• Journal of the Korean Ceramic Society
• /
• v.36 no.1
• /
• pp.89-96
• /
• 1999

Manufacturing conditions of the porous alumina mold were established to overcome various limits of the gypsum mold. For the preparations of the porous alumina mold, an activated charcoal was added to the Al2O3 with the wt% variation and then mixed. The binary slurry was study dispersed based on the examination of the ESA and rheological behaviro. The cylinder type alumina mold was cast in the gyspum mold and characterized by the shrinkage rate at the variable sintering temperature and the resistance against wear. It was proper to make a sintering of the Al2O3 by the surface diffusion which was non-shrinkage sintering mechansim, and intergranular neck growed stronger while sintering was being made. We studied a sintering by three categories; 1) thermodynamic method below 1,000$^{\circ}C$, 2) kinetic method above 1,000$^{\circ}C$ and 3) combined method. In the results of the respective works, combined method was superiro to the others. The prepared Al2O3 mold had relatively high strength, low drying rate, the resistance against the acid or base and good casting behavior.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.1
• /
• pp.34-44
• /
• 1997

The Jurassic granites, commercially called Yangu stone in the Pocheon-Euijeongbu area, have generally compact and coarse-grained textures, which could be classified into two types; grey granite(Gg) and light pink granite(Gp). Specific gravity, absorption ratio and prosity of Gg and Gp in physical property are 2.64 and 2.61, 0.32 % and 0.44 %, 0.86% and 1.13 %, respectively. These higher values of two latters of Gp than those of Gg are due to the more abundant microcracks in Gp. Compressive strength og Gg than those of Gg are due to more abundant microcracks in Gp. Compressive strength og Gg and Gp are 1,726 kg/cm2 and 1,717 kg/cm, respectively and bestrength has a positive proportion with Qz+Af+Pl(quartz+alkali feldspar+plagioclase) modes without trending with Bt+Ac(biotite+accessories). Tensile strength has the positive proportions with Qz+Af+Pl and Bt+Ac. While Bt+Ac has a negative trend with abrasive hardness, Qz+A+Pl shows a positive one. These may suggest Qz+Af+Pl mainly affects on strenghts potentional dimension stone than Gp.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.82-92
• /
• 2012

There are several kinds of tungsten carbide(WC) such as light bulbs, metal cutting tools, drill bits, mining tools, military ordinance, high speed tool steels, chemicals/catalysts, wear resistance parts, jet engine turbine blades, etc.. These days it has been widely studied for the recycling technologies of the used tungsten carbide(WC) from view points of economy and efficiency. In this paper, open/registered patents of US, JP, EP, and KR and SCI Journal related to recycling technologies of the used Tungsten Carbide(WC) between 1969-2011 were reviewed. Patents and papers were collected using key-words searching and filtered by filtering criteria. The trends of the patents and papers was analyzed by the years, countries, companies, and technologies.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.398-406
• /
• 1990

Rapidly growing Populus alba ${\times}$ glandulosa has been massively planted in Korea. However, when the wood is processed, the edges of the sawing machinery and tools are easily worn away and spoiled due to the leaf knot and the crystalliferous substance contained in the wood. This study deals with the distribution diagnoses and types of crystalliferous substance. The concentrations of crystalliferous substance are substantially higher in the heartwood than in the sapwood from the same tree. The degree of concentration different appreciably from the location in the heartwood. The crystalliferous substance are mostly composed of silica, aluminum, calcium carbornate and calcium oxalate. The silica and aluminum granules were observed in the lumen of ray cells, vessels and wood fibers, but the calcium carbonates observed in the leaf knot, vessels and wood fibers formed by styloid and druse. The calcium oxalates of chambered crystals were very common in the phloem parenchyma cells.

• Tribology and Lubricants
• /
• v.35 no.3
• /
• pp.176-182
• /
• 2019

The primary objective of this study is to treat a monocrystalline silicon (Si) wafer having a thickness of $279{\mu}m$ by employing the ultrasonic nanocrystal surface modification (UNSM) technology for improving the efficiency and service life of nano-electromechanical systems (NEMSs) and micro-electromechanical systems (MEMSs) by enhancing of wear and corrosion resistances. The wear and corrosion resistances of the Si wafer were systematically investigated before and after UNSM treatment, wherein abrasive, oxidative and spalling wear mechanisms were applied to the as-received and subsequently UNSM-treated Si wafer. Compared to the asreceived state, the wear and corrosion resistances of the UNSM-treated Si wafer are found to be enhanced by about 23% and 14%, respectively. The enhancement in wear and corrosion resistances after UNSM treatment may be attributed to grain size refinement (confirmed by Raman spectroscopy) and modified surface integrity. Furthermore, it is observed that the Raman intensity reduced significantly after UNSM treatment, whereas neither the Raman shift nor new phases were found on the surface of the UNSM-treated Si wafer. In addition, the friction coefficient values of the as-received and UNSM-treated Si wafers are found to be about 0.54 and 0.39, respectively. Hence, UNSM technology can be effectively incorporated as an alternative mechanical surface treatment for NEMSs and MEMSs comprising Si wafers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.182-188
• /
• 2019

A proper vertical dimension and a harmonious occlusal plane are essential to satisfy a patient esthetically and functionally. A maxillomandibular occlusal vertical dimension is determined by the elevators which repeatedly contracts to a certain length, and a tooth location is determined by a maxillomandibular vertical dimension. The patient of this case came in with the incongruity of the lips and the occlusal plane. The result of clinical test showed the lack of length of the lower anterior due to the reduction of vertical dimension, the deep overbite of anterior, the excessive attrition of anterior, and the incongruity of occlusal plane. After the diagnostic wax-up, the temporary restoration was installed, and final prosthesis was installed after 6 months. As a result, the patient obtained a functionally and esthetically satisfying result.

• Korean Journal of Poultry Science
• /
• v.47 no.4
• /
• pp.219-227
• /
• 2020

As the earth's average temperature rises, crop and livestock productions are at risk. Chickens are sensitive to heat stress, and increased temperatures may have adverse effects on their production performance and animal welfare. Reliable stress measurements are crucial for heat stress adaptation. Therefore, various measurement methods and biomarkers are used to evaluate poultry stress levels. Heat shock proteins (HSPs) are heat sensitive biological markers that are highly expressed under stress, thereby acting as a cellular thermometer. HSPs also have chaperone activity, which protects cells from heat stress. This review details the role of HSP70 as a molecular chaperone and biomarker for heat stress, which is important for breeding climate-adaptable, thermo-tolerant poultry.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.55-62
• /
• 2010

This paper studies the problem seeking an efficient operational scheduling for battle ships in the Republic of Korea's navy. The ships' availability means that their main systems such as weapons, navigation and propulsion are in full operational readiness. If some of the major systems are not ready, then the ships should not be available for operations. It is required to maintain a high level availability under the limited resources as it determines the strength of ROK's navy. However, it will result in inefficiencies if some ships are operated without proper maintenance only to improve their availability. Thus, this study suggests the operational scheduling for two squadron ships that considers multiple objectives such as availability, overlapping maintenance, and deviation from available ships in a particular week. We applied NSGA-II algorithm to find better solutions for more efficient scheduling. The experiment result reached an efficient solutions after 1,500 generations. Two efficient operational schedules were compared on the basis of three multiple objectives among them.

• Journal of dental hygiene science
• /
• v.2 no.1
• /
• pp.39-45
• /
• 2002

Our study shows the following results of the patterns and reality of oral health of 862 Government employees and private school employees who had received oral examinations from April to May, 2000. For the exposition of each group to dental service, the male groups(37.4%) were more exposed than the female ones(30.0%, p<0.05), while the scaling experience results indicated that more ages mean more scaling(the over 50 year group 27.1%, 41-50 group 23.9%, 31-40 group 20.5%, 21-30 group 10.8%, p<0.001). The data involving sweet food and refreshments revealed that 'positive respondents' in the male groups were 19.7% with 12.5% positive in the female ones, and 'negative respondents' were 32.3% and 51.0% in the male and female groups respectively(p<0.001). For the oral odor, the male groups(37.9%) are more severe than the female ones(25.5%, p<0.01). The results of dental caries revealed that 19.1% of the male and 13.9% of the female said 'yes'(p<0.05), with 25.1% of the male and 11.1% of the female suffering from missing teeth(p<0.001); 77.4% of the male and 51.0% of the female from periodontal disease (p<0.001).

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.11
• /
• pp.545-561
• /
• 2007

Location management and message delivery protocol is fundamental to the further development of mobile agent systems in a multi-region mobile agent computing environment in order to control mobile agents and guarantee message delivery between them. However, previous works have some problems when they are applied to a multi-region mobile agent computing environment. First, the cost of location management and message delivery is increased relatively. Second, a tracking problem arises. finally, cloned mobile agents and parent-child mobile agents do not get dealt with respect to location management and message delivery. In this paper, we present a HB (Home-Blackboard) protocol, which is a new location management and message delivery protocol in a multi-region mobile agent computing environment. The HB protocol places a region server in each region and manages the location of mobile agents by using intra-region migration and inter-region migration. It also places a blackboard in each region server and delivers messages to mobile agents when a region server receives location update form them. The HB protocol can decrease the cost of location update and message passing and solve the tracking problem with low communication cost. Also, this protocol deals with the location management and message passing of cloned mobile agents and parent-child mobile agents, so that it can guarantee message delivery of these mobile agents and pass messages without passing duplicate messages.