• 한국추진공학회지
• /
• 제20권3호
• /
• pp.78-86
• /
• 2016

본 논문은 가스터빈시스템에서 외부 유량의 섭동과 이에 따른 열발생의 섭동 사이의 관계를 표현하는 새로운 형태의 화염전달함수(flame transfer function))를 제안한다. 연소의 불안정성을 예측하기 위하여 그 동안 널리 이용되어 왔던 $n-{\tau}$ 모델과 본 논문에서 제안하는 모델과의 가장 큰 차이점은 주파수 변화에 따른 위상의 비선형적인 관계를 표현 할 수 있다는 점에 있다. 기존의 $n-{\tau}$ 모델의 경우 위상은 항상 주파수의 선형함수로 주어지는데 이는 실제 연소시스템의 실험에서 자주 관측되는 결과와 일치하지 않았다. 실험 결과를 바탕으로 새로운 화염전달함수 모델을 구성하였고 연소불안정성의 측면에서 위상의 비선형성이 미치는 영향에 관하여 분석하였다.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.26-31
• /
• 2006

An experimental investigation of an early injection strategy was conducted on a small single cylinder common-rail DI diesel engine to reduce the oxides of nitrogen($NO_x$) emission. The main objectives of this study were to investigate the emissions, performance and combustion characteristics in a diesel engine with early and two-stage injections. The two- stage injection was conducted to reduce the wall-wetting of early injected fuels on the cylinder wall or to promote the ignition of premixed charge. The engine test was performed at conditions of 1500rpm, injection timing ranging from TDC to BTDC $80^{\circ}$. The experimental results show that $NO_x$ emissions were decreased in both cases of early injection and two stage injection compared to the conventional diesel combustion by the near TDC injection. However, soot and products of incomplete products (i.e. HC and CO) are slightly increased. Also, the second injection near TDC promoted the ignition of premixed fuel, therefore, IMEP was increased.

• Tuberculosis and Respiratory Diseases
• /
• 제72권2호
• /
• pp.228-231
• /
• 2012

Bronchobiliary fistula (BBF), defined as an abnormal communication between the biliary duct and bronchial trees, is a very rare condition. Bilioptysis is a pathognomonic finding for BBF. We studied a 58-year-old man, who had a BBF complicated by liver biloma that occurred after radiofrequency ablation. The diagnosis was confirmed by the presence of bile-stained sputum and an Endoscopic Retrograde Cholangio-Pancreatography. BBF was treated successfully by endoscopic sphincterotomy and biliary drainage with insertion of a double pig-tail plastic stent into the biloma. We suggest that the optimal choice of treatment modality for BBF depends on the natural course of the underlying disease, and the status of the biliary stricture.

• Composites Research
• /
• 제14권4호
• /
• pp.15-26
• /
• 2001

Implant용 bioabsorbable 복합재료의 계면물성과 미세파괴분해 메카니즘을 micromechanical 시험법과 음향방출을 이용하여 평가하였다. Poly(ester-amide)와 bioactive 유리섬유의 인장 강도와 탄성률 그리고 연신율은 분해시간에 따라 점차적으로 감소하는 경향을 보인 반면, chitosan 섬유는 분해시간 내에서 거의 변화가 없었다. Dual matrix composite 시험법을 이용하여 측정된 bioactive 유리섬유와 poly(L-lactide) 사이의 계면전단강도는 chitosan이나 poly(ester-amide) 섬유의 경우 보다 큰 값을 보였다. 그리고 계면전단강도 감소는 bioactive 유리섬유 강화 poly(L-lactide) 복합재료에서 가장 빨랐으며, chitosan 섬유의 경우가 상대적으로 가장 느린 경향을 보였다. Poly(ester-amide) 섬유의 분해시간에 따른 음향방출 진폭과 에너지는 점차로 감소하였고, 음향방출 진폭의 분포 역시 점차 좁아짐을 보여주었다. Bioactive 유리섬유에서 인장파단에 의한 음향방출 진폭과 에너지는 압축파단의 경우 보다 크게 나타났으며, 또한, 인장 및 압축시험 모두에서 초기상태가 분해 후 보다 더 큰 값을 보였다. 본 연구에서 평가한 계면물성과 미세파괴분해 메카니즘은 생흡수성 복합재료의 성능을 조절할 수 있는 중요한 요소가 될 것이다.

• Composites Research
• /
• 제16권4호
• /
• pp.74-79
• /
• 2003

Micromechanical 시험법과 음향방출을 이용하여 산소 플라즈마 처리된 PBO와 Kevlar 섬유강화 에폭시 복합재료의 계면물성과 미세파괴메카니즘을 고찰하여 상호 비교하였다. 산소 플라즈마 처리된 PBO와 Kevlar 섬유강화 에폭시 복합재료의 계면전단강도와 접착일은 극성 작용기의 도입으로 향상 시킬 수 있었다. 임계표면장력과 총 표면자유에너지 중 극성 표면자유에너지는 플라즈마 처리된 Kevlar 섬유에서 가장 컸으며. 미처리된 PBO의 섬유의 경우에서 가장 작았다. Microfibril 파단 형상은 산소 플라즈마 처리된 Keviar 섬유의 경우에서는 명확하게 관찰 되었으며. 미처리와 비교차여 microfibril 파단이 대각선 방향으로 연속적해서 일어나 가장 많은 섬유 파단 신호가 감지되었다 비파괴 음향방출법을 이용하여 얻은 섬유파단 감지 결과는 microdroplet과 두 섬유강화 복합재료 시험법에서 광학현미경을 이용하여 관찰한 미세파단 형상과 상호 일치하였다.

• 대한임상검사과학회지
• /
• 제47권4호
• /
• pp.188-193
• /
• 2015

경동맥 내중막 두께는 뇌혈관질환과 관상동맥질환을 정밀하게 측정하는 검사이다. 많은 선행논문에 따르면 경동맥 내중막 두께는 죽상동맥경화를 예측하고 심혈관질환의 위험인자와 연관성이 높으며, 심근경색이나 뇌졸중 발생 위험을 예측할 수 있는 독립인자로 연구되었다. 따라서 본 연구는 혈액검사 중 임상화학적 검사결과와의 상관관계 연구를 통해 경동맥 내중막 두께와 다른 독립인자를 확보하는 것이 목적이었다. 연구결과 피험자의 부족으로 인해 심혈관계관련 임상화학적 요인과는 상관관계를 입증하지 못했으나, 경동맥 내중막 두께와 ALT (p<0.05), GGT (p<0.05), Uric acid (p<0.05), CEA (p<0.05)와 양의 상관관계를 통계적인 유의수준으로 입증하여 지속적인 연구의 문제를 제기하였다.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.645-651
• /
• 2014

GaN is most commonly used to make LED elements. But, due to differences of the thermal expansion coefficient and lattice mismatch with sapphire, dislocations have occurred at about $109{\sim}1010/cm^2$. Generally, a low temperature GaN buffer layer is used between the GaN layer and the sapphire substrate in order to reduce the dislocation density and improve the characteristics of the thin film, and thus to increase the efficiency of the LED. Further, patterned sapphire substrate (PSS) are applied to improve the light extraction efficiency. In this experiment, using an AlN buffer layer on PSS in place of the GaN buffer layer that is used mainly to improve the properties of the GaN film, light extraction efficiency and overall properties of the thin film are improved at the same time. The AlN buffer layer was deposited by using a sputter and the AlN buffer layer thickness was determined to be 25 nm through XRD analysis after growing the GaN film at $1070^{\circ}C$ on the AlN buffer CPSS (C-plane Patterned Sapphire Substrate, AlN buffer 25 nm, 100 nm, 200 nm, 300 nm). The GaN film layer formed by applying a 2 step epitaxial lateral overgrowth (ELOG) process, and by changing temperatures ($1020{\sim}1070^{\circ}C$) and pressures (85~300 Torr). To confirm the surface morphology, we used SEM, AFM, and optical microscopy. To analyze the properties (dislocation density and crystallinity) of a thin film, we used HR-XRD and Cathodoluminescence.

• 농촌계획
• /
• 제16권3호
• /
• pp.43-49
• /
• 2010

This study generalized and systemized the unit-project items of 176 project districts for the rural village comprehensive development projects (RVCDP). This paper surveyed opinions of III answerers (7 specialists, 43 agents of Korea Rural Community corporation, and 61 agents of local government of cities and counties) in order to determine the classification system and their corresponding weighting values of the project items using analytic hierarchy process (AHP) method. From the results extracted by project plans of 176 project districts for 5 years from 2004 to 2008, this study decided a hierarchical system for unit-project items of RVCDP by AHP method, which consisted of three steps: 4 items for 1st step, 13 items for 2nd step, and 52 items for 3rd step. The first step contains 4 items of Strength of Rural-urban Exchange & Regional Capability (RURC), Green-income Infrastructure & Facility (GIF), Culture-health-welfare Facility, and Eco-environment & Landscape facility (ELF). In the survey of weighting values with AHP method, the analysis result for the first step showed that in opinion of specialists, GIF is more important than the others while in opinion of the other agents, RURC is more important. In the second step, Product Facility is more important in the specialists, whereas Strength of Resident Capability is the most important in the other agents. Analyzed unit project items as the third step, all answerers evaluated that the Education and Excursion for Rural Resident Capability has the highest weighting values.

• 농촌계획
• /
• 제13권2호
• /
• pp.7-16
• /
• 2007

This study aims to develop an evaluation method of green-tourism potential in village level with amenity resources of rural villages, considering human resources of the village. The amenity resources evaluation system was classified into three sub-classes with social, industrial, and natural resources. The system consisted of a relationship diagram between three classes resources and tourists' behavior. The new methodology considers human resources as a key factor for green-tourism potential evaluation of villages, including the amenity resources of three sub-classes. In quantitative method for the criteria, this study adopted a new method of continuous linear score method, which is applying fuzzy theory, not to give score with the existing discrete scoring method with several steps. The weighting values of the evaluation criteria were calculated from the step wise pair-comparision results by AHP(Analytic Hierachy Process) method, which industrial, natural, and social resources have relative weighting values of 523/1000, 319/1000, and 158/1000, respectively. In evaluation of another weighting value by the same methodology, the results showed that the amenity and the human resources have weighting values of 627/100 and 373/1000, respectively. The new evaluation method was applied to make the potential evaluation for rural villages of the study area, which located on Narial-myun, Keumsan-gun, Chungnam province. The development priority among the villages could be suggested reasonably by the new findings of this study, according to the evaluation results showing that the village with high possibility for development in green-tourism has high score in the potential evaluation.

• 한국농공학회논문집
• /
• 제60권2호
• /
• pp.111-119
• /
• 2018

The purpose of this study is to analyze the changes of rural development policies in the last 20 years by analyzing the budget distribution by policy objectives and support factors. 1997, 2000, 2005, 2010 and 2015 Guidelines of Agricultural, Food and Rural Development Project were analyzed to identify the budget distribution. The objectives of rural development policy were classified into 5 fields and 27 detailed factors such as production environment, distribution environment, technology and human resources, living environment, income support. The support factors of rural development policy were classified into 3 fields and 17 detailed factors. The budget of rural development policy has greatly increased from 952,297 million won in 1997 to 4,869,174 million won in 2010 and 3,905,340 million won in 2015. In budget distribution by policy objectives, the policy was mainly focused on management funding in 1997, 2000 and in the 2000s, it was confirmed that investment in the improvement of the living environment was rapidly taking place. In budget distribution by policy support factors, it was found that living environment and welfare environment support factor in rural area occupied the largest portion and welfare, tourism, and living environment has been rapidly increasing since 2005.