• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.1001-1005
• /
• 2004

Rye-sensitized solar cell (DSSC) is a new class of solar cell, which consists of nanoporous TiO$_2$ electrode, dye-sensitizer, electrolyte, and counter electrode. Such cell is operated in sunlight via the principle of photosynthetic electrochemistry. In order to obtain the good dispersion of nano size TiO$_2$ particles In slurry, the pH of solvent, the sort and quantify of solvent additive and the quantity of surfactant were adjusted. As results, the lower the pH of solvent was the lower the viscosity of the slurry became. The addition of ethylene glycol and propylene glycol to dilute HNO$_3$ brought about the lowering of viscosity and the enhancement of stability in slurry. The addition of surfactant lowered the viscosity of slurry. It was possible to obtain the homogeneous and uniformly dispersed mesoporous TiO$_2$ film using the dilute HNO$_3$ solvent of pH 2 with the addition of ethylene glycol and neutral surfactant. DSSC was assembled with TiO$_2$ electrode and Pt electrode, and its photoelectric property was measured using the monochromatic wavelength in the rangee of 350∼700 nm.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.1
• /
• pp.1-7
• /
• 2012

Multi-walled carbon nanotube (MWCNT) aluminum composite powders were deposited to form coatings using a high velocity oxygen fuel (HVOF) spraying process. High thermal energy and contact with atmospheric oxygen were supplied as the MWCNT aluminum composite particles were exposed to a gas flow field at high temperature (${\sim}3.0{\times}10^3$ K) during HVOF spraying. As a result, the particles underwent full or partial melting and rapid solidification due to the high thermal energy, and the exposure to oxygen induced the interfacial reaction of MWCNTs within the particle. The electrical and mechanical properties of MWCNT aluminum composite coatings were evaluated based on microstructure analysis. Electrical resistivity, elastic modulus, and micro-hardness, of the MWCNT aluminum composite coatings were higher than those of pure aluminum coating. The contribution of MWCNTs to the aluminum matrix can be attributed to their high electrical conductivity, dispersion hardening and anchoring effects. The relationship among the properties and the interaction of the MWCNTs with the aluminum matrix is discussed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.86-86
• /
• 2017

고효율의 에너지 변환 및 친환경적인 이점들을 이유로, 고분자전해질 연료전지(PEMFC)는 차세대 에너지 장치로 이목을 끌어왔다. 반면, 값비싼 백금 촉매의 이용은 연료전지의 상업적 이용에 주요한 결점으로 작용했다. 최근, Zelenay와 연구팀은 폴리아닐린-철-탄소 복합체구조에서 산소환원활성이 백금과 견주어 비슷한 성능을 낼 수 있음을 보고 하였다. Dodelet은 이러한 높은 성능이 전이금속의 영향에 의한 것일 수 있다는 주장을 하였다. 본 연구팀은 지난 연구에서 제일원리전산모사를 통해 니켈, 코발트, 구리등과 같은 전이금속이 질소가 도핑된 탄소 그래핀층에 미치는 거동을 밝혔다. 결론적으로, 금속들은 질소가 도핑된 그래핀의 전자구조를 바꿀 수 있고, 이러한 전자구조의 변화는 산소 환원반응에서 긍정적으로 작용할 수 있음을 확인하였다. 이러한 이론적 연구에 기반하여, 탄소층으로 감싼 금속은 내구성과 활성을 동시에 보유한 향후 전망있는 촉매 물질로 예상되어진다. 특히, 질소가 도핑된 탄소층으로 코팅된 철-코발트 합금은 계산을 통해 산소환원반응에서 우수할 것으로 예측되었다. 본 연구팀은 FeCo@N-C 나노입자를 직접 합성하였고, 이 촉매의 우수한 활성을 전기화학적, 구조적 관점에서 1) 질소의 도핑 효과, 2) 탄소의 두께 효과, 3) 합금효과에 집중하여 분석하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.3
• /
• pp.263-270
• /
• 2016

Recent Engineered nanoparticles were increasingly exposed to environmental system with the wide application and production of nanomaterials, concerns are increasing about their environmental risk to soil and groundwater system. In order to assess the transport behavior of silver nanoparticles (AgNPs), a saturated packed column experiments were examined. Inductively coupled plasma-mass spectrometry and a DLS detector was used for concentration and size measurement of AgNPs. The column experiment results showed that solution chemistry had a considerable temporal deposition of AgNPs on the porous media of solid glass beads. In column experiment, comparable mobility improvement of AgNPs were observed by changing solution chemistry conditions from salts (in both NaCl and $CaCl_2$ solutions) to DI conditions, but in much lower ionic strength (IS) with $CaCl_2$. Additionally, the fitted parameters with two-site kinetic attachment model form the experimental breakthrough curves (BTCs) were associated that the retention rates of the AgNPs aggregates were enhanced with increasing IS under both NaCl and $CaCl_2$ solutions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.469-469
• /
• 2012

유기발광소자는 빠른 응답속도, 넓은 시야각, 얇은 두께의 특성으로 차세대 디스플레이 소자 기술로 많은 주목을 받고 있다. 백색 조명 광원 관련 기술은 친환경 에너지와 관련하여 연구가 활발하게 진행되고 있다. 청색과 황색의 유기물층을 적층하여 제작한 백색 유기발광소자는 서로 다른 두 유기물질의 계면 불균일로 인한 효율 저하와 형광 여기자의 수명과 유기물의 두께 상관관계에 따라 색안정성이 나빠지는 문제점이 있다. 본 연구에서는 고분자 poly (2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylenevinylene (MEH-PPV)와 polystyrene (PS) 혼합물을 스핀코팅 방법을 사용하여 박막을 형성한 후 열처리에 의한 상분리 현상을 이용하여 선택적으로 PS 물질을 제거하여 MEH-PPV 황색 고분자 발광층을 형성하여 황색 고분자 발광층의 표면 성질 변화를 관찰하였다. 고분자 MEH-PPV와 PS의 혼합 비율과 혼합층 두께에 따른 MEH-PPV 황색 고분자 박막의 변화를 원자힘 현미경을 통하여 관찰할 수 있었다. MEH-PPV 황색 고분자 발광층의 표면 특성은 MEH-PPV와 PS 혼합물의 PS 혼합비가 높아지면 표면거칠기가 작아지며, 혼합된 두 고분자 물질의 분자량의 차이에 의한 응집도의 차이로 인하여 MEH-PPV와 PS 혼합물 박막의 두께가 얇아지면 표면거칠기가 커진다. 이 연구 결과는 고분자-저분자 혼합 발광층 구조를 사용하는 백색 유기발광소자의 효율 향상에 대한 기초자료로 활용할 수 있다.

• Membrane Journal
• /
• v.28 no.3
• /
• pp.143-156
• /
• 2018

In this review article, hybrid water/wastewater treatment processes of membrane and photocatalyst were summarized from papers published in various journals. It included (1) membrane photoreactor (MPR), (2) fouling control of a membrane coupled photocatalytic process, (3) photocatalytic membrane reactors for degradation of organic pollutants, (4) integration of photocatalysis with membrane processes for purification of water, (5) hybrid photocatalysis and ceramic membrane filtration process for humic acid degradation, (6) effect of $TiO_2$ nanoparticles on fouling mitigation of ultrafiltration membranes for activated sludge filtration, (7) hybrid photocatalysis/submerged microfiltration membrane system for drinking water treatment, (8) purification of bilge water by hybrid ultrafiltration and photocatalytic processes, and (9) Hybrid water treatment process of membrane and photocatalyst-coated polypropylene bead.

• Journal of Powder Materials
• /
• v.23 no.4
• /
• pp.317-324
• /
• 2016

Tin is one of the most promising anode materials for next-generation lithium-ion batteries with a high energy density. However, the commercialization of tin-based anodes is still hindered due to the large volume change (over 260%) upon lithiation/delithiation cycling. To solve the problem, many efforts have been focused on enhancing structural stability of tin particles in electrodes. In this work, we synthesize tin nano-powders with an amorphous carbon layer on the surface and surroundings of the powder by electrical wire explosion in alcohol-based liquid media at room temperature. The morphology and microstructures of the powders are characterized by scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and transmission electron microscopy. The electrochemical properties of the powder for use as an anode material for lithium-ion battery are evaluated by cyclic voltammetry and a galvanometric discharge-charge method. It is shown that the carbon-coated tin nano-powders prepared in hexanol media exhibit a high initial charge specific capacity of 902 mAh/g and a high capacity retention of 89% after 50 cycles.

• Journal of Powder Materials
• /
• v.14 no.2 s.61
• /
• pp.145-149
• /
• 2007

Nanocrystalline transient aluminas (${\gamma}$-alumina) were coated on core particles (${\gamma}$-alumina) by a carbonate precipitation and thermal-assisted combustion, which is environmentally friend. The ammonium aluminum carbonate hydroxide (AACH) as a precursor for coating of transient aluminas was produced from precipitation reaction of ammonium aluminum sulfate and ammonium hydrogen carbonate. The crystalline size and morphology of the synthetic, AACH, were greatly dependent on pH and temperature. AACH with a size of 5 nm was coated on the core alumina particle at pH 9. whereas rod shape and large agglomerates were coated at pH 8 and 11, respectively. The AACH was tightly bonded coated on the core particle due to formation of surface complexes by the adsorption of carbonates, hydroxyl and ammonia groups on the surface of the core alumina powder. The synthetic precursor successfully converted to amorphous- and ${\gamma}$-alumina phase at low temperature through decomposition of surface complexes and thermal-assisted phase transformation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.97.2-97.2
• /
• 2018

This study formed a hard TiAlSiWN coating layer using Ti, Al, Si and W raw powders that were mechanically alloyed and refined. The TiAlSi and TiAlSiW coating targets were fabricated using a single PCAS process in a short time with the optimal sintering conditions. The coating targets were deposited on the WC substrate by forming coating layers using TiAlSiN and TiAlSiWN nitride nano-composite structures with an AIP process. The properties of the nitride nano-composite coating layers were compared according to the addition of W. The microstructure of the nitride nano-composite coating layer was analyzed, focusing on the distribution of the crystalline phases, amorphous phases ($Si_3N_4$), and growth orientation of the columnar crystal depending on the addition of W. The mechanical properties of the coating layers were exhibited a hardness of approximately $3,000kg/mm^2$ and adhesion of about 117.77N in the TiAlSiN. In particular, the TiAlSiWN showed excellent properties with a hardness of more than $4,300kg/mm^2$ and an adhesion of about 181.47N.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.131-138
• /
• 2017

Most of high performance fabrics for the car racing protective clothing have been developed to have thermal resistance, flame retardant property, impact resistance and anti-frictional properties to protect the racer from the crucial accident. In this study, the meta-aramid fabric, which has inherent flame retardant, was coated with nanoparticles of SiC to enhance the impact resistance and anti-friction properties. Uniform coating of the nanoparticles onto the fabrics was obtained by using tape casting method. As the experimental parameters, size and content of the SiC nanoparticle were varied with the coating conditions of the fabric surface. The effects of the nanoparticle coating on the properties of meta-aramid fabric were examined with various instrumental analyses such as SEM, tensile strength and abrasion test.