• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.12
• /
• pp.1004-1012
• /
• 2014

In this study, blowoff was investigated in a ducted combustor with the bluff body when acoustic excitation was forced. To observe the flame structure, OH radical chemiluminescence was used and the image was analyzed by using POD (Proper Orthogonal Decomposition) algorithm. Natural gas mainly composed of methane was used as fuel. Blowoff occurred when the equivalence ratio was reduced. Equivalence ratio causing blowoff was measured by changing air flow rate, excitation frequency and sound pressure. Blowoff equivalence ratio was varied depending on the experimental conditions. Vortex frequency behind the bluff body and resonance effect in combustor are the main factors that affect the blowoff equivalence ratios with the excitation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.133-140
• /
• 2002

This article presents an application of a large-scale structural mixing model(Broadwell et at. 1984) to the blowout of turbulent reacting cross flow jets. Experimental observations, therefore, aim to identify the existence of large-scale vortical structure exerting an important effect upon the flame stabilization. In the analysis of common stability curve, it is seen that the phenomenon of blowout are only related to the mixing time scale of the two flows. The most notable observation is that the blowout distance is traced at a fixed positions according to the velocity ratio at all times. Measurements of the lower blowout limits in the liftable flame are qualitatively in agreement with the blowout parameter $\xi$, proposed by Broadwell et al. Good agrement between the results calculated by a modified blowout parameter $\xi$'and the present experimental results confirms the important effect of large-scale structure in the stabilization feature of blowout.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.39-39
• /
• 2010

최근 자동차 산업에서는 차체의 무게를 감소시켜 연비향상과 배기가스의 양을 줄이려는 목적으로 고강도 강재의 차체 적용이 증가하고 있다. 또한 다른 여러 산업에서도 두께 감소를 통한 경량화를 위해 고강도 강재가 사용되고 있다. 고강도 강재를 자동차 차체에 적용하면서 용접성에 대한 새로운 문제가 제기 되고 있으며 그 중 자동차 생산라인에서 차체의 조립공정의 대부분을 차지하는 저항 점 용접에 대한 연구가 중요한 이슈가 되고 있다. 이러한 고강도 강재의 저항 점 용접의 문제점으로는 잦은 날림발생을 들 수 있다. 이는 강도의 증가에 따른 비저항 증가와 필요 가압력의 증가로 인해 입열에 의한 가압부의 소성변형이 쉽게 발생하기 때문이다. 이를 방지하기 위해 현재 다단가압, 다단전류제어 등의 기법들이 시도되고 있다. 본 연구에서는 저항 점 용접의 펄스전류 파형설계를 통해 고강도강 용접의 날림발생을 저감하고자 하였다. 실험소재로는 Al-Si 도금의 1.5GPa 급 강재를 사용하였고 실험조건으로는 기존 로브곡선에서 날림이 발생하는 용접조건을 사용하였다. On/Off 방식의 펄스전류를 이용하여 On/Off 시간에 따른 용접성을 평가하여 이를 기존 용접성과 비교하였다. 또한 펄스전류 파형에 따른 입열과 냉각의 변화와 날림발생에 미치는 영향을 분석하였다.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.63-65
• /
• 2004

아연도금강판은 일반 냉연강판에 비해 내식성과 내구섣이 우수하여 자동차, 토목, 건축, 가전산업 등 여러 분야에 널리 사용되고 있다. 그러나 저항용접 시 낮은 용점의 아연이 전극을 오염(Pick up)시켜 적정 용접전류가 높아지고 연속타점 시 저극의 오염으로 인해 날림(Splash)를 발생시켜 작업환경과 모재에 악영향을 주고있다. (중략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.125-132
• /
• 2002

An experimental study on the characteristics of stability of propane turbulent nonpremixed jet flames discharged normal to air free-streams with uniform velocity profile is conducted. Experimental observations are focused on the flame shape, the stability considering two kinds of flame, lift-off distance, and the flame length according to velocity ratio. In order to investigate the mixing structure of the flame base at the lower limit, we employ the RMS technique and measure the species concentration by a gas chromatography. In the results of the stability curve and lifted flame, it is fecund that the dependency of nozzle diameter is closely related to the large-scale vortical structure representing counter-rotating vortices pair. Also, the detailed discussion on the phenomenon of blowout due to this large vortical motion, is provided.

• Water for future
• /
• v.57 no.3
• /
• pp.80-89
• /
• 2024

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.414-419
• /
• 2006

The ballast or other objects may be located on the rail road by a lump of ice, repairing operation on the track, or the strong gust due to the high speed running of the train. When a train operated in this condition, it causes serious damages to the wheel, train, and structures near the track, or the secondary ballast flying. To remove these objects safely, a ballast blower is suggested which was attached under the train. Firstly, the numerical analyses are investigated to find out the basic flow characteristics of the ballast blower. Next, the performance of the ballast blower is verified by wind tunnel experiments. Through these studies, it is expected that the ballast blower can be applied practically.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.729-738
• /
• 2010

The characteristics of lifted butane flames diluted with nitrogen have been investigated experimentally in order to elucidate the mechanism of individual flame oscillation modes. Flame oscillations in laminar free-jet lift-off flames are classified into the following five regimes: a stabilized lift-off regime (I), a heat-loss-induced oscillation (II), a buoyancy-induced oscillation along with a heat-loss-induced oscillation (III), a combined form of an oscillation prior to blow-out and a heat-loss-induced oscillation (IV), and a combination of an oscillation prior to blow-out and a buoyancy-induced oscillation along with a heat-loss-induced oscillation (V). The characterization of the individual flame oscillations modes are presented and discussed using Strouhal numbers and their relevant parameters by the analysis of the power spectrum for temporal variation of the lift-off height.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.102-104
• /
• 2005

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.55-60
• /
• 2009

This study was carried out to propose the optimum technologies that can be applicable to noise and fugitive dust controlling in construction sites by comparative analysis in cases. The ninety three environmental management technologies applied to fifty-five construction projects conducted during 2005~2007 in Korea were analyzed by checklist method. The construction companies paid more attention to the noise and fugitive dust controlling technologies than the waste and wastewater. The diverse pollution controlling techniques were applied to the architectural projects than the civil projects to meet the environmental requirements in residential area. The fugitive dust controlling technologies(75.3%) were more widely applied to all construction projects than the noise controlling technologies(24.7%). As the noise controlling techniques, the noise barriers in wall-form which are set up as boundary in construction site were more widely used than the noise barriers in curtain-form, in cabin and silencers. Water spraying systems, wind barriers and mechanical sweepers were the preferred technologies for controlling fugitive dust emission.