• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.107-115
• /
• 2002

A parametric study has been conducted to evaluate the effects of finite element modeling methods on the internal loads, sizing and the weight of the multi-spar aircraft wing structures. The wing is idealized into total 18finite element models and subjected to 4typical external load conditions. An automatic sizing algorithm based on MSC/NASTRAN and MSC/PATRAN is developed. The results show that the critical part affection the internal loads and weight of the structure is wing skin. Effect of modeling of the spar and rib on the structural behavior is not manifest. On the contrast to the general expectation, the models using the bending-resistant elements show the heavier weight than ones by the elements without bending stiffness. From this results, designers of multi-spar wing are recommended to construct the finite element model considering the bending stiffness, or to check the characteristics of the structure before modeling.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.37-37
• /
• 2000

복합재료는 높은 무게비 강도 및 강성뿐만 아니라 우수한 재료 특성 때문에 경량화와 구조적 안전성이 요구되는 항공기의 구조재로서 사용이 증대되고 있다. 소형 민용항공기는 구조적 안전성과 함께 제작과 정비, 유지보수의 용이성이 중요시된다. 본 연구에서는 복합재료를 구조재로 사용하였을 때의 성능변화와 경량화 등을 검토하기 위하여 기존의 알루미늄 합금을 이용하여 설계된 소형 프로펠러 경항공기 날개의 구조재로서 복합재료를 사용하여 재설계하였다. 날개의 기본 구조는 스킨, 스파, 웹으로 구성된 상자형 단면으로 설계하였으며 날개의 구조재로서 탄소/에폭시를 사용하여 상용 유한요소해석코드인 NISAII를 이용하여 굽힘, 좌굴 등의 응력해석을 수행하였고 기존 설계된 날개와의 성능비교를 위하여 알루미늄 합금으로 설계된 날개를 모델링하여 해석한 결과와 비교하였다. 비교결과 구조재로 탄소/에폭시를 사용하여 설계된 날개가 무게비 성능면에서 더 우수함을 확인하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.109-116
• /
• 2002

The solution of the aircraft wing spar cross-section area optimization problem is obtained by the response surface method. The object function of the problem is wing total weight, design variables are spar cross-section areas, constraints are the conditions that the stresses at the each spar is less than the allowable stress. D-Optimal condition is utilized to obtain the experimental points to construct the response surfaces. D-Optimal experimental points are obtained by the commercial software "Deign-Expert". Response values for the object function and constraints for each experimental point are calculated by the NASTRAN. Response surfaces for object function and constraints are approximated from the response values by the least square method. The optimization solution is obtained by the DOT for the response surfaces of object function and constraints. The optimization results obtained from the response surface are compared with the results obtained by the NASTRAN SOL200.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.28-28
• /
• 1999

본 연구는 이전 연구에서 500KW급 중형 수평축 발전기를 설계하였던 경험을 토대로 750KW급 대형 수평축 풍력발전용 복합재 회전날개를 개발하기 위해 수행되었다. 회전날개의 대형화에 따른 구조강도 확보 및 경량화 문제를 해결하기 위해 날개의 단면구조를 변경하였고, 주 하중을 받는 스파부분을 보강하였으며, 취급이 어렵고 가격이 비싼 노맥스 허니컴 대신에 폼을 사용한 샌드위치 구조를 적용하였다. 또한 경량화를 위해 금속재 플렌지형 허브부분 접합방식을 삽입볼트 접합방식으로 구조 설계를 변경하였다. 이러한 복합재 회전날개의 구조적 안정성을 확인하기 위해 상용 유한요소 해석 코드인 NISA II를 사용하였으며, 선형정적해석, 고유진동수해석, 국부 좌굴해석 등을 수행하여, 무게의 증가는 최대한 억제하면서 대형화에 따른 구조강도의 확보가 이루어졌음을 확인하였고, 피로수명해석을 통하여 20년 이상의 요구 수명을 만족함을 확인하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.1-9
• /
• 1998

The exhaustion of fossil fuels and serious environmental pollution put the concern about non-po llution energy into the world. On the developments of technology, wind energy has been spotlighted as a non-pollution energy in many countries. This study has carried out the aerodynamic and structural design procedure of the lightweight composite rotor blades with an appropriate aerodynamic performance and structural strength for the 500㎾ medium class wind turbine system. The previous design, which is shell-spar structure, is redesigned to shell-spar- sandwich structure for light weight. Large deformation problem from light weight is examined by non-linear analysis. Local buckling occurred under lower stress than failure stress. The buckling analysis is accomplished to confirm the safety of the composite blade. The stress analysis around pin hole joint part at hub is carried out and it is confirmed that the pin hole is not failed. The results show that the resonance of redesigned blade does not happen in operation range.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.22-22
• /
• 1997

무공해 에너지원은 화석에너지의 고갈과 환경오염의 심각한 문제로 인하여 절실히 요구되고 있는 실정이다. 그중 풍력발전 시스템은 타 에너지원에 비해 여러 가지 측면에서 유리한 점을 가치고 있다. 본 연구에서는 500Kw급 풍력발전 시스템을 개발함에 있어, 적합한 공력 성능 및 구조성능을 가지는 회전날개 설계과정을 수행하였다. 공력설계는 운용지역의 풍황을 고려하여 회전날개의 외형을 결정하였고 이를 바탕으로 공력성능해석이 수행되었으며, 구조설계는 복합재료를 사용하여 쉘-스파 구조를 갖도록 설계하여 굽힘 및 비틀림 그리고 피로수명에 대한 구조해석이 수행되었다. 그 결과 4m/s의 미풍에서도 운용가능하며, 12m/s에서는 정격출력 550Kw를 생산할 수 있는 형상이 설계되었고, 또한 20년 이상의 피로수명이 확보되었으며, 공질 등의 동적인 문제도 발생하지 않음을 확인하였다.

• Composites Research
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2002

In this study, the flutter analysis for a rectangular box wing and an actual fighter wing with composite shin, aluminum spar and aluminum rib has been conducted. A conservative 3D wing-box model of an actual wing is modeled by MSC/PATRAN and the corresponding free vibration analysis has been performed by MSC/NASTRAN. The finite elements of membrane, rod and shear panel are used. Using the practical ply angles, various composite laminates are composed and analysed. The DLM code which is linear aerodynamic theory in frequency domain is applied to calculate unsteady aerodynamic pressure in subsonic flow region and the V-g and p-k methods are applied to obtain the solution of aeroelastic governing equation in frequency domain.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.1
• /
• pp.22-29
• /
• 2000

In this study, the 750㎾ scale composite blade for the horizontal axis wind turbine system was designed and manufactured, and it was tested and evaluated by the specific structural test rig. In the test, it was found that local bucklings at the trailing edge of the blade and excessive deflections at the blade tip were happened. In order to solve these problems, the design of blade structure was modified. after improving the design, the abrupt change of deflection at the blade tip was reduced by smooth variation of the spar thickness and the local buckling was removed by extending the web length. The modified design was analyzed by the FEM, the safety and stability of th blade structure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.963-971
• /
• 2012

In this paper, development of optimal design tools for wing structure is described including multi load spectra condition and fatigue analysis. Two dimensional CFD result are used for calculating aerodynamic force. Design variables are composed of a number of rib and spar, positions, and thickness of each structural member. The mission profile for fatigue analysis is composed based upon the results of CFD analysis, the flight-by-flight spectra method, the excessive curves for gust loads. Minor's rule was used to deal with multi-load condition. Stress analysis and fatigue analysis are performed to calculate objective functions. Particle Swarm Optimization(PSO) algorithm was used to apply to problems which have dozens of design variables.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.10
• /
• pp.687-694
• /
• 2019

A circular composite spar in the wing of ultra-light aircraft is subjected to both bending moment and transverse shear loads. However, the beam being used in the aircraft may be inefficient because the design would not take into account the characteristics of the circular tube that supports the bending moment in top and bottom arc parts and the transverse load in left and right ones. Therefore, it is necessary to efficiently fabricate the circular tube beam by properly selecting the stacking sequences or the laminated composite structure. In order to increase both bending and transverse shear strengths of the beams, in this study, a cross-section of circular tube is divided into four arcs: top, bottom, left and right ones. The commercial program, MSC/NASTRAN is used to calculate vertical displacement and the normal and shear strains with variation of parameters such as division angle of arc and fiber orientation. Based on the results, the effective parameters for the new circular composite beam are presented to increase its bending and shear strengths.