• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.3
• /
• pp.147-153
• /
• 2018

Cracking in concrete structure must be examined according to appropriate methods, to ensure structural serviceability and to prevent structural deterioration, since cracks opened wide for a long time expedite corrosion of rebar. A site investigation is conducted in a regular basis to monitor structural deterioration by tracking growing cracks. However, the visual inspection are labor intensive. and judgment are subject. To overcome the limit of the on-site visual investigation image processing for identifying the cracks of concrete structures by analyzing 2D images has been developed. This study develops a unique 3D technique utilizing a line laser and its projection image onto concrete surfaces. Automated process of crack detection is developed by the algorithms of automatizing crack map generation and image data acquisition. Performance of the developed method is experimentally evaluated.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.1-6
• /
• 2009

The holding voltage of high-voltage devices under the snapback breakdown condition has been known to be much smaller than the operating voltage. Such characteristics cause high-voltage ICs to be susceptible to the transient latch-up failure in the practical system applications, especially when these devices are used as the ESD(ElectroStatic Discharge) power clamp circuit. A new latchup-free design of the ESD power clamp circuit with stacked-bipolar devices is proposed and successfully verified in a $0.35{\mu}m$ 3.3V/60V BCD(Bipolar-CMOS-DMOS) process to achieve the desired ESD level. The total holding voltage of the stacked-bipolar devices in the snapback breakdown condition can be larger than the operating voltage. Proposed power clamp operates safely because of the high holding voltage. From the measurement on the devices fabricated using a $0.35{\mu}m$ BCD Process, it was observed that the proposed ESD power clamp can provide 800% higher ESD robustness per silicon area as compared to the conventional clamps with a high-voltage diode.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.81-87
• /
• 2020

Crack control is essential to increase the durability of concrete significantly. Healing of crack can be controlled by rehydration of unreacted clinkers at the crack surface. In this paper, by comparing the results of isothermal calorimetry test and regression analysis, the Parrot & Killoh's cement hydration model was verified and clink er hydration model was proposed. The composition and quantification of hydration products were simulated by combining kinematic hydration model and thermodynamic model. Hydration simulation was conducted using the verified and proposed hydration model, and the simulation was performed by the substitution rate of clink er. The type and quantity of the final hydration product and healing product were predicted and, in addition, the optimal cementitious material of self-healing concrete was selected using the proposed hydration model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.283.2-283.2
• /
• 2016

최근 ZnO는 무독성, 저가격, 수소 플라즈마에 대한 내구성 및 열적 안정성 등의 활발히 연구되고 있으며, III족 원소(Al, Ga, In) 불순물을 도핑하여 전기적 성질의 열적 불안정성을 해결하고 전기적 성질을 향상 시키고 또한 밴드갭 에너지가 3.3 eV 이상으로 증가하여 가시광선 영역에서 광투과율이 높은 투명도 전성 재료를 제공할 수 있다. 본 연구에서는 RF Magnetron Sputtering을 이용하여 내열성과 광학적 측면에서 우수한 성능을 가지는 PES 기판에 표면 에너지를 높이고 치밀한 구조의 박막을 증착하기 위해서 $O_2$ 플라즈마 처리를 하여 ZnO계 투명 전도막을 제작함으로써 투명전극에서 요구하는 $10^{-3}{\Omega}{\cdot}cm$ 이하의 낮은 비저항과 80% 이상의 광투과율을 가지는 방안에 대하여 연구하였다. PES 기판 위에 고밀도 $O_2$ 플라즈마를 이용하여 전 처리를 실시한 후 4인치의 Al-doped ZnO(ZnO 98 wt% : $Al_2O_3$ 2 wt%), AZO의 타겟을 이용하여 상온에서 RF Magnetron Sputtering 법으로 AZO 박막을 증착하였다. PES 기판상의 AZO 박막 두께가(100~400nm) 증가함에 따라 캐리어 농도와 홀 이동도가 점차 증가하는 경향을 보였다. 이는 박막 두께가 증가할수록 면저항과 비저항은 감소하며 결정립 크기가 커지고 결정입계에서 산란이 줄어들기 때문에 전기적 특성이 개선된 것으로 판단된다. 고밀도 $O_2$ 플라즈마 표면처리 시간이 증가함에 따라 플라스틱 기판의 결합에너지와 부착력이 증가하여 AZO 박막의 결정립 크기를 증가시키며, 접촉각은 감소하였다. 또한 급속열처리 온도가 증가함에 따라 전기적 특성과 광학적 특성이 향상됨을 확인할 수 있었다. 제작된 AZO 박막은 급속열처리 시간 10분에서 온도 $200^{\circ}C$일 때, 캐리어 농도 $2.32{\times}10^{21}cm^{-3}$, 홀 이동도 $4.3cm^{-2}/V$로 가장 높은 것을 확인할 수 있었고, 가장 낮은 비저항 $1.07{\times}10^{-3}{\Omega}{\cdot}cm$과 가시광 영역(300 nm ~ 1100 nm)에서의 AZO 박막의 광 투과율은 약 86%를 얻을 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.5021-5028
• /
• 2015

Previous studies have considered the permeability and construction method of paving materials, thus focusing on more practical issues rather than basic research of their properties. The present study investigated the possibility of using an elastic paving material having lesser thickness in the resurfacing of existing concrete or asphalt paved areas while satisfying the necessary conditions of resilience and water permeability. An alternative to complete reconstruction would reduce the amount of resource wastage and environmental pollution, as well as the cost of projects. This study investigated five variants of thickness (10, 13, 15, 20, 25mm) and three mixing ratios of binder to rubber chips (20, 22.5, 25%) to ascertain the ideal basic properties of each. The obtained test data revealed that a minimum thickness(10~25mm) of the elastic paving materials can be determined from a qualitative point of view, and alternatives should be provided to improve the durability of the paving material on account of the temperature sensitivity.

• Journal of KIISE
• /
• v.44 no.2
• /
• pp.208-212
• /
• 2017

Flash SSDs have many advantages over the existing hard disks such as energy efficiency, shock resistance, and high I/O throughput. For these reasons, in combination with the emergence of innovative technologies such as 3D-NAND and V-NAND for cheaper cost-per-byte, flash SSDs have been rapidly replacing hard disks in many areas. However, the existing database engines, which have been developed mainly assuming hard disks as the storage, could not fully exploit the characteristics of flash SSDs (e.g. internal parallelism). In this paper, in order to utilize the internal parallelism intrinsic to modern flash SSDs for faster query processing, we implemented a prefetching method using asynchronous input/output as a new functionality for secondary index scans in MySQL InnoDB engine. Compared to the original InnoDB engine, the proposed prefetching-based scan scheme shows three-fold higher performance in the case of 16KB-page sizes, and about 4.2-fold higher performance in the case of 4KB-page sizes.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.607-614
• /
• 2015

Generally surface finishing of building is done with water paint that performs basic water repellency and resisting. When painting the exterior of the building with water paint, application method is easy and inexpensive and it has the advantage of building maintenance. But surface finishing of water paint is easy to discolored or aging due to ultraviolet light so the effect is not satisfying than expected. Therefore this study is to analyze durability of water-repellent paints mixed with water-repellents as outer surface finishing materials, and evaluate its feasibility. Color change and color different due to the accelerated time were tested, and the feasibility was evaluated based on the test results. The experimental results of color different, brightness different and chromaticity suggested that water-repellent paints mixed with water-repellents were suitable for finishing materials. Considering overall general durability performances, stable mixing ratios were 2, 5, and 8%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.118-118
• /
• 2015

플렉서블 기판을 기반으로 하는 휴대용 기기는 다양한 형태로 가공이 가능하고 가벼워 휴대가 용이하며 충격에 강하여 내구성이 좋은 장점을 가지고 있으나 플렉서블 전극 개발이 어려운 문제가 있다. 플렉서블 전극으로 그래핀, 은나노선, 금속메쉬 등의 다양한 재료, 구조에 대한 연구가 진행되고 있으며 특히 은나노선 전극은 공정이 단순하고 투과도 및 전도도가 비교적 우수하녀 가장 강력한 후보재료로 알려져 있다. 그러나 은나노선은 표면거칠기가 매우 크고 헤이즈가 발생하여 OLED 디스플레이용 전극으로 응용시 화면의 선명도가 떨어지며 은나노선 네트워크 형성시 은나노선간의 접촉저항이 증가하는 문제를 가지고 있다. 이러한 문제를 해결하기 위해 최근 산화그래핀을 적용하여 은나노선의 투과도, 전도도, 표면거칠기를 개선하는 연구가 진행되고 있다. 본 연구에서는 은나노선과 산화그래핀 나노복합체를 형성하고 플렉서블 기판에 전사하는 공정방법을 통해 투명전극을 형성하였고 산화그래핀이 포함되지 않은 전극과 비교하여 전극의 성능이 향상됨을 확인하였다. 주사전자현미경 측정을 통해 플렉서블 기판에 포함된 산화그래핀-은나노선 전극의 구조적 특성을 조사하였고 면저항측정을 통해 산화그래핀 처리로 인해 전기적 특성이 개선되는 결과를 확인하였다. 전도도 개선의 원인을 조사하기 위해 라만, XPS, 투과도 측정결과를 분석하여 그래핀에 포함된 pyridinic 질소가 감소하고 quaternary 질소가 증가하며 이로 인해 defect sites의 수가 감소하는 결과를 확인하였다. 산화그래핀과 은나노선의 접합부분에서 산화그래핀의 quaternary 질소가 증가하고 산화그래핀에 전하밀도를 증가하여 전도도를 향상하였다. 투과도 측정을 통해 은나노선의 가로방향 플라즈몬 공명 흡수가 산화그래핀 처리에 의해 감소한 결과를 확인하였다. 산화그래핀-은나노선 나노복합체의 전도도 향상 원인에 대한 연구는 은나노선의 플렉서블 전극 응용을 가속화하고 잠재적인 응용분야를 확대하기 위한 원천지식을 제공할 것이다.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.708-717
• /
• 2002

Durability is a major concern in the design and construction of concrete structures which are located in the sea environments. In particular, the combined action of chlorides, sulfates, and carbonation nay influence greatly the deterioration behavior of concrete structures. The purpose of the present study is to explore the diffusion characteristics of chloride ions in concrete structures under combined deterioration conditions. The present test results indicate that the chloride penetration into concrete structures is more pronounced under combined attacks of chlorides, sulfates and carbonation. The diffusion coefficients and surface chloride contents were found to increase under combined multiple deterioration conditions. The present study provides quantitatively the penetration and diffusion characteristics of chloride ions in concrete structures under various deterioration conditions. The results of present study may be efficiently used for the realistic design of concrete structures under combined deterioration conditions.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.6
• /
• pp.209-215
• /
• 1995

Corrosion of steel reinforcment is the most significant factor of deterioration in reinforced concrete structures. Chloride ion is considered one of the most common culprits in the corrosion of steel in concrete. It breaks down the passive film and allows the steel to corrode actively at a high rate. The main objective of this study is to determine the critical chloride ion concentrations in the pore solutions and chloride binding effect of cement pastes made with and without fly ash. Cement pastes with water-binder ratio of 0.5, allowed to hydrate in sealed containers for 28 days and to express pore solution. The expressed pore fluids were analyzed for chloride and hydroxyl ion concentrations. Evaporable water on paralled specimens was determined a.s the loss of weight per 100g of unhydreded cement when the specimens were heated to constant weight at 105'C. It was found that the replaced cement with fly ash has negligible influnce on the chloride binding and chloride binding capacity and rises the $Cl^-$ /$OH^-$ ratio in pore solution.