• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.111-111
• /
• 2018

본 연구의 목적은 조건부 합성 기법(Conditional Merging, CM) 기법을 활용하여 GPM(Global Precipitation Measurement) 위성 자료를 보정하고, 이를 격자기반 분포형 강우-유출 모형(KIneMatic wave STOrm Runoff Model2, KIMSTORM2)에 적용하여 보정된 자료의 효율성을 검토하는데 있다. 모형의 유출 해석은 남강댐 유역($2,293km^2$)을 대상으로 하였으며, 2016년 10월에 발생한 태풍 차바에 대하여 GPM 자료와 CM 기법을 적용한 GPM 자료를 각각 활용하여 결과를 비교하였다. 이 때, 강우자료의 보정은 유역 내 위치한 21개 지점의 지상강우자료를 활용하였으며, 각각의 위성강우자료에 유출 검보정은 남강댐 유역 내 3개의 수위관측 지점(산청, 창촌, 남강댐)을 대상으로 실시하였다. 유출 결과는 결정계수(Coefficient of determination, $R^2$), 모형 효율성 계수(Nash-Sutcliffe efficiency, NSE) 및 유출용적지수(Volume conservation index, VCI)를 이용하여 산정하였다. 지상강우자료와 CM 기법을 통해 보정한 강우자료는 대기의 많은 영향을 받는 위성자료의 특성을 보정하여 공간유출 및 첨두유출을 합리적으로 재현할 수 있을 것으로 예상된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1575-1581
• /
• 2005

Recently, further study is being done on the affect of crack on concrete structure and many people have made every endeavor not to leave it unsettled but to minimize it by repair works. In this paper we propose the image processing method that do not remain manual but automatically process the length, the direction and e width of cracks on concrete surface. First, we calibrate light's affect from image by using closing operation, one of morphology methods that can extract the feature of oracle and we extract the edge of crack image by sobel mask. After it, crack image is binarized by iteration binarization. And we extract the edge of cracks using noise elimination method that use an average of adjacent pixels by 3${\times}$3 mask and Glassfire Labeling algorithm. on, in this paper we propose an image processing method which can automatically measure the length, the direction and the width of cracks using the extracted edges of cracks. The results of experiment showed that the proposed method works better on the extraction of concrete cracks. Also our method showed the possibility that inspector's decision is unnecessary.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.143-153
• /
• 2002

The bonded orthodontic retainer constructed from composite and multistrand orthodontic wire provides an esthetic and efficient system for maintained retention. This study was designed to measure shear bond strength of bonded retainers and to suggest a optimal combination of a multistrand wire and bonding method used when bonded retainer was fabricated. 160 sound maxillary and mandibular premolars were used for 80 test samples. After Uniformizing bonding area, length of wire, and thickness of composite, multistrand wire was bonded to fabricated a bonded retainer by direct or indirect bonding method. Shear bond strength and extension length of each sample were measured by a universal testing machine. The results of this study were as follows : 1. In vitro shear bond testing found 6-stranded, 0.0155 inch wires to have the largest shear bond strength and 3-stranded, 0.0195 inch wires to have the least shear bond strength. But, These difference was not statistically significant(p<0.05). 2. In vitro extension testing found 3-stranded, 0.0155 inch wires to have the largest extension length and 3-stranded, 0.0195 inch wires to have the least extension length(p<0.05). The larger diameter wire was used, the larger extension length was shown. But, the strand of wire is not related to the extension length of wire. 3. In comparison with direct bonding method, larger shear bond strength and extension length was shown in indirect bonding method(p<0.05).

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2180-2183
• /
• 2003

본 논문에서는 광 디스크의 기록 밀도 증가에 따른 신호품질의 열화나 노이즈가 심한 환경에서 DPLL(Digital Phase Locked Loop)의 성능을 개선하기 위한 FD(Frequency Detector)와 PD(Phase Detector) 알고리즘을 제안한다. 제안된 PD 알고리즘은 노이즈에 의해 왜곡되어 RLL 조건을 위배하는 입력신호, 즉 RLL 조건에 의해 결정되는 최소 런 길이보다 주기가 작은 신호에 의해 발생하는 위상오차를 위상오차 보정 시 사용하지 않도록 설계하여 잘못된 정보에 의한 위상오차 보정이 일어나지 않도록 하였다 제안된 FD 알고리즘은 주파수를 추적하기 위해 삽입되는 신호인 Sync 신호의 symmetry 특성을 이용하여 샘플패턴을 검출하도록 하여 기존의 주파수 오차 보정 알고리즘보다 향상된 주파수 추적 성능을 가지도록 하였다.

• 대한핵의학회:학술대회논문집
• /
• 1990.04a
• /
• pp.201.2-202
• /
• 1990

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.68-75
• /
• 2017

Dual bell nozzle is a type of altitude compensation nozzle, which is a nozzle that minimize the losses of the specific impulse at the off-design point of a typical bell nozzle. In this paper, numerical computations are performed to understand the transition characteristics of dual bell nozzles with fixed expansion ratios. The major design variables are the length of extension and the angle of inflection. As the length of the extension increased, the transition altitude and transition duration increased and the reduction of the thrust coefficient decreased. As the angle of inflection increased, the transition altitude and transition duration decreased and the reduction of the thrust coefficient increased.

• Journal of Aerospace System Engineering
• /
• v.12 no.6
• /
• pp.41-49
• /
• 2018

In this study, the theoretical dynamic characteristics of a thin-walled composite beam with a single-cell of chordwise asymmetric cross-section was studied. Mathematical modeling was done by considering the transverse shear effects, the warping restraint effects, the constant taper ratio in the longitudinal direction of the beam, and the geometrical cross-section ratio. The mass coefficients, stiffness coefficients, and Eigen frequencies of the selected section were investigated. In particular, the effects of the taper ratio and cross-section ratio of the model on the Eigen frequencies were analyzed and compared when the asymmetry of the section was considered and the warping function was not corrected.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.844-854
• /
• 2017

The Expansion-Deflection(E-D) nozzle is a nozzle that has a performance gain through the altitude compensation effect by changing the effective area within the nozzle according to the altitude. An E-D nozzle has been known to reduce the length of the nozzle and achieve the payload gain of the launch vehicle. Due to the potential advantages of an E-D nozzle, related research has been carried out in the United Kingdom, Germany, Australia and Europe etc. In the UK, the flow characteristics of the E-D nozzle and the performance comparison with the dual-bell nozzle which is altitude compensation nozzle were studied. In order to understand the transition characteristics of the E-D nozzle in DLR, the transition characteristics according to the nozzle pressure ratio change were analyzed. In Europe, numerical study using the E-D nozzle concept on upper stage of the launch vehicle Ariane 5 ESC-B was carried out to confirm the possibility of payload gain according to the nozzle length reduction. In this paper, research trends of an E-D nozzle performed outside the country are classified and analyzed according to their characteristics and utilized as basic data of E-D nozzle research in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.527-531
• /
• 2004

본 연구에서는 미국 환경청에서 개발하여 유역 오염총량관리를 위한 수질모형으로 이용되고 있는 HSPF 모형을 선정하여 발안 $HP\#6$ 시험유역을 내상으로 모형의 적용성을 분석하였다. HSPF 모형을 이용하여 $HP\#6$ 시험유역에서 모형의 보정기간인 1996년부터 1997년까지 유출량을 모의한 겉과, RMSE는 2.1mm, RMAE는 0.4mm, $R^2$는 0.92로 모의되었으며, 모형의 검정기간인 1999년부터 2000년의 모의 길과 RMSE는 6.03mm, RMAE는 0.49mm, $R^2$는 0.84로 모의되었다. 총질소에 대한 모형의 보정결과 RMSE는 0.086kg/ha/day, RMAE는 0.534kg/ha/day, $R^2$는 0.812로 나타났으며, 모형의 검정결과 RMSE는 0.326kg/ha/day, RMAE는 0.708kg/ha/day, $R^2$는 0.427로 분석되었다. 총인에 대한 모형의 보정결과 RMSE는 0.0117 kg/ha/day, RMAE는 0.622kg/ha/day, $R^2$는 0.70으로 모의되었으며, 모형의 검정결과 RMSE는 0.063kg/ha/day, RMAE는 2.269kg/ha/day, $R^2$는 0.756으로 분석되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.145-145
• /
• 2015

본 연구에서는 SWAT(Soil and Water Assessment Tool) 모형을 이용하여 고랭지 농업 지역인 해안분지유역($63km^2$)을 대상으로 RCP 기후변화 시나리오에 따른 미래 수문순환 전망을 평가하였다. 모형의 보정(2009년-2010년) 및 검증(2011년)은 3지점의 실측된 유출량을 활용하여 실시하였다. 모형의 보정 및 검증 결과 결정계수($R^2$)는 X.XX-X.XX이고, Nash-Sutcliffe 모형 효율(NSE)는 X.XX-X.XX으로 분석되어 신뢰성 있는 유출량 모의 결과를 나타내었다. 미래 기후변화 시나리오는 기상청에서 제공하는 HadGEM3-RA 모형의 RCP 4.5 및 8.5 자료를 수집하였다. 다음으로 과거 13년(1999년-2011년, Baseline period)의 기상자료를 기준으로 편이보정(Bias Correction)기법을 이용하여 오차보정 후, SWAT 모형에 적용하여 2040s(2020년-2059년) 및 2080s(2060년-2099년) 기간에 대해서 분석하였다. 그 후, 수문요소인 증발산, 토양수분, 지표유출, 중간유출, 회귀유출 및 하천유출량의 변화량을 분석하여 고랭지 농업 유역의 기후변화에 따른 미래 수문순환을 전망하였다.