• Korean Journal of Materials Research
• /
• v.27 no.8
• /
• pp.445-450
• /
• 2017

YSZ (Yttria-stabilized zirconia) is a ceramic material that is used for electronic and structural materials due to its excellent mechanical properties and specific electrical characteristics according to the Yttrium addition. Hydrothermal synthesis has several advantages such as fine particle size, uniform crystalline phase, fast reaction time, low process temperature and good dispersion condition. In order to synthesize YSZ nanoparticles with high crystallinity, hydrothermal synthesis was performed at various concentrations of NaOH. The hydrothermal process was held at a low temperature ($100^{\circ}C$), with a short process time (2,4,8 hours); the acidity or alkalinity of solution was controlled in a range of pH 2~12 by addition of NaOH. The optimum condition was found to be pH 12, at which high solubility levels of Y(OH) and Zr(OH) were reported. The synthesized nano powder showed high crystallinity and homogenous composition, and uniform particle size of about 10 nm.

• Korean Journal of Materials Research
• /
• v.24 no.11
• /
• pp.578-584
• /
• 2014

To synthesize Sn nanoparticles (NPs) less than 30 nm in diameter, a modified polyol process was conducted at room temperature using a reducing agent, and the effects of different pH values of the initial solutions on the morphology and size of the synthesized Sn NPs were analyzed. tin(II) 2-ethylhexanoate, diethylene glycol, sodium borohydride, polyvinyl pyrrolidone (PVP), and sodium hydroxide were used as a precursor, reaction medium, reducing agent, capping agent, and pH adjusting agent, respectively. It was found by transmission electron microscopy that the morphology of the synthesized Sn NPs varied according to the pH of the initial solution. Moreover, while the size decreased to 11.32 nm with an increase up to 11.66 of the pH value, the size increased rapidly to 39.25 nm with an increase to 12.69. The pH increase up to 11.66 dominantly promoted generation of electrons and increased the amount of initial nucleation in the solution, finally inducing the reduced-size of the Sn particles. However, the additional increase of pH dominantly induced a decrease of PVP by neutralization, which resulted in acceleration of the agglomeration by collisions between particles.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.711-714
• /
• 2015

In this paper, high quality AlN layers were regrown on AlN nanopillar structure with $SiO_2$-dots by HVPE. Surface morphology of AlN layer regrown exhibited flatter than a conventional AlN template. The laterally overgrown AlN regions would consist of a continuous well coalesced layer with lower dislocation density than in the template because of the dislocation blocking and dislocation bending effects. Moreover, result of Raman spectroscopy suggest that the AlN nanopillar structure with $SiO_2$-dots relieves the strain in the AlN layer regrown by HVPE.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05a
• /
• pp.6-10
• /
• 2001

We synthesized polypyrrole (PPy) nanotubules by oxidative polymerization of the pyrrole monomer on the pore of a polycarbonate membrane. The electrochemical behavior was investigated using cyclic voltammetry and AC impedance. The redox potential was about -0.5 V vs. Ag/AgCl reference electrode, while the potential was about 0 V for electro-synthesized PPy film. It is considered as the backbone grows according to the pore wall. Therefore, it is possible to be arranged regularly. That leads to improvement in the electron hopping. The AC impedance plot gave a hint of betterment of mass transport. PPy nanotubules have improved in mass transport, or diffusion. That is because the diffusion occurs through a thin pore wall of PPy nanotubules. The kinetic parameter of PPy nanotubules enzyme electrode with glucose solution was evaluated. The formal Michaelis constant and maximum current calculated by computer were about 23.8 mmol $dm^{-3}$ and $440\;{\mu}A$ respectively. Obviously, an affinity for the substrate and current response of the PPy nanotubules enzyme electrode are rather good, comparing with that of PPy film. What is more, the enzyme electrode is sensitive to blood sugar of a diabetic serum despite an obstruction of ascorbic acid, oxygen, some protein and/or hormone.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.413-413
• /
• 2009

Silicon nanowires (Si NWs)-based top-gate field-effect transistors (FETs) are constructed by using Si NWs transferred onto flexible plastic substrates. Si NWs are obtained from the silicon wafers using photolithography and anisotropic etching process, and transferred onto flexible plastic substrates. To evaluate the electrical performance of the silicon nanowires, we examined the output and transfer characteristics of a top-gate field-effect transistor with a channel composed of a silicon nanowire selected from the nanowires on the plastic substrate. From these FETs, a field-effect mobility and transconductance are evaluated to be $47\;cm^2/Vs$ and 272 nS, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.424-424
• /
• 2009

그라핀은 밴드갭이 없어서 세미메탈의 성질을 띠므로 초고속 RF 소자에는 응용이 가능하지만, 현재 사용되는 반도체 칩에 사용하기가 불가능하다. 그러나 그라핀을 매우 좁은 리본 형태로 만들 경우 밴드갭이 생기고 이에 따라 반도체특성을 뛰게 된다. 이러한 특성은 시뮬레이션을 통해서만 이해되다가 2007년 P. Kim이 그라핀 나노리본의 밴드캡이 리본의 폭이 좁아짐에 따라 증가함을 실험적으로 최초로 발표하였다. 하지만 그라핀을 나노리본형태로 식각 방법에 대해서는 정확히 연구되지 않았다. 따라서 본 연구에서는 $O_2$ plasma ashing 방법을 이용하여 그라핀을 식각하는 방법에 대해 연구하였다. 먼저 Si기판을 initial cleaning 한 후, highly-oriented pyrolytic graphite(HOPG)를 이용하여 기존의 mechanical exfoliation 방식을 통해 그라핀을 형성하였다. Photo-lithography 방법을 통하여 패터닝한 후, 그라핀을 식각하기 위하여 Reactive Ion Etcher (RIE) system을 이용한 $O_2$ plasma ashing을 50 W에서 1 분간 실시하였다. 다시 image reverse photo-lithography 과정과 E-beam evaporator system를 통해서 Al 전극을 형성하여 graphene-FET를 제작하였고, 광학 현미경과 AFM (Atomic force microscope)을 통해 두께를 확인하였다. 본 연구를 통하여 $O_2$ plasma ashing을 이용하여 쉽게 그라 E을 식각할 수 있음을 확인 하였으며, 제작된 소자의 전기적 특성에 대해서 현재 실험중에 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.376-377
• /
• 2009

In the study the affect of $SiO_$ depending on the characteristics of break-down, we have experimented the break-down for the $SiO_$ and variable temperature change after mading nano $SiO_$ of the diameter 12 [nm] at the epoxy resin. As the experimental results, we have continued that the break-down strength is increased at the adding change but the break-down strength is decreased again as the 0.4 [wt%] standard. Also, the break-down voltage is not changed at 25, 50 [$^{\circ}C$] as the temperate change. But break-down voltage is largely changed when temperate is rising up.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.375-375
• /
• 2009

For many large-scale applications of high-temperature superconducting materials, large critical current density($J_c$) in high applied magnetic fields are required. A number of methods have been reported to introduce artificial pinning centers(APCs) in $YBa_2Cu_3O_{7-\delta}$(YBCO) films for enhancement of their $J_c$. We report measurements of critical current in $YBa_2Cu_3O_{7-\delta}$ films deposited by PLD on $SrTiO_3$ substrates decorated with Au nanoparticles. Au nanoparticles were synthesized on STO substrates with self assembled monolayer. Microstructural analysis of the obtained YBCO films was performed by using cross-section transmission electron microscopy(TEM). Phase and textural analysis was done using X-ray diffraction. The surface morphology and surface roughness(Ra) of the layers was measured by atomic force microscopy(AFM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.45-45
• /
• 2009

우리는 ZnO Template를 사용한 열기상법을 이용하여 수직 배양한 ZnO nanorods와 ZnO Nanopencils를 성장하였고, Dependency temperature Photoluminescence(PL)의 분석을 통하여 광학적 특성에 대해 분석을 하였다. ZnO 나노구조는 100K 이하의 온도에서 donor-bound exciton가 dominant하고, 100K 이상의 온도에서는 free exciton과 그들의 phonon-replica emission이 dominant한 것을 알 수 있었다. 하지만, ZnO nanorods와 nanopencils은 다른 exciton-phonon coupling의 strength에 의한 surface defects에 의해 excitonic emissions의 다른 거동을 보이는 것을 알았다. 이것으로 인해 상온 PL에서 ZnO nanopencil은 nanorods에 비해 52meV의 red shift를 보였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.248-248
• /
• 2009

Recently, the control of size, morphology and dimensionality in inorganic materials has been rapidly developed into a promising field in materials chemistry. 3D nanostructured flower-like ZnO architecture with different size and shapes have been simply synthesized via a hydrothermal process, using zinc acetate and ammonium hydroxide as reactants.[1] In this study, the Zno thin-films were deposited by RF magnetron sputtering in other to get high adhesion and uniformity of 3D nanostructured flower-like ZnO architecture on a $SiO_2$ substrate. The XRD patterns identified that the obtained the nanocrystallized ZnO architecture exhibited a wurtzite structure. SEM images illustrated that the flower-like ZnO bundles consisted of flower-like or chestnut bur, which were characterized by polycrystalline and [0001] preferential orientation.