• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.4
• /
• pp.155-159
• /
• 2008

In this work, we report synthesis of free-standing ZnO/Zn core-shell micro-polyhedrons using metal Zn pellets as a source material by the thermal chemical vapor deposition process. Scanning and transmission electron microscopy measurements were introduced to investigate morphologies and structural properties of as-grown ZnO/Zn core-shell micro-polyhedrons. It was found that micro-polyhedrons were composed of inner single-crystalline metal Zn surrounded by single-crystalline ZnO nanorod arrays. The inner single crystalline metal Zn with micro-scale diameter has a hexagonal crystal structure. Diameter and height of ZnO nanorods covering the metal Zn surface are below 10 nm and 100 nm, respectively. It was also confirmed that c-axis oriented ZnO nanorods are single crystalline with a hexagonal crystal structure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.1-6
• /
• 1995

A recording current meter was deployed in the shallow western part of Deukryang Bay from 1 July to 7 August 1992 during which the wind was weak. Principal component in NNE-SSW direction parallel to the axis of the bay had $98.7\%$ of the total variance and the orthogonal component of only $1.3\%$. Spectral analysis of the principal component revealed that the semidiurnal component comprised about $91.2\%$ of total energy. Whereas the diurnal and longer components were less than $2.5\%$ the shallow water tide was about $6.3\%$ . Weak mean current of 0,8cm/sec in SSE direction implies that the slow circulation in the bay is counterclockwise having the northward net flow in the deep eastern part.

• Journal of Environmental Science International
• /
• v.22 no.12
• /
• pp.1683-1690
• /
• 2013

We investigated the spatial and temporal variations of phytoplankton in Youngil Bay as well as the effect of water physico-chemical parameters. Water samples at three stations were collected and measured monthly from May to November in 2010. The taxa of phytoplankton observed in this study were classified as 33 Bacillariophyceae, 23 Dinophyceae, 1 Euglenophyceae, 2 Crysophyceae and 1 Cryptophyceae. The highest biomass of phytoplankton was observed at inner station in September, which was characterized high concentration of dissolved inorganic phosphate(DIP) in surface water after rainfall. Nutrient concentrations, chlorophyll-a and phytoplankton biomass values showed the marked trend to decrease from the inner bay to the outer bay. Pearson's correlation co-efficient between salinity and other water parameters including chlorophyll-a, pH and DIP showed the strong negative relationship r=-0.82, r=-0.78 and r=-0.75 (p<0.01), respectively. These results indicate that the water quality of Youngil Bay could be stimulated by nutrient enriched input from Hyeogsan River discharge, and the spatial and temporal distribution of phytoplankton biomass principally limited to DIP concentration from Hyeogsan river.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.806-816
• /
• 2009

Character recognition system consists of four step; text localization, text segmentation, character segmentation, and recognition. The character segmentation is very important and difficult because of noise, illumination, and so on. For high recognition rates of the system, it is necessary to take good performance of character segmentation algorithm. Many algorithms for character segmentation have been developed up to now, and many people have been recently making researches in segmentation of touching or overlapping character. Most of algorithms cannot apply to the text regions of management number marked on the slab in steel image, because the text regions are irregular such as touching character by strong illumination and by trouble of nozzle in marking machine, and loss of character. It is difficult to gain high success rate in various cases. This paper describes a new algorithm of character segmentation to recognize slab management number marked on the slab in the steel image. It is very important that pre-processing step is to convert gray image to binary image without loss of character and touching character. In this binary image, non-touching characters are simply separated by using vertical projection profile. For separating touching characters, after we use combined profile to find candidate points of boundary, decide real character boundary by using method based on recognition. In recognition step, we remove noise of character images, then recognize respective character images. In this paper, the proposed algorithm is effective for character segmentation and recognition of various text regions on the slab in steel image.

• Atmosphere
• /
• v.20 no.4
• /
• pp.483-494
• /
• 2010

The vertical profiles of the extinction coefficient, the backscatter coefficient, and the lidar ratio (i.e., extinction-to-backscattering ratio) for Asian dust and pollution aerosols are determined from Raman (inelastic) and elastic backscatter signals. The values of lidar ratios during two polluted days is found between 52 and 82 sr (July 22, 2009) and 40~60 sr (July 31, 2009) at 52 nm, with relatively low value of particle depolarization ratio (<5%) and high value of sun photometer-derived Angstrom exponent (> 1.2). However, lidar ratios between 25 and 40 sr are found during two Asian dust periods (October 20, 2009 and March 15, 2010), with 10~20% of particle depolarization ratio and the relatively low value of sun photometer-derived Angstrom exponent (< 0.39). The lidar ratio, particle depolarization ratio and color ratio are useful optical parameter to distinguish non-spherical coarse dust and spherical fine pollution aerosols. The comparison of aerosol extinction profiles determined from inelastic-backscatter signals by the Raman method and from elastic-backscatter signals by using the Fernald method with constant value of lidar ratio (50 sr) have shown that reliable aerosol extinction coefficients cannot be determined from elastic-backscatter signals alone, because the lidar ratio varies with aerosol types. A combined Raman and elastic backscatter lidar system can provide reliable information about the aerosol extinction profile and the aerosol lidar ratio.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1893-1895
• /
• 2008

In this paper, we investigated the maximum ankle joint plantarflexion moment(MPM) of young and elderly subjects during various modes of isokinetic contractions with special interest in the elderly females who were reported to have higher fall rate than the elderly males. Subjects include the young subjects(14 males: $22.7{\pm}2.5yrs$, 13 females: $20.5{\pm}1.3yrs$) and the elderly subjects(17 males: $65.8{\pm}10.5yrs$, 26 females: $71.4{\pm}5.2yrs$). The MPM was normalized by each subject's body weight. The MPM of elderly females was the weakest among the groups, particularly, at the eccentric contractions. The male-to-female ratio of MPM was greater in the elderly than in the young and the young-to-elderly ratio of MPM was greater in female than in male, both during the eccentric contractions. The result suggests that the decreased muscle force per body weight, especially at the eccentric contraction, may be one reason for the more frequent fall of the elderly female than the elderly male.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.2 s.50
• /
• pp.497-510
• /
• 1995

This study was carried out to assess work ability of manufacturing workers and managerial workers. Subjects were 446 manufacturing workers and 278 managerial workers employed in Gumi industrial complex and the observation period was for 1 month(February to March), 1995. In this study, as a questionnaire for the assessment of work ability, we used the Work Ability Index(WAI) which was developed by Institute of Occupational Health in Finland. Major findings obtained from this study were as follows ; WAI was poor in lower economic condition, shift work, irregular diet group(p<0.05). There were no evident trends of WAS in sex, educational level, obesity index, exercise, smoking, and alcohol drinking. In the groups of sensitive to perception of stress, other industrial classification except textile and electronics, the more than 9 hours work, the evident trends of poor WAS were observed(p<0.01). In the groups of $30\sim39$ years old, $40\sim49$ years old, unmarried, high school, shift work, standard body weight, and regular .diet, WAI between manufacturing workers and managerial workers was significantly different(p<0.01) and WAI of managerial worker was worse than that of manufacturing worker.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.701-706
• /
• 2014

In these days, there have been numerous researches on nano and micro satellites under the slogan of "Faster, Smaller, Better, Cheaper". Since optical structure occupies large portion of satellite volume, research on deployable optical structure gains great attention to reduce total volume of the satellite. In this paper, we establish the requirement of deployable optical structure based on specification of conventional optical structure and propose two candidate mechanisms which can satisfy the degree of deployment precision. Then, in order to evaluate the degree of deployment precision, we carry out kinematic analysis on de-space among tilt, de-space and de-center which influences optical characteristic of a satellite.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.62-72
• /
• 2010

Solid oxide fuel cells(SOFCs) directly convert the fuel gases to electric energy through electrochemical reactions. The advantage of SOFCs is that they easily operate with diversified fuels such as natural gases owing to their high temperature operation. However, high temperature operation also incurs the challenge in enhancing long term reliability and durability of SOFCs. The most commonly used anode material is Ni/YSZ. This has, however, some drawbacks in terms of long-term reliability at high temperatures, hydrocarbon fuel usages, and so on, therefore the need to develop the new anode materials increases. This article summarizes the trend of the novel anode materials development of SOFCs.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.156-162
• /
• 2001

Novel pressure sensor using the resonance wavelength shift of single mode fiber-to-planar waveguide coupler, was demonstrated. It is found that the resonance wavelength shift due to refractive index variation of polymers by pressure occurs and its sensitivity depends on materials. We adopted symmetric structure of planar waveguide and remove the polarization dependence which is inevitable with side-polished fiber. AZ4562, AZl512 and THB-30 are used as planar waveguide materials and the resonance wavelength shifting by pressure was shown -0.008um/bar, 0.033nm/bar and 0.16nm/bar, respectively.