• Title/Summary/Keyword: 내부공기순환

Search Result 79, Processing Time 0.031 seconds

블라인드 장착에 따른 실내 공기 순환 연구

  • Nam, Do-U;Hwang, Jae-Min
    • Proceeding of EDISON Challenge
    • /
    • 2016.03a
    • /
    • pp.625-627
    • /
    • 2016
  • 본 논문은 EDISON CFD의 전처리기, eMEGA를 이용하여 격자를 생성하고, 2차원 정렬 격자 기반 비압축성 해석자를 이용하여 유동해석을 진행한 뒤 후처리기, eDAVA를 통해 유동선을 그려 블라인드 장착에 따른 실내 공기 순환에 대한 연구 내용을 담고 있다. 본 연구는 시중에 판매중인 사생활 보호용 블라인드를 포함, 여러 블라인드의 장착 여부에 따라 실내 내부 공기 순환의 양상을 확인하고 실제로 블라인드 장착 시 실내환기에 어떤 영향을 주는지 유동 선을 통해 확인해 보았다. 블라인드 미장착시, 실내 전체적으로 공기가 고루 순환되는 모습을 보였으며, 블라인드 장착 시 대체로 블라인드 형태에 따라 유동이 이동하는 것을 볼 수 있었다. 본 연구는 사생활 보호와 환기 효율성의 관점에서의 소비자 선택권에 영향을 미치는 효과를 가져 올 것으로 보인다.

  • PDF

Thermal Storage Performance of Underground Rock Storage System for Heating of Greenhouse (자갈축열 태양열 온실의 축열성능)

  • 이석건;이종원;이현우;김길동
    • Proceedings of the Korean Society for Bio-Environment Control Conference
    • /
    • 2001.04b
    • /
    • pp.86-87
    • /
    • 2001
  • 자갈축열 태양열온실의 기본원리는 주간에 일사로 데워진 온실내부공기를 자갈축열층사이로 순환시켜 이때 자갈층에 축열된 에너지를 난방에 이용하는 것이므로 축열층 사이로 충분한 공기순환이 이루어져야 한다. 따라서, 자갈축열층내로 순환되는 공기의 풍량이 축열성능과 밀접한 관계가 있으며 효과적인 공기 순환방식을 분석하고자 자갈축열성능실험을 수행하였다. (중략)

  • PDF

내부순환유동층 반응기에서 수증기를 이용한 석탄가스화 연구

  • 전석구;이운재;김상돈
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1993.11a
    • /
    • pp.42-45
    • /
    • 1993
  • 내경 0.1 m 의 draft tube 를 갖는 직경 0.3 m, 높이 2.7 m 인 내부순환유동층 가스화반응기에서 호주산 준 역청탄을 공기와 수증기를 사용하여 가스화 하였다. draft tube에 공기를 주입하여 연소반응, annulus 구역에 수증기를 주입하여 가스화하여 연소반응에서 생성된 열을 annulus 에 공급하였다. 반응기온도와 석탄주입량에 따라 H$_2$, CO 및 발열량이 증가하였으나 공기의 유량증가에 따른 H$_2$, CO는 감소하고 $CO_2$ 는 증가하였으며 발열량은 감소하였다.

  • PDF

Analysis of Air Flow for Improving the Heat Storage Efficiency of the Solar-heated Greenhouse with Rock Bed Storage (자갈축열온실의 축열성능 향상을 위한 공기유동 분석)

  • 이석건;이종원;이현우
    • Proceedings of the Korean Society for Bio-Environment Control Conference
    • /
    • 2003.04a
    • /
    • pp.195-198
    • /
    • 2003
  • 자갈축열 태양열온실은 주간에 일사로 데워진 온실 내부공기를 온실하부에 설치된 자갈축열층사이로 강제순환시켜 자갈에 에너지를 축열한다. 이러한 축열과 방열과정을 통하여 겨울철 야간에 난방시스템으로 이용하고, 여름철에는 냉방효과를 꾀하게 된다. 온실내 공기가 축열층을 통과하는 동안의 열전달은 강제대류열전달이며, 이 경우 축열층내의 열이동은 축열층내 공기와 자갈표면온도가 초기에는 열적으로 평형상태로 존재하다가 순환공기의 온도상승에 따라 열전달이 일어나게 된다. (중략)

  • PDF

Mixing effect of aeration in thermally stratified water (물순환장치 가동에 따른 온도 성층화 혼합 효과)

  • Choi, Seongeun;Hwang, Jin Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.61-61
    • /
    • 2021
  • 온도 성층화는 많은 저수지와 댐에서 흔히 발생하는 현상으로 호수나 저수지의 표면 온도가 바닥보다 상대적으로 높아 깊이에 따른 열 구배를 나타낸다. 이러한 온도 성층화 현상은 여름철과 같이 상부와 하부의 온도 차가 클수록 안정적이게 나타나며 이러한 층화 현상으로 수직 확산이 제어되어 수질에 영향을 미친다고 알려져 있다. 따라서 댐이나 호수 등 층화 현상이 심한 유체 내부 바닥에 물순환장치를 설치하여 외부로부터 공기를 끌어와 하부에서 공기를 분출하여 온도 성층을 약화시키기도 한다. 물순환 장치를 설비하면 수체의 혼합이 용이해지며 물질전달이 개선되어 수질이 향상된다. 국내의 경우 대청댐, 보령댐, 영주 댐 등 많은 국내 댐 내부에 물순환장치가 설비되어있다. 본 연구에서 댐의 물순환장치의 성능을 파악하기 위해 산기식 물순환 장비가 설치되어있는 영주댐을 연구 대상 지역으로 잡았다. 연구지역의 계절별 성층구조 및 특성을 조사하기 위해, 봄, 여름, 가을 영주댐에 방문하여 관측 자료를 취득하였으며 물순환 장치는 봄철의 경우만 가동하였다. 봄철의 물순환 장치 가동 전후 관측 데이터를 바탕으로 수치모형실험을 실행하여 관측 결과와 비교 및 검증하였다. 이를 바탕으로 여름, 가을에 물순환장치를 가동하였을 경우 댐 내부 수체의 혼합과정을 살펴보는 연구를 진행하였다. 본 연구는 CFD (Computational Fluid Dynamic) 시뮬레이션을 수행하기 위해 오픈 소스 소프트웨어 OpenFOAM(version 4.0)에서 열 전달이 포함되어있는 비압축성 VOF 솔버를 사용하였다. 본 솔버는 물과 공기를 동시에 나타낼 수 있으며 온도의 확산 방정식을 포함하고 있다. 또한 유동해석 수행 시 사용한 물순환장치의 효울은 실제 장치의 효율과 동일하다. 본 연구의 목표는 다음과 같다. (1) 관측만으로 파악하기 어려운 수체의 혼합거동을 유동해석 자료를 통해 면밀히 살펴보고 (2) 봄철 물순환 장치가 작동하기 전후 자료를 바탕으로 여름 및 가을철 물순환장치 가동 전후 데이터를 유동해석 자료로 취득한다. (3) 또한 물순환장치 가동 전후 데이터를 통해 계절별 혼합 효율을 취득한다.

  • PDF

A Study of Cold Flow Characteristics of a Flue Gas Recirculation Burner using Coanda Nozzles (코안다 노즐을 이용한 배기가스 재순환 버너의 냉간 유동 특성에 관한 연구)

  • Ha, Ji Soo;Park, Chan Hyuk;Shim, Sung Hun;Jung, Sang Hyun
    • Journal of Energy Engineering
    • /
    • v.25 no.4
    • /
    • pp.152-158
    • /
    • 2016
  • Nitrogen oxide is generated by the chemical reaction of oxygen and nitrogen in higher temperature environment of combustion facilities. The NOx reduction equipment is generally used in the power plant or incineration plant and it causes enormous cost for the construction and maintenance. The flue gas recirculation method is commonly adopted for the reduction of NOx formation in the combustion facilities. In the present study, the computational fluid dynamic analysis was accomplished to elucidated the cold flow characteristics in the flue gas recirculation burner with coanda nozzles in the flue gas recirculation pipe. The inlet and outlet of flue gas recirculation pipes are directed toward the tangential direction of circular burner not toward the center of burner. The swirling flow is formed in the burner and it causes the reverse flow in the burner. The ratio of flue gas recirculation flow rate with the air flow rate was about 2.5 for the case with the coanda nozzle gap, 0.5mm and it was 1.5 for the case with the gap, 1.0mm. With the same coanda nozzle gap, the flue gas recirculation flow rate ratio had a little increase when the air flow rate changes from 1.1 to 2.2 times of ideal air flow rate.

A Model for Liquid Circulation Velocity in Airlift Reactors (공기부양반응기 내에서의 액체순환속도를 위한 모델)

  • Keun Ho Choi
    • Korean Chemical Engineering Research
    • /
    • v.61 no.3
    • /
    • pp.446-455
    • /
    • 2023
  • A mathematical model for predicting the liquid circulation velocity in an airlift reactor was developed based on the mechanical energy balance of the fluid circulation loop. The model considered the energy loss due to a 90° turn, the energy loss due to friction, and the energy loss due to the change in cross-sectional area at each part of the reactor. The model that separately considered the loss coefficients related to friction, direction change, and cross-sectional area change was able to predict the liquid circulation velocity better than the previous model using lumped parameters. The liquid circulation velocity was measured by the tracer pulse method. Most of our experimental results obtained in external-loop airlift reactors, which had the top and bottom connecting pipes, as well as other investigators' results obtained in various types of airlift reactors, were well predicted by the developed model with an error within 20%. Useful empirical equations for the loss coefficient related to the 90° turn of the circulating fluid were obtained in external and internal-loop airlift reactors and used to predict the liquid circulation velocity.

The Performance Analysis of a Return Air Bypass Air Conditioning System by a Simulator Experiment (실물실험에 의한 순환공기 바이패스 공조시스템의 성능분석)

  • 신현준;김보철;김정엽
    • Journal of Energy Engineering
    • /
    • v.11 no.2
    • /
    • pp.130-135
    • /
    • 2002
  • Bypass air conditioning systems are divided into three types; outdoor air bypass, mixed air bypass and return air bypass system. Among bypass air conditioning systems, a return air bypass system is more effective than other two systems because it doesn't induce unconditioned outdoor air into conditioned room. The numerical study on the bypass air conditioning system shows this system can maintain indoor RH(Relative Humidity) less than a conventional CAV (Constant Air Volume) air conditioning system by adjusting face and bypass dampers at part load. A simulator was built to compare results of a numerical experiment and those of a simulator experiment. The results of the simulator experiment was nearly same as those of the numerical experiment; when a design sensible load (the ratio of sensible load to total sensible load) was 70 percent (at this time, RSHF=0.7), indoor relative humidity (in case of both numerical experiments and simulator experiments) was maintained below 60% specified by ASHRAE STANDARD 62-1999. The bypass air conditioning system is expected to be applied to many buildings where the Percentage of latent loads or air change tate is high.

Performance Improvement of an Air Source Heat Pump by Storage of Surplus Solar Energy in Greenhouse (온실 내 잉여 태양열을 이용한 공기열원 히트펌프 성능향상)

  • Kwon, Jin Kyung;Kang, Geum Chun;Moon, Jong Pil;Kang, Youn Ku;Kim, Chung Kil;Lee, Su Jang
    • Journal of Bio-Environment Control
    • /
    • v.22 no.4
    • /
    • pp.328-334
    • /
    • 2013
  • A greenhouse heating system to improve heat pump performance using inside and outside air of greenhouse as a heat source selectively and cut $CO_2$ enrichment costs by delay of greenhouse ventilation was developed. In this system, thermal storage modes divided into inside circulation mode using surplus solar energy and outside circulation mode using outside air heat. The thermal storage modes were designed to be switched mutually according to inside greenhouse temperature and six temperature values were input to control the heat pump operating, thermal storage mode switching and greenhouse heating automatically. Operating characteristics of this system were tested in a plastic greenhouse of non-ventilation condition. The results of test showed that the inside circulation mode began at about 11:00 and lasted for about 210 minutes and inside greenhouse temperature was maintained between $20{\sim}28^{\circ}C$ in spite of non-ventilation. System heating COP of the inside circulation mode in the daytime was 3.35, which was 36% and 25% higher than that of the outside circulation modes in the nighttime and daytime respectively.

Analysis of Aldehydes in the Public Transportation Facilities (대중교통 수단 및 교통시설 내부에서의 알데하이드 오염도 분석)

  • 이병규;유주희
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2002.11a
    • /
    • pp.290-291
    • /
    • 2002
  • 오늘날의 도시인들의 생활은 대부분 집이나 아파트, 지하철, 지하상가, 공공건물, 작업장 및 사무실 등의 각종 실내환경에서 생활하고 있으나, 실내공기는 자연 회석율이 부족하여 오염된 공기가 계속적으로 순환되고 있다. 현대 도시인들은 대부분의 시간(약 90%)을 실내에서 보내고 있다는 실정이지만, 실내 공기질에 대한 관심과 개선 노력은 매우 미약한 실정이다. (중략)

  • PDF