• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1345-1352
• /
• 2012

This paper aims to evaluate the low-velocity impact responses and mechanical properties of balsa-wood and urethane-foam core materials and their sandwich panels, which are applied as the impact limiter of a nuclear spent fuel shipping cask. For the urethane-foam core, which is isotropic, tensile, compressive, and shear mechanical tests were conducted. For the balsa-wood core, which is orthotropic and shows different material properties in different orthogonal directions, nine mechanical properties were determined. The impact test specimens for the core material and their sandwich panel were subjected to low-velocity impact loads using an instrumented testing machine at impact energy levels of 1, 3, and 5 J. The experimental results showed that both the urethane-foam and the balsa-wood core except in the growth direction (z-direction) had a similar impact response for the energy absorbing capacity, contact force, and indentation. Furthermore, it was found that the urethane-foam core was suitable as an impact limiter material owing to its resistance to fire and low cost, and the balsa-wood core could also be strongly considered as an impact limiter material for a lightweight nuclear spent fuel shipping cask.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.52-60
• /
• 2005

In this study, low density polyethylene/organo-clay nanocomposites were prepared by melt blending. Thermal property, structure, and morphology of the LDPE/organo-clay nanocomposites were investigated. When the composition ratios of the compounds of LDPE/PE-g-MA/organo-clay were 90/10/1~10 (w/w/w), X-ray diffractograms of LDPE/organo-clay nanocomposites revealed that the intercalation of polymer chains lead to increase the spacing between clay layers. TEM microphotographs showed that LDPE was intercalated into organo-clay. TGA performed under air atmosphere demonstrated a great increase in thermal stability of the LDPE/organo-clay nanocomposties. The maximum decomposition temperature of LDPE/organo-clay nanocomposite was increased about $80^{\circ}C$ compared with pure LDPE. When the organo-clay contents were 1.0~5.0 wt%, the LOI values were increased with increasing the organo-clay content, but in the case of the contents more than 5.0 wt%, the LOI values were not increased any more.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.267-273
• /
• 2006

We have prepared PP/Ba-ferrite composite fabrics by a melt-blown spinning method and investigated the relationship between the properties of PP/Ba-ferrite composite fabrics and melt-blown processing factors. A PP composite containing Ba-ferrite as a magnetic particulate filler was prepared in the form of pellet from PP resin and Ba-ferrite powder by melt compounding using a single extruder. Screw turning force (rpm), DCD (die-to-collector distance), and Ba-ferrite content were changed. We measured diameters of fiber, mechanical, thermal, and magnetic properties for the composited PP fabrics. The elongation was increased and a fiber diameter and tensile strength were decreased as the spinning distance increased or screw turning force decreased. The crystallinity was increased with increasing spinning distance according to XRD. It was assumed that the orientation of crystalline domain in the neat PP without ferrite was increased by drawing in mechanical direction, however, the orientation in the PP composite was decreased according to XRD analysis. We measured a magnetic property of PP nonwoven fabric containing Ba-ferrite powder. A coercive force, maximum magnetization, and residual magnetization are reduced with the spinning distance. According to the result of TGA measurement, the heat resistance was increased with the Ba-ferrite powder content and with decreasing the spinning distance.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.355-363
• /
• 2012

A series of poly(hydroxyamide)s (PHAs) having trifluoromethyl group were prepared by direct polycondensation of aromatic diimide-dicarboxylic acids with 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane by thionyl chloride and triethyl amine in N-methyl-2-pyrrolidinone (NMP). The PHAs exhibited inherent viscosity in the range of 0.54-0.96 dL/g at $35^{\circ}C$ in DMAc solution. All PHAs were readily soluble in a variety of organic solvents, whereas the polybenzoxazoles (PBOs) were quite insoluble except partially soluble in sulfuric acid. PHAs were converted to PBOs by thermal cycling reaction with heat of endotherm. The maximum weight loss temperature of the PHAs occurred in the range of $559-567^{\circ}C$. The PBOs showed relatively high char yields in the range of 47-59%. Pyrolysis Combustion Flow Calorimeter (PCFC) results of the PBOs showed 12-19 W/g heat release rate (HRR), and 2.7-3.6 kJ/g total heat release (total HR). The HRR of PBO 1 showed the lowest value of 12 W/g, which was 37% lower than that of PBO 3 (19 W/g).

• Korean Journal of Environmental Biology
• /
• v.36 no.3
• /
• pp.385-391
• /
• 2018

Toxic assessment of PBDEs (BDE-47, BDE-209) has carried out using the rates of population growth in marine phytoplankton, Skeletonema costatum. The population growth rate (r) in S. costatum was determined after 96 hours of exposure to BDE-47 (2,2'4,4'-Tetrabromodiphenyl ether) and BDE-209 (2,2', 4,4'-Decabromodiphenyl ether). It was observed that r-value in the controls (absence PBDEs) was greater than 0.04 and further a decrease was observed in a dose-dependent manner. BDE-47 reduced population growth rate in a dose-dependent manner and a significant reduction occurred at a concentration greater than $0.31mgL^{-1}$, but BDE-209 had no effect on population growth rate even at concentrations greater than $125mgL^{-1}$. The population growth rate in the presence of BDE-47 and BDE-209, $EC_{50}$ values were $0.55mgL^{-1}$ and >$125mgL^{-1}$, and NOEC values were $0.16mgL^{-1}$ and >$125mgL^{-1}$, respectively. Therefore, BDE-47 is considered to be about over 80 times more harmful than BDE-209. In this study, the ecotoxic assessment based on population growth rate in S. costatum can be used as a baseline data for establishment of environment standard quality of BDE-47 and BDE-209 in the marine environment.

• Korean Journal of Environmental Biology
• /
• v.36 no.1
• /
• pp.43-49
• /
• 2018

The toxic assessment of the PBDEs (BDE-47, BDE-209) has been comprehensively investigated by using the rates of survival and population growth in the marine rotifer, Brachionus plicatilis. Chiefly, the survival rate was determined after a measurement of 24 hours of exposure to the BDE-47 (2,2'4,4'-Tetrabromodiphenyl ether) and the BDE-209 (2,2',4,4'-Decabromodiphenyl ether) was performed. The BDE-47 reduced survival rate in dose-dependent manner and a significant reduction were noted to have occurred at a concentration of greater than $3.9mg\;L^{-1}$, but the BDE-209 had no effect which was subsequently observed in this study. The population growth rate (r) was determined after 72 hours of exposure to toxicants in the study. It was observed that the r value in the controls (absence PBDEs) was greater than 0.5, and that it decreased as the dose-dependent manner as recorded. The survival rate when exposed to BDE-47 and BDE-209, $EC_{50}$ value was $13mg\;L^{-1}$ and $>1,000mg\;L^{-1}$, and population growth rate was $3.67mg\;L^{-1}$ and $862.75mg\;L^{-1}$, respectively. Therefore, the BDE-47 is considered to be 76-235 times more harmful than the BDE-209 as noted. In this study, the ecotoxicological bioassay using a noted survival rate and population growth rate of B. plicatilis can be used as a baseline data for the continued establishment of the environmental quality standard of the incidences of the BDE-47 and BDE-209 in a marine environment.