• Title/Summary/Keyword: 김대진

Search Result 644, Processing Time 0.033 seconds

Model-Fluid Full-Speed Test of a Turbopump for a 75 Ton Class Rocket Engine (75톤급 로켓엔진용 터보펌프의 실회전수 상사매질 시험)

  • Hong, Soonsam;Kim, Daejin;Kim, Jinhan
    • Journal of Aerospace System Engineering
    • /
    • v.7 no.4
    • /
    • pp.49-54
    • /
    • 2013
  • A turbopump for a 75 ton class liquid rocket engine was tested at full speed for 20 seconds using model fluid. Liquid nitrogen is used for the oxidizer pump, water for the fuel pump, and hot gas for the turbine. The non-cavitating head of pump from the turbopump assembly test showed a good agreement with that from the pump component test. The relative difference of turbine efficiency between the turbopump assembly test and the turbine component test was 0.3% only. Suction performance from the turbopump assembly test was higher than that of pump component test, which resulted from the thermodynamic effect of cavitation.

3D Depth Estimation by Using a Single Smart Phone Camera (단일 스마트폰 카메라를 이용한 3D 거리 추정 방법)

  • Bae, Chul Kyun;Ko, Young Min;Kim, Seung Gi;Kim, Dae Jin
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2018.06a
    • /
    • pp.240-243
    • /
    • 2018
  • 최근 VR(Virtual Reality)와 AR(Augmented Reality)의 발전에 따라 영상 또는 이미지에서 카메라와 물체 사이의 거리를 추정하는 기술에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 카메라와 물체 사이의 거리 추정 방법 중에서 단일 카메라를 이용하여 촬영한 이미지의 흐림 정도를 분석하여 3D 거리를 추정하는 알고리즘을 연구한다. 특히 고가의 렌즈가 장착된 DSLR 카메라가 아닌 스마트폰 카메라 이미지에서 DFD를 이용한 거리 추정 방법 중 1개의 이미지를 이용한 3D 거리 추정 방법과 초점이 서로 다른 2개의 이미지를 결합하여 3D 거리를 추정하는 방법을 연구하고 최적회된 피사체 범위에 대해 연구하였다. 한 개의 이미지를 이용한 거리 추정에서는 카메라의 초점 거리를 200 mm로 설정할 때, 두 개의 이미지를 이용한 거리 추정에서는 두 이미지의 초점 거리를 각각 150 mm, 250 mm로 설정했을 때 가장 넓은 거리 추정 범위를 갖는다. 또한, 두 거리 추정 방법 모두 초점 거리가 가까울수록 가까운 물체의 거리 추정에 효율적인 것으로 나타났다.

  • PDF

Research on the Design of TPO(Time, Place, 0Occasion)-Shift System for Mobile Multimedia Devices (휴대용 멀티미디어 디바이스를 위한 TPO(Time, Place, Occasion)-Shift 시스템 설계에 대한 연구)

  • Kim, Dae-Jin;Choi, Hong-Sub
    • Journal of the Korea Society of Computer and Information
    • /
    • v.14 no.2
    • /
    • pp.9-16
    • /
    • 2009
  • While the broadband network and multimedia technology are being developed, the commercial market of digital contents as well as using IPTV has been widely spreading. In this background, Time-Shift system is developed for requirement of multimedia. This system is independent of Time but is not independent of Place and Occasion. For solving these problems, in this paper, we propose the TPO(Time, Place, Occasion)-Shift system for mobile multimedia devices. The profile that can be applied to the mobile multimedia devices is much different from that of the setter-box. And general mobile multimedia devices could not have such large memories that is for multimedia data. So it is important to continuously store and manage those multimedia data in limited capacity with mobile device's profile. Therefore we compose the basket in a way using defined time unit and manage these baskets for effective buffer management. In addition. since the file name of basket is made up to include a basket's time information, we can make use of this time information as DTS(Decoding Time Stamp). When some multimedia content is converted to be available for portable multimedia devices, we are able to compose new formatted contents using such DTS information. Using basket based buffer systems, we can compose the contents by real time in mobile multimedia devices and save some memory. In order to see the system's real-time operation and performance, we implemented the proposed TPO-Shift system on the basis of mobile device, MS340. And setter-box are desisted by using directshow player under Windows Vista environment. As a result, we can find the usefulness and real-time operation of the proposed systems.

Development of 3D Chatting System Using VRML and Java WWW (WWW에서 VRML과 Java기반의 3차원 채팅 시스템 개발)

  • 지현상;남철희;김대진;이명원;최재희;김성국
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 1998.10a
    • /
    • pp.647-649
    • /
    • 1998
  • 최근 WWW상에서 VRML 기반의 3차원 가상공간 구현이 활발하게 진행되고 있다. 대부분의 시스템이 VRML기능의 한계로 인해 다수사용자의 참여와 사용자 상호작용 구현 기이 부족하다. 본 연구에서는 이러한 기능을 포함하는3차원 채팅시스템을 VRML과 Java를 이용하여 개발하였다. 다수 사용자 참여 기능은 Java를 이용하여 클라이언트/서버 시스템으로 구성하였으며 사용자 상호작용 기능은 3차원 가상공간을 걸어 다니는 효과 (walkthrough)를 제어하기 위한 인터페이스로서 EAI(External Authoring Interface)를 이용하여 구현하였다. 본 시스템에서 각 3차원 가상공간에서의 채팅 지원을 위해 여러개 서버를 둘 수 있도록 구성하여 사용자가 서버를 통해 채팅을 위한 가상공간을 추가 혹은 변경할 수 있도록 하였다.

  • PDF

Pspice Simulation For Traditional Music Monitoring Speaker Used Active Crossover Circuit (액티브 크로스오버 회로를 이용한 국악 음악 모니터링 스피커를 위한 Pspice 시뮬레이션)

  • Joo, Jung Hyun;Park, Huyng Do;Kim, Dae Jin
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.51-52
    • /
    • 2010
  • 최근 방송용 모니터링 스피커 시스템은 디지털 방송 기술과 반도체 기술의 급속한 발전에 힘입어 보다 질 좋은 오디오 앰프를 싼 가격과 소형화 기술을 적용하여 앰프와 스피커 매칭의 문제점을 안고 있는 패시브 크로스오버 사용의 멀티웨이 스피커를 대체하여 액티브 크로스 오버를 사용한 멀티 앰핑의 액티브 스피커로 진화 하고 있다. 방송 스튜디오에서 많이 사용되고 있는 2웨이 액티브 스피커를 모델로 국악콘텐츠 모니터링에 최적화된 액티브 모니터링 스피커 구현을 위한 크로스오버 회로를 설계하고 전자회로 시뮬레이션 프로그램인 Pspice를 이용하여 최적의 국악콘텐츠에 적용하기위한 크로스오버 주파수구현을 위한 소자 값들을 찾아내어 실제 제작회로에 적용 시 경비 절감과 개발시간을 단축 한다.

  • PDF

A Study of the TV Control Procedure by Smart Remote Control in DLNA Environment (DLNA 환경 속 스마트 리모컨의 TV 제어 절차에 관한 연구)

  • Kang, Ki Cheol;Kim, Dae Jin
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.43-46
    • /
    • 2010
  • 스마트 폰의 선풍적인 인기에 힘입어 TV 산업에서도 스마트TV가 출현해 시장 영역을 넓히고 있다. 이에 따라 TV 리모컨 또한 새로운 방식의 유저 인터페이스를 지원하는 하나의 스마트 리모컨으로 업그레이드 되고 있으며, 스마트 리모컨을 통한 홈 멀티미디어 디바이스의 통합 제어와 미디어 공유에 대한 여러 가지 시도가 이루어지고 있다. 이에 본 논문은 DLNA 환경 속 스마트 리모컨과 TV 디바이스의 역할에 대해 재 정의하고, 이를 기반으로 DLNA 및 UPnP 디바이스 아키텍처에 제시된 컨트롤 포인트와 디바이스 간 제어 및 미디어 공유 절차에 따라 스마트 리모컨을 통한 TV의 제어 기법을 제안한다. 제안된 스마트 리모컨을 통한 TV의 제어는, 크게 사용자와 무관한 백그라운드 스레드로 처리될 제어 준비 단계와 사용자의 입력을 통해 실질적인 제어를 수행하는 제어 단계로 나뉘고, 각각의 단계에 해당하는 UPnP 미디어 네트워크 단계에 맞춰 진행된다. 제안된 DLNA 환경 속 TV 제어 방법의 구현을 위해서는 선행적으로 TV OSD 제어를 위한 코드에 연동해 TV 디바이스 서비스 서술자의 확장이 이루어져야 할 것이다.

  • PDF

Design of Receiver in High-Speed digital Modem for High Resolution MRI (고속 디지털 MRI 모뎀 수신기 설계)

  • 염승기;양문환;김대진;정관진;김용권;권영철;최윤기
    • Proceedings of the IEEK Conference
    • /
    • 2000.06a
    • /
    • pp.69-72
    • /
    • 2000
  • This paper shows the more improved design of MRI receiver compared to conventional one based on Elscint Spectrometer. At first, the low-cost ADC is 16 bits, 3MHz sampling A/D converter Comparing to conventional one with signal bits of 14 bits, this device with those of 16 bits helps getting Improved the image resolution improved. If frequency is designed centering around 7.6 MHz to be satisfied in 10 MHz of maximum input bandwidth of ADC. For 1st demodulation, fixed IF is used for the purpose of the implementing multi nuclei system. Control parts & partial digital parts are integrated on one chip(FPGA). In DDC(Digital Down Converter), we got required bandwidth of LPF by controlling its decimation rate. With above considerations, we designed optimal receiver for high resolution imaging to be implemented through PC interface & experimental test of receiver of MRI after receiver's fabrication.

  • PDF

Design of Transmitter in High-Speed Digital Modem for MRI (MRI용 고속 디지털 모뎀의 송신기 설계)

  • 양문환;염승기;김대진;정관진;최윤기;김용권;권영철
    • Proceedings of the IEEK Conference
    • /
    • 2000.06a
    • /
    • pp.73-76
    • /
    • 2000
  • In tendency of digitalization, we studied about the purpose of digital modem for MRI spectrometer and advantage of digital modem compared with analog one. We introduce requirements lot designing transmitter of high speed digital modem for MRl spectrometer We also introduce its top-level and mid-level architecture. The transmitter is composed of CPC-P interface block, DUC & DAC block, RF block, master clock generation block, MCU block. Especially, DUC and its control parts are studied in detail. DUC and DAC can operate up to 52MHz and 100Msps, respectively. However we uses 35MHz as master clock and this paper shows its validity through simulations.

  • PDF

Sign Language Avatar System Based on Hyper Sign Sentence (하이퍼 수화문장을 사용한 수화 생성 시스템)

  • Oh Young-Joon;Park Kwang-Hyun;Jang Hyo-Young;Kim Dae-Jin;Jung Jin-Woo;Bien Zeung-Nam
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2006.05a
    • /
    • pp.621-624
    • /
    • 2006
  • 본 논문은 기존의 수화 발생 시스템이 갖는 처리 성능의 한계와 신체요소의 움직임에 대한 문제점을 지적하고, 이를 개선하기 위해 하이퍼 수화문장을 제안한다. 하이퍼 수화문장은 기존 수화문장의 구조를 확장하여 수화단어와 신체효소의 동작기호로 구성된 수화문장이다. 제안한 하이퍼 수화문장 생성 방법에 따라 하이퍼 수화어절을 연결하여 수화동작을 합성하고 수화문장에 대한 아바타의 움직임을 실제 수화자와 유사하게 생성하는 시스템을 보인다.

  • PDF

The design and implementation of an universal interface with serial and parallel formats for DTV transport stream (DTV 트랜스포트 스트림용 만능 직.병렬 인터페이스 설계 및 구현)

  • 유종언;장용석;고영욱;김대진;김은도
    • Proceedings of the IEEK Conference
    • /
    • 2001.09a
    • /
    • pp.323-326
    • /
    • 2001
  • DTV 방송 신호를 수신하거나 송신하는 장비의 경우 대부분 한두 가지 인터페이스 방식을 이용하여 서로 통신을 하고 있다. 따라서 서로 다른 인터페이스 포맷을 사용하여 스트림을 전송하는 경우 기존의 장비를 사용하지 못하는 경우가 많이 있다. 본 논문에서는 이런 장비들 사이에서 주고받는 스트림의 포맷을 자유로이 연결 가능하도록 해주는 인터페이스를 설계 및 구현하였다. 본 논문에서 구현한 인터페이스는 스트림 자체 내용은 변경하지 않고, 송·수신하기 위한 인터페이스 규격에 스트림을 적용하여 자유로이 송·수신할 수 있도록 하였다. 구현한 인터페이스 규격은 SMPTE 310M, ASI(Asynchronous Serial Inerface), SPI (Synchronous Parallel Interface)와 셋탑박스에서 사용하는 TS(Transport Stream)의 네 가지로 서로간에 송·수신 가능하도록 매트릭스 형태를 취하고 있다. 주요 블록은 YHDL 코딩을 이용하여 설계를 하였으며, FPGA(EPF10K10T144)를 사용하였다.

  • PDF