• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.199-204
• /
• 2010

Much of the coal ash by thermal power plant has gradually been increased, however researches on the recycling of bottom ash has not been investigated enough so far. In this research, the lysimeter test was conducted to find out the possibilities of bottom ash as soil amendment to improve the physiochemical properties of sandy topsoil of turfgrass in golf course. The turfgrass growth test and leaching test were conducted on the lysimeter. The lysimeter columns were manufactured with various topsoil mixing ratios of 0, 10, 20, 30, and 50% of bottom ash with sand. As a result of leachate analysis through the lysimeter column, the higher ratios of bottom ash mixed affect significantly on water holding capacity of topsoil sand media with decreasing of the percolation rate. The results of leachate analysis in every three days interval, the pH of leachate increased with the bottom ash ratios, but the volume of $NO_3$-N, $NH_4$-N and K decreased significantly. However, the level of EC of leachate had constantly maintained. These results indicate that the application of bottom ash may improve turfgrass growth with water holding capability and fertility of sandy topsoil. However, the negative effects of the bottom ash also evaluated by reducing water permeability and solubility of $PO_4$-P by adsorption into soil particles. The results indicates that the reasonable mixing ratio of the bottom ash as soil amendment should be less than 20% (v/v) with sand which has a low water-holding and fertility in golf course topsoil layers.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.2
• /
• pp.77-82
• /
• 2007

Purpose: This study investigates peripheral dose from physical wedge and dynamic wedge system on a multileaf collimator (MLC) equipment linear accelerator. Materials and Methods: Measurments were performed using a 2D array ion chamber and solid water phantom for a 10$\times$10 cm, source-surface distance (SSD) 90 cm, 6 and 15 MV photon beam at depths of 0.5 cm, 5 cm through dmax. Measurments of peripheral dose at 0.5 cm and 5 cm depths were performed from 1 cm to 5 cm outside of fields for the dynamic wedge and physical wedge 15$^\circ$, 45$^\circ$. Dose profiles normalized to dose at the maximum depth. Results: At 6 MV photon beam, the average peripheral dose of dynamic wedge were lower by 1.4% and 0.1%. At 15 MV photon beam, the peripheral dose of dynamic wedge were lower by maximum 1.6%. Conclusion: This study showed that dynamic wedge can reduce scattered dose of clinical organ close to the field edge and reduced treatment time. The wedge systems produce significantly different peripheral dose that should be considered in properly choosing a wedge system for clinical use.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.22-34
• /
• 2011

This paper presents the investigation results of a research on how engineers can analyze the economic effect of the ETCS(Electronic Toll Collection System) installed to minimize the vehicle delays on freeway tollgates during toll payments. This research considered this economic effect to occur in the form of vehicle passing time reductions at the ETCS, and the multi-service queuing theory was applied to estimate these values. This research found: 1) When vehicles approaching tollgates show Poisson distribution and the service time of the ETCS shows Exponential distribution, the multi-service queuing theory would be applicable for estimating vehicle passing times at toll-gates, 2) Despite the ETCS placement, exit sections of tollgates give a greater reduction of vehicle passing times than entering sections due to more delays at conventional toll payments, and 3)The ETCS would not guarantee vehicle passing time reductions all the time, because in such a case as many vehicles were queuing at the ETCS, the total delay level for a toll gate would increase greatly. In addition, in order to examine the accuracy of the estimated vehicle passing values, this research compared the values from the multi-service queuing theory with the observed values from a set of field survey values at freeway toll-gates, and found that the two values were in a good agreement with a very low error range of 1-3 seconds per vehicle. Based on this result, the multi-service queuing theory was recommended for practice.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.886-894
• /
• 2014

A wideband bow-tie antenna fed by wideband microstrip-coplanar stripline(CPS) balun and band notch structures that can be applied to bow-tie antenna are proposed in this paper. In order to increase bandwidth, bow-tie radiators are reshaped so that the surface current flows continuously, and wideband impedance matching is achieved by adjusting strip width and spacing of CPS feeding line. The VSWR is measured as 2:1 over the wide frequency range of 2.3~12 GHz. The fabricated antenna size is $60mm{\times}60mm$. In order to achieve the band-notch function at WLAN(5.8 GHz), ${\lambda}/4$ folded-slits located ${\lambda}/4$ away from feeding point are utilized. To minimize the slit size, folded-slit type is adopted. The measured VSWR is 7:1 and gain attenuation is 14 dB at 5.8 GHz.

• Korean Journal of Ichthyology
• /
• v.10 no.2
• /
• pp.184-190
• /
• 1998

The early life history of black bullhead, Pseudobagrus koreanus, endemic to Korea was investigated to get biological information needed in artificial production of seedlings and in recovering natural resources. The fertilized eggs showed some characteristics in having heavy sticky material and minute folds which is formed radical pattern on the egg membrane. The shape of egg was spherical and $2.59{\pm}0.08$(2.45~2.70, n=10)mm in diameter. The yolk had not oil globule. The first cleavage was observed 2 hrs after insemination at $21{\sim}23^{\circ}C$, and the progressive cleavage were done about 30 min. interval. The characteristic changing of the yolk surface started at morula stage and continued to the end of gastrula. Hatching was started 72 hrs and completed 90 hrs after fertilization. The size of the larvae were 5.41~5.81mm in total length and 2.76~2.94mm in preanal length, and the number of so mites was 15-16+33~34(48~50). The barbels and swimbladder were completed and all the fins except second dorsal were appeared 1 week after hatching. The larvae attained 9.67~10.52mm in total length and 5.20~5.65mm in preanal length. All the fin sets and color pattern were completed 2 weeks after hatching and body mucus was secreted at that stage. The juvenile attained 14.59~16.02mm in standard length, 3.31~4.16mm in head length and 8.07~9.31mm in prenal length.

• Childhood Kidney Diseases
• /
• v.18 no.2
• /
• pp.92-97
• /
• 2014

Purpose: Bisphosphonates are widely used for the management steroid-induced osteoporosis (SIO) in children. With the increasing use of bisphosphonates, there have been reports of abnormal radiological findings in the growing skeleton. Therefore, their use in pediatric patients remains controversial. The present study was conducted to evaluate the long-term follow-up radiographic features, particularly metaphyseal sclerotic lines, in children who receive pamidronate therapy for nephropathy. Methods: Twenty-four children with nephropathy treated with oral calcium and pamidronate (mean duration, 9 months; dose, 100 mg daily), were evaluated retrospectively. All patients had SIO secondary to chronic glucocorticoid therapy for treating nephropathy. Long bone radiographic imaging was performed before treatment with pamidronate, and at follow-up, several years later. Physeal growth rates were estimated by measuring the distance that the sclerotic lines moved on the radiographs during the corresponding time intervals. Results: The mean follow-up period was 138 months. Long bone radiographs showed well-defined sclerotic lines at the metaphyseal ends, progressively moving from the physeal plate to the diaphysis, in all patients. The mean rate of movement of the sclerotic line was 6.21 mm per year. In 12 patients, the lines disappeared. The mean rate of growth in height was 7.33 cm per year. Conclusions: Results of long-term follow-up suggest that the metaphyseal sclerotic lines associated with pamidronate treatment tend to disappear without affecting overall skeletal growth. Bisphosphonate treatment for SIO in children with nephropathy seems to be safe, although further studies in larger number of patients are needed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.1
• /
• pp.22-29
• /
• 1988

In order to investigate the shearing efficiency of the Danish sein net using in the sea area of korea, the autors carried out a models of prototype net, and the nets on which the canvas attached to the rear part of the square and to the extension wing of the prototype net, respectively. The model net is made of scale of 1/35 according to Tauti's Law of similarity on fishing gear. The result obtained are as follows: 1. The hydrodynamic resistance increased the maximum 30% in case of the canvas attached to the square, and decreased the maximum 35% in case of the canvas attached to the extension wing in comparison with prototype net. 2. The height of net mouth increased the maximum 12% in case of the canvas attached to the square, and decreased the maximum 5.8% in case of the canvas attached to the extension wing in comparison with prototype net. 3. The width of net mouth decreased the maximum 4% in case of the canvas attached to the square, and increased the maximum 8.4% in case of the canvas attached to the extension wing in comparison with prototype net. 4. The projective area of net mouth increased the maximum 13.6% in case of the canvas attached to the square and increased the maximum 11.8% in case of the canvas attached to she extension wing in comparison prototype net.

• Analytical Science and Technology
• /
• v.25 no.5
• /
• pp.265-272
• /
• 2012

Okamoto cavity was modified to generate high power (2.45 GHz, 2 kW) He, N2 and Ar plasmas with WR-340 waveguide. Many factors which influence to the plasma generation were optimized and investigated for the spectroscopic properties of the He plasma generated. Some of the important factors are the diameter of the inner conductor, the distance between the inner and outer conductors and the distance between the tip of the inner conductor and the torch. After optimization for the He, two torches (a commercial mini torch for ICP and a tangential flow torch made locally) were compared and showed similar results for the helium plasma gas flow of 25 L/min~30 L/min. A tall torch (extended) was used to block the air in-flow and reduced the background intensity at 340 nm region (NH band). Emission intensity was measured for determination of halogen element in the aqueous solution with power and carrier gas flow rate. Electron number density and the excitation temperature were on the order of $3.67{\times}10^{11}/cm^3$ and 4,350 K, respectively. These values are similar or a bit smaller than other microwave plasmas. It has been possible to analyze aqueous samples. The detection limit for Cl (479.45 nm) was obtained to be 116 mg/L and needs analytical optimization for the better performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.101-112
• /
• 2015

II~VI compound semiconductors, $Zn_xCd_{1-x}S$ thin films have been synthesized onto indium-tin-oxide(ITO) coated glass substrates using thermal evaporation technique. The composition ratio x($0{\leq}x{\leq}1$) was varied to fabricate different kinds of $Zn_xCd_{1-x}S$ thin films including CdS(x=0) and ZnS(x=1) thin films. Then, the deposited thin films were thermally annealed at $400^{\circ}C$ to enhance their crystallinity. The chemical composition and electronic structure of films were investigated by using X-ray photoelectron spectroscopy(XPS). The optical energy gaps of the samples were determined by ultra violet-visible-near infrared(UV-Vis-NIR) spectroscopy and were found to vary in the range of 2.44 to 3.98 eV when x changes from 0 to 1. Finally, we measured the THz characteristics of the $Zn_xCd_{1-x}S$ thin films using THz-TDS(time domain spectroscopy) system to identify the capability for electronic and optical devices in THz region.

• Journal of the Korean Institute of Gas
• /
• v.20 no.4
• /
• pp.78-84
• /
• 2016

In this work, finite element investigations were carried out to optimize reverse drawing process design for manufacture of high-capacity aluminum liner used in fuel cell vehicle. The tensile tests with aluminum alloy Al6061 annealed at $350^{\circ}C$ were carried out to obtain the flow stresses. In order to estimate more accurate flow stresses after necking, the flow stresses were estimated from the comparison of load vs. displacement curves which were obtained from experimental and simulation results of tensile tests. In case of finite element analyses of reverse drawing processes, it was focused on the effects of process designs such as punch and die designs, blank holding force, drawing ratio and the clearance between the punch and blank holder on the generation of wrinkle and fracture of the blank and partially heated punch. However, it was revealed that experimental results still show the fracture at the end of 2nd drawn cup, although partially heated punch is used. Nevertheless, the drawn cup can be used because the sufficient length of the drawn cup for the next flow forming process and spinning process was obtained.