• Composites Research
• /
• v.35 no.6
• /
• pp.425-430
• /
• 2022

In this study, the mechanical properties of the pressure vessel composite exposed to the thermal environment were evaluated to establish the standard for high temperature static pressure test of the pressure vessel for hydrogen bus. As the tensile strength of the composite material approaches the glass transition temperature of the epoxy resin, the strength decreases due to the deterioration of the epoxy resin. In addition, it was confirmed that the tensile strength increased again due to the post-curing of the epoxy resin during long-term exposure. Therefore, the accelerated stress rupture test conditions of the pressure vessel for the hydrogen bus should be set based on the epoxy resin properties of the carbon fiber composite material.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.20-29
• /
• 2022

In this study, in order to improve the durability of the cement composite printed with the ME type 3D printer, PDMS, sodium silicate, and a surface hardener were employed. Post-treatment was performed on 3D-printed cement composite by coating after immersion, and the degree of improvement in durability was evaluated. As a result, in all evaluations, the durability performances of the post-processed specimens were improved compared to those of the plain specimens. Water absorption resistance, chloride penetration resistance, and carbonation resistance of the PDMS treated specimens were improved by 36.3 %, 77.1 %, and 50.4 % when compared to plain specimens. Freeze-thaw resistance of the specimens treated with sodium silicate was found to be the most excellent, with an average enhancement of 47.5% compared to plain specimens. It was found that PDMS was the most efficient post-treatment materials for 3D-printed cement composite. However, as suggested in this study, the post-treatment method by coating after immersion may not be applicable to cement composite structures printed with a 3D printer in field. Therefore, a follow-up study needs to be preformed on the durability enhancing materials suitable for 3D printing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.296-302
• /
• 2019

In this study, a basic durability assessment was performed by selecting the main part of a trial product of a shale shaker, which is one of components for a mud circular system. For a preliminary durability assessment, it was assumed that the lifetime of the bearing for the vibrator motor and the stiffness of the support spring are affected by the vibration when the motor operates continuously. In the case of the motor, the initial p-p level was 0.72 g, but after 100 hours of operation, the p-p level was rapidly increased to 1.26 g. Bearing defects could be estimated through ball defect frequency analysis. In the case of the spring, the stiffness of the spring was reduced by approximately 3.78% at the end of 2,000 hours of the fatigue-durability test by applying excitation conditions to shale shaker body. In the future, we will analyze the influence of the particle removal efficiency of the shale shaker.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.6
• /
• pp.537-546
• /
• 2010

This research work contributed to a study for the procedure and methodology to assess the fatigue durability for a composite torque link of helicopter landing gear, which was newly developed and fabricated by the resin transfer moulding technique to interchange with metal component. The simulated load spectrum anticipated to be applied to the torque link during its operation life was generated using an advanced method of probabilistic random process, and the fatigue durability was evaluated by the strength degradation approach on the basis of material test data. The full scale fatigue test was also performed and compared with the analysis results.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.233-241
• /
• 2018

In this paper, we develop a durability test method that can verify the noise caused by the repeated load on the door trim grip handle. The test method was developed in consideration of the load mode and durability test cycle applied to the grip handle. In order to verify the validity of the method, we demonstrated the door trim grip handle noise that occurred in the field claim with the product in the early stage of mass production through the developed test method. Finally, It is used to detect and improve the noise of subsequent development products through the currently developed test method.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.73-79
• /
• 2000

본 논문은 BCPS(Balanced canister purge solenoid valve) 의 Lab. 내구 시험 Spec. 결정 방법에 관한 것이다. BCPS 는 기존에 사용 중인 CPS(Canister purge solenoid valve) 의 응답성과 제어의 용이성을 좋게 하여 배기 가스 특성을 향상시키기 위해 CPS 내부에 Rubber 재질의 막(Diaphragm) 을 적용한 것이다. 하지만 이 Diaphragm 이 마모 등에 의해서 찢어지면, 오히려 배기 특성이 저하된다. 따라서 BCPS의 적용을 위해서는 이 Diaphragm 의 내구성이 검증되어야 하며, 이를 위해서는 새로운 신뢰성 시험 Spec. 의 개발이 필요하다. 본 연구에서는 BCPS Diaphragm의 검증을 위해 필요한 신뢰성 시험 Spec. 을 결정하였다. 이를 위해, X-ray Inspection System등을 이용하여 부압에 따른 Diaphragm 의 형상 변화 등을 관찰하였으며, 실제 차량에서 Diaphragm 에 걸리는 압력의 분포를 측정하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.93-99
• /
• 2016

In this paper, we investigated the mechanical and electrical reliability of silver nanowire (AgNW) films. In particular, the durability and reliability of AgNW films were studied when the AgNW film was subjected to the bending deformation under current flow. The electrical durability of AgNW was evaluated by observing changes in heat generation and current density occurring in AgNW through voltage and current tests. The AgNW film showed a constant resistance change up to a bending radius of 2 mm and 200,000 cycles in the bending fatigue tests. The over-coating layer has an effect of improving the durability of the AgNW film. In the case of AgNW with the over-coating layer, heat was uniformly dissipated on the surface of AgNW film, whereas in the case of AgNW film without the over-coating layer, heat was generated locally. In the bending test under the current flow, the current density of the AgNW film was continuously decreased up to 52.4%. During bending, the AgNW was deformed due to mechanical deformation such as tensile, bending and sliding of the AgNW, consequently contact resistance of the AgNW was increased, leading to a electrical breakdown of AgNW by Joule heating. It was found that the application of the over-coating layer can improve the electrical and mechanical reliability of the AgNW film.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.5
• /
• pp.485-500
• /
• 2020

Due to various advantages such as small facilities, ease of construction and so on, the grouting technology which is widely used in construction field has developed remarkably compared with the past. However, the efforts to improve the homogeneity of quality, long-term durability and environmental problems have been continued. In recent years, new grouting method has been developed in order to solve problems such as low strength, durability and leaching phenomenon of liquid glass (sodium silicate) grouting material in Korea. A newly developed method integrates the injection material with the ground by the self-healing material of crystallization growth type. For this reason, it is known that improvement of the durability and water quality of the ground, prevention of leaching, and environment friendliness can be expected. The present study applied a newly developed method to test sites and verified its effect such as injection range, improvement effect, waterproofing performance and so on. Standard penetration test, field permeability test, borehole shear test, pressuremeter test and pH test were conducted, and the results were compared between before and after developed method application. As results of tests, the field applicability and improvement effect of developed method were proved to be excellent.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.11a
• /
• pp.139-140
• /
• 2007

• Proceedings of the Korean Reliability Society Conference
• /
• 2002.06a
• /
• pp.111-111
• /
• 2002

당사 제품인 건설 중장비용 대형 용접 구조물에 대하여, 설계단계부터 구조해석 및 초도품에 대한 Rig Test, 실차 시험 등 여러 단계를 거쳐 내구성을 평가하고 있다. 그러나 용접품 특성상 수명 평가 및 예측이 용이하지 않아 특히 내구성 개선 또는 효율 증대를 위한 경량화 등의 필요에 따른 설계 변경시 시행착오를 거치는 경우가 많다. 이에 개발 일정의 지연, 시험 비용의 증대 등이 불가피하고, 보증 수명의 증대를 통한시장 확대 등에 있어서도 애로가 있다. 또한 기존 Rig Test의 경우도 실제 사용환경과의 차이 등으로 인해 필드에서의 사용 수명을 예측하는데 한계가 있다. 이에 당 센터에서는 통계적 분석을 통한 사용 조건의 DB 구축과 제품 품질 DB의 구축 및 통합을 통하여 제관품의 특성을 반영한 용접 구조물의 가속 수명 평가법의 신뢰도 향상과 시장 목표에 부합하는 최적 설계 달성을 위한 독자적 Tool을 개발하고 있으며, 이에 대한 첫 번째 과제로 기확보 데이터에 대한 상관관계를 분석하였다.