한 에너지 손실의 저감 및 배수능력을 증대시키기 위하여 맨홀내 설치되는 인버트는 미국의 형태 및 기준을 그대로 적용하고 있으므로 관거시설의 시설의 합리적인 설계기준을 제시하기 위하여 인버트가 설치된 4방향 합류맨홀에서의 흐름특성 및 수두 손실을 분석할 필요가 있다. 본 연구에서는 인버트가 설치된 4방향 합류맨홀 손실계수 산정 및 흐름특성을 분석하기 위하여 문헌조사 및 현장조사를 실시하여 수리실험 장치를 제작하였다. 실험에 사용된 맨홀은 하수도시설기준(환경부, 2011)의 표준 1호 맨홀을 1/5로 축소하였고, 인버트는 설치되지 않은 조건(CASE A), 반원형 인버트(CASE B), U형 인버트(CASE C)를 각각 실험하였으며, 실험유량으로 총 유출량 (Qout)은 $2{\sim}5{\ell}/sec$, 총 유출량에 대한 측면 유입량($Q_{Lat}$)의 비($Q_{Lat}/Q_{out}$)는 0~1 조건으로 변화시키면서 흐름특성 및 손실계수를 산정하였다. 실험결과 측면유량비가 증가함에 따라 CASE B와 CASE C는 CASE A보다 맨홀 내 수심이 약 3~7%정도 증가되는 경향을 나타내고 있었으며, 측면유량비의 증가에 따른 손실계수 산정 결과, CASE B는 CASE A 보다 약 30%정도 손실계수가 증가하였으며, CASE C는 CASE A보다 약 35%정도 손실계수가 증가하는 것으로 나타났다. 이는 기존에 사용되고 있는 인버트의 형상이 4방향 합류맨홀에서의 손실 저감 및 배수능력을 증대시키기 보다는 오히려 맨홀 내 통수능력을 저하시켜 4방향 합류맨홀에서의 배수능력을 저감시키는 것으로 분석되었다. 그러므로 기 사용되는 인버트의 개선이 필요하며 관거시설의 배수능력을 증대하기 위하여 지속적인 연구를 통한 개선된 인버트의 형상 제시가 필요할 것으로 판단된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1531-1537
• /
• 2018

In maritime logistics, a large number of containers are transported to the destination through a port in the form of composite transportation such as ships, trucks, and railways. Logistics parties such as shipping companies and consignors prefer having the real-time information on the entry and exit of the logistics hubs of the freight. Particularly, a port is an important space that connects the maritime and inland areas. Hence, the interest about freight of the logistics party in port is high. This study describes tracking the location of freight by using GPS dynamically based on area type rather than point type. This presents dynamic information of location tracking when the freight enters, exits from, and passes through a certain port area. I suggest a real-time location of the container cargos tracking algorithm in port-entry, port-exit, and port inside using Active IP-RFID technology based on the location tracking algorithm of previous research.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2019

An extremely small size multi-loop phase-locked loop(PLL) keeping phase noise performances has been proposed. It has been designed to have the loop filter made of small single capacitor with multiple Frequency Voltage Converters (FVCs) because the main goal is to make the size of the proposed PLL extremely small. Multiple FVCs which are connected to voltage controlled oscillator(VCO) make multiple negative feedback loops in PLL. Those multiple negative feedback loops enable the PLL with the loop filter made of an extremely small size single capacitor operate stably. It has been designed with a 1.8V $0.18{\mu}m$ CMOS process. The simulation results show that the proposed PLL has the 1.6ps jitter and $10{\mu}s$ locking time.

• Journal of Internet Computing and Services
• /
• v.20 no.5
• /
• pp.9-18
• /
• 2019

Android Application Package (APK) is vulnerable to repackaging attacks. Therefore, obfuscation technology was applied inside the Android APK file to cope with repackaging attack. However, as more advanced reverse engineering techniques continue to be developed, fake Android APK files to be released. A new approach is needed to solve this problem. A blockchain is a continuously growing list of records, called blocks, which are linked and secured using cryptography. Each block typically contains a cryptographic hash of theprevious block, a timestamp and transaction data. Once recorded, the data inany given block cannot be altered retroactively without the alteration of all subsequent blocks. Therefore, it is possible to check whether or not theAndroid Mobile APK is forged by applying the blockchain technology. In this paper, we construct a discrimination DApp (Decentralized Application) against forgery Android Mobile APK by recording and maintaining the legitimate APK in the consortium blockchain framework like Hyperledger Fabric by Composer. With proposed DApp, we can prevent the forgery and modification of the appfrom being installed on the user's Smartphone, and normal and legitimate apps will be widely used.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.2
• /
• pp.83-92
• /
• 2007

In connectionless packet network, if a sender encrypts packets by block chaining mode and send it to receiver, the receiver should decrypt packets in encrypted order that is not received order. Therefore, the performance and efficiency are lowered for crypto communication system. To solve this problem, we propose packet encryption scheme for connectionless packet network that can decrypt the packets independently, even if the received order of packets are changed or packets are missed. The scheme makes new IV(Initial Vector) using IV that created by key exchange process and salt that made by random number. We propose extended Cryptoki API that added packet encryption/decryption functions and mechanism for improving convenience and performance. We implement the scheme and get result that the performance increased about $1.5{\sim}l5.6$ times compare with in case of implementing using Cryptoki API in the test environment.