• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.92-92
• /
• 2012

최근 반도체 산업 경기의 활황에 따라 반도체 생산 설비 또한 꾸준히 증설되어가는 추세이며 고진공 펌프의 수요 또한 점차적으로 증가하고 있는 현실이다. 하지만, 국내 기술의 부족으로 고진공 펌프는 대부분 해외로부터의 수입에 의존하고 있다. 반도체 생산 설비는 매우 보수적인 설비로써 새로 개발되는 고진공 펌프가 반도체 생산 설비에 사용되기 위해서는 원천기술, 상품화 기술 및 신뢰성 기술을 확보해야 하며, 특히 한미/한일/한-EU FTA 등에 대비하여 제품의 국산화가 시급한 실정이다. 이에 고진공펌프의 수입이 급증할 것으로 예상되어 국내 진공업체에서도 크라이오펌프의 개발이 진행되고 있다. 본 연구에서는 지식경제부 제조기반 산업원천기술개발사업에 주관기관으로 수행하여 한국기계연구원 및 한국원자력연구원과 급속재생형 저진동 크라이오펌프의 기술 개발을 통해 전량 수입하는 크라이오펌프를 국산화를 도모 하고자 한다. 크라이오펌프의 주요 생산업체는 미국기업의 CTI사이며, 상품화 기술의 성능 확보를 위한 CTI사의 GM 극저온 냉동기와 현재 개발 및 상용화 준비를 하는 극저온 맥동관 냉동기에 대해 성능평가 지표를 제시하며, 신뢰성 확보를 위한 한국과학기술원 나노종합팹센터의 스퍼터 공정장비에 대한 CTI사 크라이오펌프와 상용화를 위한 개발품의 공정 현장시험에 대해 소개하고자 한다.

• Korean Journal of Metals and Materials
• /
• v.48 no.5
• /
• pp.462-468
• /
• 2010

Carbon Nanotubes (CNTs) have recently emerged as a material with outstanding properties. It has shown promising potential for applications in many engineering fields as electronic devices, thermal conductors, and light-weight composites. Researchers have investigated their use as reinforcements in themetal matrix composites of CNTs. In the present work, we decorated CNTs with Ni particles by electroless plating. The CNTs were wet-ball milled for various milling times with a nickel sulfate solution. The precipitated Ni particles were observed mainly by FESEM. In this study, the dispersion of the CNTs and Ni particles was improved with the addition of the surfactant. Also, as the CNTs were shortened and widened by an increased ball milling time, the size of the precipitated Ni particles increased. It was estimated that the CNTs were deformed and caused some defects on their surface during the ball milling process. Those defects were assumed to be heterogeneous nucleation sites for the Ni particles.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.89-94
• /
• 2021

The mechanical reliability of flexible devices has become a major concern on their commercialization, where the importance of reliable bonding is highlighted. In terms of component materials' properties, it is important to consider thermal damage of polymer substrates that occupy large area of the flexible device. Therefore, room temperature bonding process is highly advantageous for implementing flexible device assemblies with mechanical reliability. Conventional epoxy resins for the bonding still require curing at high temperatures. Even after the curing procedure, the bonding joint loses flexibility and exhibits poor fatigue durability. To solve this problems, low-temperature and adhesive-free bonding are required. In this work, we develop a room temperature bonding process for polymer substrates using carbon nanotube heated by microwave irradiations. After depositing multiple-wall carbon nanotubes (MWNTs) on PET polymer substrates, they are heated locally with by microwave while the entire bonding specimen maintains room temperature and the heating induces mechanical entanglement of CNT-PET. The room temperature bonding was conducted for a PET/CNT/PET specimen at 600 watt of microwave power for 10 seconds. Thickness of the CNT bonding joint was very thin that it obtains flexibility as well. In order to evaluate the mechanical reliability of the joint specimen, we performed lap shear test, three-point bending test, and dynamic bending test, and confirmed excellent joint strength, flexibility, and bending durability from each test.

• Membrane Journal
• /
• v.23 no.4
• /
• pp.304-311
• /
• 2013

In fermentation-separation processes, nanofiltration membrane processes can be used to separate organic acid and other byproducts such as sugars and proteins. In this study, new nanofiltration membranes were prepared to improve organic acid permeability during the separation processes of fermentation broth. Positively charged nanofiltration membrane was introduced to reduce lactic acid rejection by electrostatic attraction between lactic acid and nanofiltration membrane. Newly fabricated nanofiltration membranes were prepared by grafting cationic polyelectrolyte, PEI, on membrane surface. Thenanofiltration membranes showed positively charged surface potential. As a result, lactic acid rejection was remarkably reduced while the rejection of glucose was not changed significantly.

• Journal of the Korean Vacuum Society
• /
• v.13 no.1
• /
• pp.39-45
• /
• 2004

Ultraviolet-nanoimprint lithography (UV-NIL) is a promising method for cost-effectively defining nanoscale structures at room temperature and low pressure. A 5${\times}$5${\times}$0.09 in. quartz stamp is fabricated using the etch process in which a Cr film was employed as a hard mask for transferring nanostructures onto the quartz plate. FAS(Fluoroalkanesilane) is used as a material for anti-adhesion surface treatment on the stamp and a thin organic film to improve adhesion on a wafer is formed by spin-coating. The low viscosity resin droplets with a nanometer scale volume are dispensed on the whole area of the coated wafer. The UV-NIL experiments have been performed using the EVG620-NIL. 370 nm - 1 m features on the stamp have been transferred to the thin resin layer on the wafer using the multi-dispensing method and UV-NIL process. We have measured the imprinted patterns and residual layer using SEM and AFM to evaluate the potential of the process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.391-392
• /
• 2008

최근 나노 금속의 대량 생산에 대한 기술이 확보됨에 따라, 메탈젯을 이용한 연구가 활발히 진행되고 있다. 메탈젯의 연구 범위는 RFID, PCB, MLCC 전극, 태양전지전극, PDP 전극, EMC용재료 등 그 응용 범위를 넓혀 가고 있다. 이러한 응용 기술 대표적인 배선형성 기술인 PCB 제조에 대한 연구는 40um 이하의 고해상도 기판 개발을 요구하고 있다. 선폭은 40um 이하를 유지하면서, 두께는 10um 이상으로 CCL을 대체 하기 위한 기판 형성 기술은 응용기술은 가장 어려운 난이도의 기술이다. 메탈젯 기술은 매우 복합적인 연구분야로 나노 재료의 개발, 인쇄공정의 개발, 기재 표면처리 기술, 헤드 기술의 개발을 동시에 만족할 때 가능하다. 배선 형성을 위하여 나노 잉크를 이용하여 직접 인쇄를 진행하고, 소결하여 전도성을 얻게 된다. 본 연구에서는 미세노즐에 토출 가능한 잉크젯용 잉크 조성을 결정하고, 기판과의 신뢰성을 확보하기 위하여 접착력의 평가, 전도도의 평가, 건조 시간 조절을 통한 Crack 문제 해결, 미세 선폭의 균일성 조절에 관한 실험을 진행하였다.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.694-697
• /
• 2019

In recent years, titanium dioxide powders were produced as nanoparticles or nanowires or nanotubes in one-dimensional structure, and mesoporous spheres in 3-D to improve their crystallinities, which were further used as photo-electrode materials and for preventing photo-aging. In this study, a nano sol composed of titanium dioxide exhibiting a high crystallinity was synthesized using n-alcohol as a solvent. The crystallinity of the nano sol was confirmed by FE-SEM, and XRD, while the UV blocking rate confirmed by UV-Vis spectrometry results. Changes in the crystallinity were investigated by varying the types of solvents such as butanol, propanol and ethanol. The synthesized particle sizes were from 200 to 250 nm, and the optical transmittance showed a high blocking rate in the UVB and UVA range. It is expected that a high transmittance at 550 nm wavelength can increase the photoelectric conversion efficiency of solar cells and the UV blocking efficiency.

• Composites Research
• /
• v.28 no.4
• /
• pp.226-231
• /
• 2015

Various characteristics(thermal expansion, microstructure, etc.) and mechanical properties of CNT-aluminum nano composites manufactured by volume production system were evaluated. Also, formability and durability were evaluated for potential applications in automotive parts, via compared with high-elasticity material (A390) and the current commercial product. As a result, this composite has excellent mechanical properties and formability, therefore, to verity its potential for application as light and high strength materials in automobile part.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.57.1-57.1
• /
• 2009

나노이산화티타늄은 인체에는 화장품, 의약, 식품분야 등에 쓰이고 외부 환경 재료에는 광촉매로서 유독가스 정화제, 옥내 외 항균, 수소발생 가시광 응답형 촉매 및 멤브레인 필터 등과 전자소재용 유전재료, 발광 재료 등 용도가 다양하다. 나노 산화티타늄 화합물의 제조법은 수열합성법, 기상법 등 여러 방법이 있다. 이들에 대한 리뷰의 목적은 2009년도 정부의 투자 계획 중에서 본제목에 관련되는 핵심 산업 재원 원천기술 개발, 태양광, 풍력 등의 신재생 에너지 개발, 록색 기술 개발을 통한 에너지절약형 LED 개발, 차세대 핵심환경 기술 개발, 핵심나노기반기술개발 등의 개발을 위하여 4,363억 원의 예산을 편성하고 연구자와 기술자들이 참여하여 유익한 실적이 창출되기를 원하고 있으므로 본 발표자들은 이 분야에서 연구하는 연구자와 기술자들에게 이 분야에 관련되는 자료를 참고로 제시하는데 있다. 페로브스카이트형 산화물인 유전재료($BaTiO_3$), 발광재료(CaTiO3:Pr3+적색), 박막형 반응기재료($Ca0.8Sr0.2TiO_3$), 등의 여러 가지 산화물은 류통식 급속 승온 수열 합성법, 겔 졸 법, 수열 합성법 등 여러 방법에 의하여 페로브스카이트형 산화물 입자 직경이 약 20nm~100nm 범위까지 합성된다. 태양광을 조사하여 물을분해 해서 수소를 생산하는 산화티타늄계 가시광 응답형 Vis-$TiO_2$ 박막은 기상법으로 제조하는데 한 예로써 RF 스퍼터링법으로 박막을 제조하여 수소와 산소를 회수하였으며, 황도프산화티타늄, 질소 도프 산화티타늄은 유기물 분해에 의한 공해제거, $NO_x$ 제거 등 환경정화에 사용되고, 고온 고압수법/산화티타늄 복합기술에 의해서는 바이오매스 분해 하고, 일종의 수열법인 개량형 HyCOM 법은 가시광 응답성 산화티타늄을 합성하여 NO가스 제거에 사용한다. 이들 여러 방법에 관한 것을 소개하고저 한다.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.389-398
• /
• 2019

Hydrogen energy is not only a solution to climate change problems caused by the use of fossil fuels, but also as an alternative source for the industrial power generation and automotive fuel. Among hydrogen production methods, electrolysis of water is considered to be one of the most efficient and practical methods. Compared to that of the fossil fuel production method, the method of producing hydrogen directly from water has no emission of methane and carbon dioxide, which are regarded as global environmental pollutants. In this paper, the alkaline water electrolysis (AWE) and polymer electrolyte membrane water electrolysis (PEMWE), which are one of the hydrogen production methods, were discussed. Recent research trends of hydrocarbon electrolyte membranes and the crossover phenomenon of electrolyte membranes were also described.