• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.253-262
• /
• 2006

The present paper presents a direct numerical simulation of turbulent flows in a compound open-channel. Mean flows and turbulence structures are provided, and they are compared with the numerical data and measured data available in the literature. The simulated results show that twin vortices are generated near the juncture of the main channel and the floodplain and their maximum magnitude is about 5% of bulk streamwise velocity. At the juncture, the simulated wall shear stress becomes the maximum unlike the experimental data. A quadrant analysis shows that both sweeps and ejections become the main contributor to production of Reynolds shear stresses. A conditional quadrant analysis reveals that the directional tendency of dominant coherent structures determines the production of Reynolds shear stress and the pattern of twin vortices.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.905-910
• /
• 2013

The flow analysis has been made by applying the turbulent models in the helically coiled tubes of heat transfer. The k-${\varepsilon}$ and Spalart-Allmaras turbulent models are used in which the structured grid is applied for the simulation. The velocity vector, the pressure contour, the change of residuals along the iteration number and the friction factors are simulated by solving the Navier-Stokes equations to make clear the Reynolds number effect. The helical tube increases the centrifugal forces by which the wall shear stress become larger on the outer side of the tube. The centrifugal force makes the heat transfer rate locally larger due to the increase of the flow energy, which finds out the close relationship between the pressure drop and friction factor in the internal flow. The present numerical results are compared with others, for example, in the value of friction factor for validation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2297-2307
• /
• 1995

An experimental study on the structure of a separated shear layer downstream of the backward-facing step has been performed by examining mean flow and turbulent quantities in terms of free stream turbulence. When free stream turbulence exists, the entrainment rate of the separated shear layer and the flow rate in the recirculation region are enhanced, resulting in shorter reattachment length. The production and diffusion terms in the turbulent kinetic energy balance are shown to increase more than the dissipation term does. Rapid decrease of the pressure-strain term in the shear stress balance implies the enhancement of the three-dimensional motion by free stream turbulence.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.381-385
• /
• 2004

본 인구에서는 레이놀즈응력모형을 이용하여 직사각형 개수로 흐름을 수치모의 하고 이차흐름의 생성 메커니즘을 제시하였다. 수치모의 결과 자유수면과 측벽의 접합부 근처에서 inner secondary flow가 발생하였다. 이는 최근 Grega 등(1995)과 Hsu 등(2000)에 의해 밝혀진 새로운 이차흐름이다. 또한 측벽에서의 전단력 분포를 계산한 결과 inner secondary flow에 의하여 수면 근처에서의 전단력 값이 증가하는 것으로 나타났다. 계산된 결과를 이용하여 와도 방정식에서 각 항의 크기를 비교하여 이차 흐름의 생성 메커니즘을 살펴보았다. 그 결과 벽 및 측벽 경계 부근에서는 난류의 비등방성에 의한 와도 생성항에 의해 이차 흐름이 생성되고, 경계와 멀리 떨어진 영역에서는 레이놀즈응력에 의한 와도 생성항이 이차흐름을 생성시키는데 중요한 역할을 하는 것으로 나타났다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.357-368
• /
• 1993

With the assumption of the diffusion dominated flow, a numerical model has been developed for undertow and turbulence structure under the breaking wave by using the $textsc{k}$-$\varepsilon$ turbulence model. Undertow is a strong mean current which moves seqwards below the level of wave trough in the surf zone. The turbulence, generated by wave breaking in the roller, spreads and dissipates downwards. The governing equations are composed of the equation of motion with the period-averaged shear stress due to waves; $textsc{k}$- and $\varepsilon$-equations with the turbulence energy Production due to wave breaking. They are discretised by the three-level fully implicit scheme, which can be solved by using Thomas algorithm. The model gives good agreements with measurements except for the station that is closest to the breaking point.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.281-281
• /
• 2022

바닥에서 생성되는 난류는 순간적으로 강한 모멘텀을 바닥에 전달함과 동시에 바닥에 있는 입자를 움직이게 한다. 경계층 내 난류 운동에 대한 분석은 다양한 유사 이송 문제를 이해하기 위해 필수적이며 이에 따라 많은 선행 연구들은 실험실 실험을 통해 해당 연구를 수행하였다. 본 연구에서는 선행 연구에서 사용하지 못했던 진보된 실험 방법을 활용하여 바닥 경계층 내의 난류 운동에 대해 확인하고 해당 운동에 의해 관성 입자의 움직임이 어떻게 발생하는지에 대하여 물리적으로 설명하고자 한다. 다양한 흐름 조건에서 3가지의 입경 크기를 가지는 모래 입자를 가지고 실험을 수행하였으며, 실험 조건별 고해상도 유속장 및 관성 입자의 움직임은 3차원 입자 영상 유속계 (Particle Image Velocimetry; 이하 PIV)와 입자 추적 유속계 (Particle Tracking Velocimetry; 이하 PTV)를 동시에 적용하여 파악하였다. 취득된 3차원 유속장과 입자 궤적을 기반으로 실험 조건별 흐름 및 입자 거동 특성에 대해 분석하였으며, 관성 입자의 움직임을 발생시키는 3차원 난류 운동은 측정된 유속장에서 산정한 Q-criterion 값을 기반으로 도식화하였다. 측정값 내에는 난류 운동에 대한 정보와 더불어 잡음이 포함되어 있으므로 이를 제거하고자 적합 직교 분해 (Proper Orthogonal Decomposition; 이하 POD) 방법을 적용하였다. 그리고 POD로 추출한 유속장을 통해 바닥면 부근에 존재하는 헤어핀 와류 운동 혹은 와류 묶음과 같은 난류 고유 구조를 파악하였다. 해당 와류 운동들의 3차원 난류 특성을 확인하고자 비등방성 불변 지도(anisotropy invariant map)를 활용하였으며 경계층 내부에서 난류의 형태가 흐름 방향으로 늘어진 럭비공 형태임을 확인하였다. 마지막으로, 입자의 움직임을 발생시키는 난류 이벤트를 결정하고자 사방구 분석 (Quadrant analysis) 기법을 적용하였으며 흐름 조건별로 입자를 움직이게 하는 난류 이벤트는 달라짐을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.139-144
• /
• 2006

Using DNS data for turbulent flows in an open-channel with sidewalls, the mechanisms by which secondary flows are generated and by which Reynolds shear stresses are created, are demonstrated. Near the sidewall, secondary flows invading towards the sidewall are observed in the regions of both lower and upper corners, while secondary flows ejecting from the sidewall towards the center of the channel are created elsewhere. The distributions of Reynolds shear stresses near the sidewall are analyzed, connecting their productions with coherent structures. A quadrant analysis shows that sweeps are dominant in two corner regions where secondary flows invading towards the sidewall are generated, but that ejections are dominant in the region where secondary flows ejecting towards the center of the channel are created. Also, conditional quadrant analyses reveal that the productions of Reynolds shear stresses and the patterns of secondary flows are determined by the directional tendencies of coherent structures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.403-413
• /
• 1985

Hot-wire measurements of second and third-order mean products of velocity fluctuations have been made in the separated, reattached, and redeveloping boundary layer behind a vertical fence. Mean velocity, wall static pressure distributions have also been measured in the whole flow field. Upstream of the reattachment point, the separated shear layer developes as a free mixing layer, but the gradient of the maximum slope thickness, turbulent intensities and the Reynolds shear stress are higher than that of the mixing layer due to initial streamline curvature and the effects of highly turbulent recirculating flow region. In the reattachment region, Reynolds shear stress and triple products near the surface is far more rapid than the decrease of the shear stress; that is the presence of the solid wall has a marked effect on the apparent gradient diffusivity of intensity or shear stress and throws doubts upon the usefulness of the simple gradient diffusivity model in this region.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.179-189
• /
• 2010

This paper presents a numerical investigation of vorticity generation in fully vegetated open-channel flows. The Reynolds stress model is used for the turbulence closure. Open-channel flows with rough bed-smooth sidewalls and smooth bed-rough sidewalls are simulated. The computed vectors show that in channel flows with rough bed and rough sidewalls, the free-surface secondary currents become relatively smaller and larger, respectively, compared with that of plain channel flows. Also, open-channel flows over vegetation are simulated. The computed bottom vortex occupies the entire water depth, while the free-surface vortex is reduced. The contours of turbulent anisotropy and Reynolds stress are presented with different density of vegetation. The budget analysis of vorticity equation is carried out to investigate the generation mechanism of secondary currents. The results of the budget analysis show that in plain open-channel flow, the production by anisotropy is important in the vicinity of the wall and free-surface boundaries, and the production by Reynolds stress is important in the region away from the boundaries. However, this rule is not effective in vegetated channel flows. Also, in plain channel flows, the vorticity is generated mainly in the vicinity of the free-surface and the bottom, while in vegetated channel flows, the regions of the bottom and vegetation height are important to generate the vorticity.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.380-385
• /
• 2001

In the present study, flow characteristics of turbulent oscillatory flow in a square-sectional $180^{\circ}$ curved duct are investigated experimentally. In order to measure wall shear stress and pressure distributions, experimental studies for air flow are conducted in a square-sectional $180^{\circ}$ curved duct by using the LDV system with the data acquisition and the processing system. The wall shear stress measuring point bend angle of the $150^{\circ}$ and pressure distribution of the inlet (${\phi}=0^{\circ}$) to the outlet (${\phi}=180^{\circ}$) at $10^{\circ}$ intervals of the duct. The results obtained from the experimentation are summarized as follows: A wall shear stress value in an inner wall is larger than that in an outer wall, except for the phase angle (${\omega}t/{\pi}/6$) of 3, because of the intensity of secondary flow. The pressure distributions are the largest in accelerating and decelerating regions at the bend angle(${\phi}$) of $90^{\circ}$ and pressure difference of inner and outer walls is the largest before and after the ${\phi}=90^{\circ}$.