• 감성과학
• /
• 제19권4호
• /
• pp.71-82
• /
• 2016

시대가 급속히 변화함에 따라 남성의 라이프 스타일, 개성, 가치관 등이 다양하며 과거에 비해 남성복에 대한 기호도 변하였을 뿐만 아니라 또 남성복 시장이 증대되었고 전에 없던 새로운 스타일이 많이 등장하였으나 활발한 여성복 감성 연구와 달리 남성복의 스타일에 따른 감성 연구는 미비한 실정이다. 이에 20대 남성들이 주로 착용하는 스타일을 7가지 대표 자극물로 선정하고 자극물로 제시하여 각 스타일에 대한 소비자의 감성을 조사하였다. 스타일 1 (정장), 스타일 2 (라이더재킷+스키니 팬츠), 스타일 3 (블루종+스트레이트 팬츠), 스타일 4 (박시한 가디건+하프 팬츠), 스타일 5 (야전상의+스트레이트 팬츠), 스타일 6 (루즈핏 재킷+스키니 팬츠), 스타일 7 (야구점퍼+스트레이트 팬츠) 등 남성복 스타일에 따른 감성의 차이를 조사하였으며 성별에 따른 남성복에 대한 관심과 지식정도 차이를 비교하였고 남성복의 선호와 실제착용 간에 차이가 있는지 분석하였고 라이프 스타일 유형에 따른 선호하는 스타일을 측정하였다. 그 결과는 다음과 같다. 첫째, 남성복은 다양하고 세분화되었고 남성복에 대한 관심과 지식은 남성이 여성보다 높게 나타났다. 둘째, 남성복에 대한 감성은 스타일에 따라 유의한 차이가 있었지만 이는 성별에 따라 다르지 않았다. 셋째, 20대가 가장 선호하는 선호스타일과 실제로 즐겨 입는 착장스타일 간에는 차이가 존재하였는데, 일치하는 비율은 66.1% 이었고, 불일치하는 경우는 33.9% 이였다. 선호도와 실제 착용도가 가장 높은 것은 스타일 3 이었으며, 가장 선호되지 않고 착용되지 않는 것은 스타일 5 이었다. 넷째, 내향적보다 외향적 라이프 스타일을 지닐수록 더 다양한 스타일에 대하여 선호도를 나타내었다.

• 한국콘텐츠학회논문지
• /
• 제12권12호
• /
• pp.577-586
• /
• 2012

이 연구는 진재킷과 진팬츠에 관한 연구로 패션컬렉션에 제시된 진재킷과 진팬츠의 디자인 특성을 분석하고 활용 가능성을 모색함으로써 진패션 디자인 연구와 패션산업의 상품 기획에 기초자료를 제공하고자 한다. 2007년 S/S시즌에서 2011년 F/W시즌까지의 사진을 수집하여 통계프로그램 SPAW를 활용하여 빈도, 백분율을 사용하여 분석하였다. 연구 결과를 요약하고 결론을 정리하면 다음과 같다. 남성의 진재킷에서 심플한 디테일에 미디움길이, 사각형실루엣을 활용하고, 여성은 여성스러움을 강조한 X자형 실루엣과 쇼트길이의 다양한 디테일을 활용한다. 남성의 진팬츠는 스트레이트 실루엣과 컴포트 실루엣으로 활용하고 여성은 다양한 실루엣, 피트, 길이로 다양한 이미지로 진을 활용할 수 있을 것이다.

• 한국의류학회지
• /
• 제35권1호
• /
• pp.26-36
• /
• 2011

The study analyzes the development of slim-fit formal pants patterns for middle-aged men. This study suggests a new pattern that complements the problems of the existing fit on the basis of the standard nude size for middle-aged men with lower garments through the analyses of one-tuck pants patterns from 5 popular brands. As a result, the waistline is lowered by 0.8cm out of consideration for the waist circumference. The crotch extension is reduced by 1.5cm, the back crotch length is revised, the center back waist point is raised by 0.9cm, and the hip line is straightened. The slim-fit is perfected of the new lines from the thigh to knee-line.

• 한국의류학회지
• /
• 제35권3호
• /
• pp.312-324
• /
• 2011

This investigates the type of pants preferred by Korean men in their 20s through a subjective wear test. Six types of men's pants were developed as experimental garments. The male subjects were university students between the ages of 20 and 24. Subjective wear sensations of the experimental pants were rated using seven Likert scales. A 7-point Likert-type scale was used for the evaluation, with 7 indicating the best fit. As a result, a basic men's sloper for lower body clothing was developed based on SizeKorea 2004 anthropometric measurements surveyed between 2003 and 2004. A basic pattern (A) was manipulated to tight-fit pants (E) and loose-fit pants (D, L, M, and N) by considering the ease at hip level and the style. Among the six pants, pants D and L (4cm ease at hip level) were found to be superior to others in terms of comfort, fitting, and crotch depth. With regard to ease and comfort of the crotch part, pants E and A (0cm ease at hip level) were found to be the least preferred.

• 복식
• /
• 제63권8호
• /
• pp.27-42
• /
• 2013

The study was aimed to develop men's working pants patterns through the computerized 3-D virtual clothing simulation system and to verify the effects of the 3-D simulated outfit by comparing it to the images of the actual outfits. The average body measurements of South Korean men aged between 30 and 39 used for the simulation in order to generate a 3-D virtual model and to realize outfits of men's working pants for the workers in the heavy industry in South Korea. And also the preliminary questionnaire survey results on certain aspects of the working pants such as type, detailed design preference and discomforting parts were taken into consideration. Both the simulated and real images of the developed working pants were compared in terms of the ease amount according to parts of the working pants, the position of seam lines, the appearance of darts and pleats, and the effects of the fabric surface according to expertise panels' subjective 5-point scale evaluation. The results throughout the study were (1) the basic working pants item worn by subject workers were the straight one pleated pants. The most discomforting parts of the working pants were in the order of body rise, thigh, hip, waist, pants hems and knee girth. (2) the drafting factors of pants patterns differed by the men's body features, which was related to the allocation of suppression amounts between waist and hip girths into darts and hip curve amounts on the waist line level of the pants. (3) the similarity of the virtually simulated and real images of men's working pants resulted in an average of 4.5 to the ease of appearance, 4.6 to the seam lines, 4.1 to the fabric surface effects in a 5-point scale, which means that the two were highly alike.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.410-421
• /
• 2018

The study is designed to develop a educational basic pants patterns for men, and has been analyzed focusing on the university textbooks published since 2000. We also used CAD programs and virtual fitting programs to analyze the fitness of pants. To do this purpose, after choosing 7 Men's Wear textbooks, selected patterns were drawn and measured using PAD system and were compared and analyzed. Also, the appearance evaluation was examined through virtual fitting and then evaluated 21 male and female university students in their 20s. After supplementing the problems of the patterns in the existing textbooks, a pattern was developed and verified the fitness of the developed pattern. The results of comparing the proposed measurement items of each textbook for the pants pattern indicated a significant differences in terms of hip circumference of each pattern, which were between 96~105cm. A comparison of the drafting methods of each pattern showed the drafting methods for the crotch length, the front crotch extension, the back crotch extension were the difference. The results of appearance evaluation were pattern E presented the slimmest fit and pattern D presented the loosest fit. As a result of analysis of pants pattern, a waist circumference 82cm, a hip circumference 98cm, a crotch length 24cm, a pants length 104cm and a ham line width 46cm were most suitable. The development pattern was evaluated as superior to the existing pattern through the appearance evaluation of the virtual fitting.

• 패션비즈니스
• /
• 제14권2호
• /
• pp.1-13
• /
• 2010

Recently, young men have become more muscular, as they have become increasingly more interested in health and their physical appearances. The trend these days is to wear slim suits to accentuate their figures. Men's pants are the one of the most general clothes which men wears. While pants are an ordinary item of clothing, most muscular men have fitting problems with ready-made pants. In view of this, this study aimed at developing a prototype pants pattern for muscular men. In this study, five muscular men were selected for wearing tests. The regression formulas, in which muscular men's body measurements were adopted, were applied to unsuitable body parts, especially the body parts determined inappropriate based on the results of the existing pants pattern wearing tests. After going through the first and second pants pattern wearing tests, the final pants patterns were developed that were suitable for muscular men. The results of the study were as follows: In order to solve the problem of the insufficient of ease due to the development of the hip muscles, the crotch length was made longer, (0.08${\times}$hip circumference+17.648)+1.5cm and front crotch width and back crotch width were made wider, 1.0cm each than those of the existing pants prototype patterns. The ease of 0.5cm was added to the hip circumference/4+2.5cm because of the development of the hip and thigh muscles.

• 한국의상디자인학회지
• /
• 제17권1호
• /
• pp.105-115
• /
• 2015

This study aims to compare the ease of men's single-pleated pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The researchers selected five(four educational materials and one industrial pattern) slim-fit single-pleated pants which is the current fashion trend in menswear. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing, opacity, and clothing pressure. The results showed that D pants had the greatest ease on the waist circumference, while C pants had the least ease. The E pants had the greatest ease on the hip circumference, then B pants and C pants showed less ease. Also, the E pants had the longest on the pants length, then D pants showed the shortest. In the appearance evaluation, A pants received the most favorable results, followed by D, B, E, and C pants, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem in all pants, so the clothing pressure was high. From the results, we can understand that each of the 5 single-pleated pants patterns has different ease amount and silhouette.

• 복식문화연구
• /
• 제21권3호
• /
• pp.431-439
• /
• 2013

This study aims to give practical help to the pattern making of baggy pants produced in large quantity from industrial fields. The functionality of crotch part is a key element to decide wear sensation and comfort of pants as having direct influence on movements of legs in pattern designing of baggy pants. The industrial patterns of baggy pants in various styles that are released currently in Korea were collected and a comparative analysis was conducted on them for the thesis. First, samples of men baggy pants were collected from three different brands and compared the completion sizes. Secondly, it studied the most appropriate patterns as quantifying the appropriateness of movements through fitting tests. Finally, the study verified the differences of visual images by surveys of professional groups. The conclusions obtained from this research are as follows. In terms of aesthetic attribute among the three brands, A baggy pants, which had a small size tolerance, were the most appropriate. Meanwhile concerning the appropriateness of movement, B baggy pants were shown to be the most appropriate. This reveals explicitly the problem of aesthetic attribute and functionality, which are always in conflict during the pattern design. It is necessary to develop patterns and establish a measurement system that may satisfy both of these factors.

• 복식문화연구
• /
• 제22권4호
• /
• pp.605-618
• /
• 2014

This study aims to compare the ease of men's slim pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The study selected four educational materials and one industrial pattern of slim pants for a total of five items. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing and opacity, and a comparison was performed regarding the clothing pressure when the virtual model was standing and walking. The results of our comparison of the patternmaking for slim pants showed that pattern C pants had the greatest ease on the waist circumference, while B pants showed no ease. The C and E pants also had the most ease on the hip measurement. In the appearance evaluation, A pants received the most favorable results, followed by D, E, B, and C, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem when standing in all pants, so the clothing pressure was high. While walking, the stress appeared to be different for the left and right parts of the body, and the most significant difference was observed on the thigh area.