• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.159-159
• /
• 2004

금속 박막 위의 알칸티올분자의 흡착에 의한 자기조립단분자막(Self-Assembled Monolayers)은 접착 방지, 마찰 저하 등의 기능을 가진 코팅층으로서의 응용과 분자 또는 생분자의 미세 구조물 형성을 위한 방법으로 널리 연구되어지고 있다. 이러한 연구 중에서 특히 자기조립단분자막의 매우 얇은 두께와 금속 박막의 선택적 식각을 위한 안정적인 리지스트(Photo Resist)로서의 특징을 활용한 극미세 패터닝에 대한 연구가 활발히 진행되고 있다.(중략)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.156-156
• /
• 2004

정보화 및 휴대화 시대에 있어서 폭증하는 정보량을 보다 작은 용기에, 보다 많이 그리고 보다 저렴하게 저장하기 위해서는, 기존 저장기기의 한계를 극복할 수 있는 새로운 개념의 차세대 정보 저장기기가 요구되어 진다. 나노미터 사이즈의 주사탐침이 기록매체표면에 근접하여 정보를 기록/재생하는 PSD는 상기한 저장기기의 대용량화, 소형화, 그리고 저가격화를 충족시킬 수 있는 신개념의 저장기기로, 그 기술적 근간을 SPM(Scanning Probe Microscope)기술과 MEMS(Micro Electro Mechanical Systems) 제작기술에 두고 있다.(중략)

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.40-45
• /
• 2003

Optical and electronic industries are using lapping and polishing processing as a final finish rather than grinding, because they need more accurate parts of brittles non-metallic materials such as single crystals. Sapphire has been ground by the ultra-precision surface grinder having a glass -ceramic spindle of extremely-low thermal expansion with various cup-type resinoid-bonded diamond wheels of #400-#3000 in grain size. Sapphire can be ground in the ductile mode. And also, the surface roughness and grinding conditions has been clarified. The smooth surface of Sapphire less than 1nm RMS, 1nm Ra can be obtained by the ultra-precision grinding without any polishing process.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.39-46
• /
• 2010

Linear induction motor is adopted as an actuator of the planar stage. An inherently poor characteristic at zero or ultra-low speed zone of the induction motor is remarkably improved due to a recent development of power electronic semiconductor technology and a spatial vector control theory. At present, a servo response speed of the induction motor reaches 90 percent of one of PM synchronous or BLDC motor. Specially, as a secondary of the induction motor can be constructed using uniform conducting sheets, there is no periodic force ripple as in PM motors. So, the induction motor can be superior to another driving means under a certain condition. This paper discusses the overall development procedure of non-contact planar stage with a big workspace using linear induction motors.

• 한국정밀공학회지
• /
• 제25권6호
• /
• pp.150-158
• /
• 2008

This research considered that the significance of the NT(Nano Technology) which gradually increased the importance of it and investigated the technology development current situation of the Korea, U.S.A, Japanese, Europe. Therefore, in domestic and foreign, this research was widely used. It includes the tendency of the technology about processing methods using the ion beam and electron beam among the In-line system related technique field for the high efficiency energy beam application nano scale manufacturing components. The technique level of Korea, the international trend of technology and cooperation research present condition are dealt in. The information about the checked out of business of research and development of the country consistency and policy establishment try to be provided.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.175-180
• /
• 2005

The application of focused ion beam (FIB) technology in micro/nano machining has become increasingly popular. Its use in micro/nano machining has advantages over contemporary photolithography or other micro/nano machining technologies such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries. In this research, fabrication of micro plasma electrode was carried out using FIB. The one of problems of FIB-sputtering is the redeposition of material including Ga+ ion source during sputtering process. Therefore the effect of the redeposition was verified by EDX. And the micro plasma electrode of copper was fabricated by FIB.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.581-584
• /
• 2005

Ion beam processing is one of the key technologies to realize mastless and resistless sub 50nm nano fabrication. Unwanted effects, however, may occur since an energetic ion can interact with a target surface in various ways. Depending on the ion energy, the interaction can be swelling, deposition, sputtering, re-deposition, implantation, damage, backscattering and nuclear reaction. Sputtering is the fundamental mechanisms in ion beam induced direct patterning. Re-deposition and backscattering are unwanted mechanisms to avoid. Therefore understanding of ion beam-solid interaction should be advanced for further ion beam related research. In this paper we simulate some important interaction mechanisms between energetic incident ions and solid surfaces and the results are compared with experimental data. The simulation results are agreed well with experimental data.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.268-271
• /
• 2005

Etch resistance of mask layer on silicon substrate modified by AFM-based Tribo-Nanolithography (TNL) in Aqueous Solution in an aqueous solution was demonstrated. n consists or sequential processes, nano-scratching and wet chemical etching. The simple scratching can form a mask layer on the silicon substrate, which acting as an etching mask. For TNL, a specially designed cantilever with diamond tip, allowing the formation of mask layer on silicon substrate easily by a simple scratching process, has been applied instead of conventional silicon cantilever fur scanning. This study demonstrates how the TNL parameters can affect the etch resistance of mask layer, hence introducing a new process of AFM-based maskless nanolithography in aqueous solution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.330-333
• /
• 2005

The fabrication of mold fur nano imprint lithography (NIL) is experimentally reported using the scanning probe lithography (SPL) technique, instead of the conventional I-beam lithography technique. The nanometer scale patterning structure is fabricated by the localized generation of oxide patterning on the silicon (100) wafer surface with a thin oxide layer, The fabrication method is based on the contact mode of scanning probe microscope (SPM) in air, The precision cleaning process is also performed to reach the low roughness value of $R_{rms}=0.084 nm$, which is important to increase the reproducibility of patterning. The height and width of the oxide dot are generated to be 15.667 nm and 209.5 nm, respectively, by applying 17 V during 350 ms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.689-693
• /
• 2005

Inkjet printing is a non-contact and direct writing associated with a computer. In the industrial field, there have been many efforts to utilize the inkjet printing as a new way of manufacturing, especially for electronic devices. For the application of inkjet printing to electronic field, one of the key factors is exact realization of designed images into printed patterns. In this work, micro patterning for conducting line has been studied using the piezoelectric print head and silver nano ink. Dimensions of printed images have been predicted in terms of print resolution and diameter of a single dot. The predicted and the measured values showed consistent results. Using the results, the design capability for industrial inkjet printing could be achieved.