• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.107-115
• /
• 2002

A parametric study has been conducted to evaluate the effects of finite element modeling methods on the internal loads, sizing and the weight of the multi-spar aircraft wing structures. The wing is idealized into total 18finite element models and subjected to 4typical external load conditions. An automatic sizing algorithm based on MSC/NASTRAN and MSC/PATRAN is developed. The results show that the critical part affection the internal loads and weight of the structure is wing skin. Effect of modeling of the spar and rib on the structural behavior is not manifest. On the contrast to the general expectation, the models using the bending-resistant elements show the heavier weight than ones by the elements without bending stiffness. From this results, designers of multi-spar wing are recommended to construct the finite element model considering the bending stiffness, or to check the characteristics of the structure before modeling.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.73-74
• /
• 2009

Current buildings have complex shaped walls where the wing wall system is a popular option. When the wing wall is attached to a column, or a short span is produced due to the wing wall system, the system affects the behaviour of the column such as by increasing the strength and decreasing the ductility of the members. Calculations for internal shear force and internal bending moment of the vertical members are considered an important matter in design, but currently Korea does not have studies on the effects of the wing wall on the columns.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.237-237
• /
• 2019

현재 한반도에서는 대규모 하천정비가 지속적으로 진행되고 있다. 그 결과 하천은 평형상태를 맞추기 위하여 여러 가지 현상들이 발생하는데, 대표적인 현상 중 하나는 세굴현상이 있다. 이는 하천의 호안, 교각, 교대 등에 일어나 구조물의 안전성을 떨어뜨리고 큰 피해를 발생시킬 수 있다. 이러한 문제를 해결하기 위해서 설치 할 수 있는 구조물이 날개공이다. 본 연구에서는 곡선수로의 연속식, 흐름 방향의 운동방정식 및 와도 방정식을 수치모의기법을 통해서 날개공의 위치 및 개수, 크기, 각도, 간격 등에 따라 유속의 변화를 살펴보고 그에 따른 외안부근에서의 하상변화를 분석하였다. 분석 결과 날개공을 일정 간격별로 설치 하였을 때 개수에 따라 각각 날개공으로 인한 유속 및 수면유속의 감소가 크게 일어났고, 유속감소로 인해 하천의 횡단 방향하상 단면의 변화가 줄어들어 세굴현상이 감소되는 결과가 나왔다. 또한 날개공의 크기 및 모형에 따라서도 유속 및 수면 유속등의 큰 차이가 생겨 이에 따라 세굴 현상이 감소되는 결과가 나왔다. 본 연구 결과를 발전시켜 실제 하천에 적용할 수 있는 날개공 설치의 가이드라인을 제시한다면 현재 대규모하천정비에 따른 많은 문제점들을 해결할 수 있을 것이다.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.179-185
• /
• 2002

In this study, the structural design method for the modified long-endurance UAV is presented. Composite materials using room temperature curing method and wet lay up procedure is applied to all wing structures. The modified wing is composed of 3-piece component for improvement of ground handling. As the sandwich structure is efficient for light weight and high stiffness, all skin is used the sandwich consisting of glass/ epoxy fabric and balsa wood. The proof test is performed up to limit load corresponding to 4g load condition for the modified wing structure.

• Composites Research
• /
• v.30 no.1
• /
• pp.52-58
• /
• 2017

This paper presents the optimum design methodology for composite wing structure which automatically calculates the safety margin using optimization framework integrating failure modes. Particularly, its framework is possible to optimize sizing procedure to prevent failure mode which has the greatest effect on reducing the sizing time of composite structure. The main failure mode was set as the first ply failure, buckling failure mode, and bolted joint stress field, and the margin was calculated to minimize the weight. The design variable is a laminate sequence database and the responses are strain, buckling, bolted joint stress field. The objective function is the mass of the wing structure. The results of buckling analysis were compared using the finite element model to verify the robustness and reliability of Composite Optimizer.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.919-926
• /
• 2011

The fin of high speed air vehicle is composed of skins and strong skeletons. In the flutter analysis, the eigenmodes of a fin are used for evaluating the unsteady aerodynamic force and the modal approach is applied for solving the flutter equation in both time and frequency domain. Therefore, the proper eigenmodes used for a modal flutter analysis should be chosen. For the appropriate choice of eigenmodes, when there exist local modes of a skin in the high modes, the effects of those modes on the unsteady aerodynamic force and flutter characteristics are anlalyzed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.1-9
• /
• 1998

The exhaustion of fossil fuels and serious environmental pollution put the concern about non-po llution energy into the world. On the developments of technology, wind energy has been spotlighted as a non-pollution energy in many countries. This study has carried out the aerodynamic and structural design procedure of the lightweight composite rotor blades with an appropriate aerodynamic performance and structural strength for the 500㎾ medium class wind turbine system. The previous design, which is shell-spar structure, is redesigned to shell-spar- sandwich structure for light weight. Large deformation problem from light weight is examined by non-linear analysis. Local buckling occurred under lower stress than failure stress. The buckling analysis is accomplished to confirm the safety of the composite blade. The stress analysis around pin hole joint part at hub is carried out and it is confirmed that the pin hole is not failed. The results show that the resonance of redesigned blade does not happen in operation range.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.34-42
• /
• 2024

This study developed a morphing technology applicable to unmanned aerial vehicles (UAVs) with diverse flight characteristics. Existing morphing technologies require additional mechanisms and driving devices, posing challenges in constructing features such as ribs and spars within the wing structure, leading to structural instability. To address this, we developed a Variable-Camber and Variable-Chord (VCC) morphing flap that could maintains a continuously transforming surface during deformation, altering both camber shape and chord length simultaneously. Furthermore, we conducted design and fabrication of UAV wings incorporating these morphing flaps, ensuring structural stability by developing specialized shapes. Furthermore, structural experiments were conducted to simulate flight loads, followed by actual flight tests to validate performances of both morphing mechanism and wings. Finally, wind tunnel tests were conducted to compare results with aerodynamic analysis, confirming the effective applicability of this morphing technology.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.6
• /
• pp.471-478
• /
• 2018

Static tests of the composite wing structure were performed to verify damage tolerance design. Both 5 cases of DLLT and 3 cases of DULT were completed to meet requirements for static strength. After inducing BVID and open hole damages on the critical areas of the composite wing based on associated regulations, the DULT and fracture test were performed. In major wing parts, the measured strains and displacements agreed well with those of structural analysis. The initial structural fracture occurred at the area having minimum margin of safety as expected by analysis. As a result, it was confirmed that results from analytic model and strength evaluation were similar to behaviors of the composite wing structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.66-66
• /
• 2004

중량은 항공기의 성능을 좌우하는 주요 변수로써, 최소의 중량 달성이 100여 년 전 라이트 형제가 최초의 비행을 성공한 후, 항공기 개발자들의 주요 관심사였다. 일반 구조물의 최적화를 통한 설계는 구조물의 강도를 유지하면서 중량절감, 비용절감을 위해 널리 사용되고 있다. 하지만, 현재 항공기 구조물에 대해서는 아직 최적화론 통한 설계가 널리 적용되지 않고 있다. 그래서, 항공기에서는 중량절감을 위해 가벼우면서 강도를 큰 알루미늄이 주재료로 사용되고 있다.(중략)