• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.4
• /
• pp.1-5
• /
• 2015

In this work, a study was conducted to investigate the effect of diaphragm thickness on the regression rate of the hybrid rocket motor. To observe the flow pattern and the recirculation zone, visualizations of combustion chambers with different diaphragm thickness (5mm, 10mm) were performed. It was found that the case with 5 mm thickness had a larger recirculation zone and therefore, had a higher regression rate than the case with 10mm thickness due to the increased residence time and heat transfer toward the fuel surface. Finally, it was concluded that the thickness of diaphragm can be a critical parameter for the enhancement of the regression rate.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.4
• /
• pp.67-74
• /
• 2014

Departmentalized Classroom System is new school operating system to apply social needs. Recent social needs are characterized as learning environment and self-learning system. The purpose of this study is to provide basic data for equal learning environment condition in middle school applying departmentalized classroom system. This study has progressed through analyzing on 11 remodelling case of middle school in Gangwon-Do. The method of this study is visiting middle schools that operate the system, grasping the condition for environment composition, and investigating and analyzing practical use of the environment. The results of this study are summarized as follows: 1) The space compositions for departmentalized classroom system are generally desirable, but some schools take irrational space composition, especially on home base-teacher laboratory, classroom-teacher laboratory. 2) The space area distributions are different in every school. This result is based on not taking standard criterion on space area distribution.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.78-85
• /
• 2007

In this study, we performed finite element analysis for the design of a medical centrifuge and two-types of centrifuge were compared with each other. The types of centrifuge are 2-arm straight type and 3-arm type. Structural analysis was done with respect to the change of the rotational speed of the rotor of a centrifuge. When the rotor of centrifuge was rotated, the von Mises stress of 2-arm straight type-rotor was compared with the von Mises stress of 3-arm type. The margin of safety was estimated from the result. We found the critical speed of centrifuge from the campbell diagram by modal analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1249-1256
• /
• 2018

For the screening factor of the tunnel and overbridge structure in the electrified railway, the ITU-T regulation denotes only a theoretical estimation method, and the actual numeric values are notified differently by the official announcement of each nations. In this study, the factors which can affect the screening factor are investigated and analysed by FEM and a suitable calculation method based on multi-conductor line theory for the current pre-estimation formula for the induction noise voltage in the national notice is presented. The case studies are performed using the real data of the tunnel and the overbridge of the electrified railway, and a satisfactory formula for the determining of screening factor is derived.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.238-240
• /
• 2002

지리정보시스템이 널리 사용됨에 따라 여러 다양한 기능들이 요구되고 있다. 특히, 2차원이 아닌 지표면의 고도를 가진 지형데이터를 표현하고 분석하는 기능이 지리정보시스템의 중요한 기능으로 요구되어지고 있다. 현재 지형데이터를 표현하는데 가장 많이 이용되는 모델은 DEM, TIN, 등고데이터가 있는데 각각의 모델은 응용분야에 따라 장단점을 가진다. 지리정보시스템에서 사용되는 실제의 지형데이터가 대용량이기 때문에, 데이터를 분석하는데 드는 비용이 매우 클 뿐만 아니라 분석을 위한 데이터 로드에도 상당한 비용이 든다. 그러므로 최대한 적은 데이터 양으로 지형을 표현하는 것이 지리정보시스템에서는 매우 중요하다. 본 논문에서는 데이터 양을 줄임과 동시에 지형의 중요 정보를 최대한 보존하는 형태적 지형 모델을 제안한다. 실험에 따르면, 제안한 모델은 TIN에 비해 데이터의 양이 작을 뿐만 아니라 지형의 주요 형태적 정보를 유지함으로써 연산의 정확성도 높이는 장점을 보인다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.168-170
• /
• 1999

지리정보시스템과 같은 공간 데이터베이스에서 다루는 데이터는 대용량이며, 사용자의 다양한 질의에 따라 빠르게 접근할 수 있어야 한다. 그런데 이때 성능의 대부분이 디스크 접근시간에 의해 영향을 받으므로 접근시간을 줄이는 기술이 필요하다. 이는 다수의 디스크 공간에 데이터를 분산하여 저장하는 디클러스터링 방법을 사용함으로써 효과적인 성능 향상을 기대할 수 있다. 효과적인 디클러스터링 방법은 주어진 질의에 대하여 동시에 접근될 가능성이 있는 공간 객체를 다른 디스크에 각각 저장함으로써 한번에 접근하는 병렬성을 높일 수 있다. 그러나 하나의 디스크에게 할당 가능한 공간 객체들을 서로 다른 디스크에 할당하는 것은 오히려 성능의 저하를 초래할 수 있다. 이러한 두 가지 조건을 동시에 만족하기 위해서는 공간 객체들을 클러스터링 한 후, 크러러스터 단위로 디스크로 할당하는 것이 효과적이다. 이전에 제시된 디클러스터링 방법들은 이러한 요소를 고려하지 않았다. 이에 본 논문에서는 주어진 공간 객체들에 대해서 일정한 크기의 클러스터를 만들고 클러스터 단위로 디클러스터링 하여 효율적인 성능 향상을 보이는 새로운 방법에 대해서 제시하고자 한다. 또한 이전에 제시되어졌던 여러 가지 디클러스터링 방법들과의 비교실험을 통해, 본 논문에서 제시한 방법이 가장 효과적인 방법임을 밝히고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.163-166
• /
• 2012

The hybrid combustion were performed with the different diaphragm position for the experimental studies on characteristic of regression rate and combustion efficiency. The diaphragm was installed in 25% and 50% of fuel length from the front of solid fuel, respectively. As results of experiments, the position of diaphragm has small effect on the regression rate and combustion efficiency. It is considered that the diaphragm has local effect near the diaphragm.

• Journal of Environmental Science International
• /
• v.32 no.1
• /
• pp.11-24
• /
• 2023

This study aimed to provide preliminary data for the improvement of the tree doctor qualification test (first written test), which was newly created by enforcing the Forest Protection Act on June 28, 2018., The high demand for system improvement accelerated this study. The results were analyzeds through literature and questionnaire surveys. Writing test questions and the license of the tree doctor qualification exam are currently managed by the Korea Forestry Research Institute, and it is deemed that the test should be entrusted to Human Resources Development Service of Korea for fair and transparent management. Additionally, the plan for the improvement of the subject-wise scope of examination questions writing, difficulty of test questions, and acceptance rate of the first test should be prepared after public hearings or seminars related to the examination questions.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.83-90
• /
• 2015

The equalization policy needs various factors-standardization of educational environment, standardization of learning method, standardization of teacher ability, etc. Especially the standardization of educational environment is the base of various factors. But the recent educational environment condition of high school is not equal. The purpose of this study is to provide basic data for equal learning environment condition in high school applying departmentalized classroom system. This study has progressed through analyzing on 9 remodelling case of high school in Gangwon-Do. The method of this study is visiting high schools that operate the system, grasping the condition for environment composition, and investigating and analyzing practical use of the environment. The results of this study are summarized as follows: 1) The space compositions for departmentalized classroom system are generally desirable, but some schools take irrational space composition, especially on home base-teacher laboratory, classroom-teacher laboratory. 2) The space area distributions are different in every school. This result is based on not taking standard criterion on space area distribution.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.1 s.13
• /
• pp.41-52
• /
• 1999

In order to correct mismatches between neighboring digital maps, the middle line method has been widely used. However, it may result in not only a corruption of the topological consistency between the objects near to boundaries but also degeneration of accuracy. In this paper, we propose two edge-matching methods to overcome the problem of the middle line method. The first method is based on the rubber sheeting, which performs an elastic transformation for the objects located around the boundaries. The second method transforms the geometry of objects by the function of the distance from the boundary. These methods have important advantages that they preserve the topology of the original maps and improve tile accuracy, compared with the previous methods.