• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.115-121
• /
• 2017

The present study aimed to obtain basic knowledge of a customized artificial joint based on the convergence research of Digital Imaging and Communications in Medicine(DICOM) and 5-axis machining technology. In the case of the research method, three-dimensional modeling was generated based on the medical image of the humerus bone, and the shape was machined using a chemical wood material. Then, the anatomical characteristics and the modeling machining computation times were compared. The results showed that the Stereolithography (STL) modeling required twice more time for semi-finishing and 10 times more time for finishing compared to the Initial Graphics Exchange Specification(IGES) modeling. For the 5-axis machining humerus bone, the anatomical structures of the anatomic neck, greater tubercle, lesser tubercle, and intertubercular groove were similar to those in the three-dimensional medical image. In the future, the convergence machining technology, where 5-axis machining of various structures(e.g., the surgical neck undercut of the humerus bone) is performed as described above, can be efficiently applied to the manufacture of a customized joint that pursues the precise model of a human body.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.149-162
• /
• 2005

This paper suggest a way to detect a specific wanted figure in public places such as subway stations and banks by comparing color face images extracted from the real time CCTV with the face images of designated specific figures. Assuming that the characteristic of the surveillance camera allows the face information in screens to change arbitrarily and to contain information on numerous faces, the accurate detection of the face area was focused. To solve this problem, the normalization work using subsampling with $20{\times}20$ pixels on arbitrary face images, which is based on the Perceptron Neural Network model suggested by R. Rosenblatt, created the effect of recogning the whole face. The optimal linear filter and the histogram shaper technique were employed to minimize the outside interference such as lightings and light. The addition operation of the egg-shaped masks was added to the pre-treatment process to minimize unnecessary work. The images finished with the pre-treatment process were divided into three reception fields and the information on the specific location of eyes, nose, and mouths was determined through the neural network. Furthermore, the precision of results was improved by constructing the three single-set network system with different initial values in a row.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.87-95
• /
• 1996

A new design scheme for the fuzzy pattern matching classifier (FPMC) is proposed. in conventional design of FPMC, there are no exact information about the membership function of which shape and number critically affect the performance of classifier. So far, a trial and error or heuristic method is used to find membership functions for the input patterns. But each of them have limits in its application to the various types of pattern recognition problem. In this paper, a new method to find the appropriate shape and number of membership functions for the input patterns which minimize classification error is proposed using genetic algorithms(GAs). Genetic algorithms belong to a class of stochastic algorithms based on biological models of evolution. They have been applied to many function optimization problems and shown to find optimal or near optimal solutions. In this paper, GAs are used to find the appropriate shape and number of membership functions based on fitness function which is inversely proportional to classification error. The strings in GAs determine the membership functions and recognition results using these membership functions affect reproduction of next generation in GAs. The proposed design scheme is applied to the several patterns such as tire tread patterns and handwritten alphabetic characters. Experimental results show the usefulness of the proposed scheme.

• Journal of Environmental Policy
• /
• v.12 no.3
• /
• pp.123-159
• /
• 2013

We use a multi-regional dynamic computable general equilibrium model to explain an economic effect of $CO_2$ tax on the national and regional economy of Korea. First, we compare two $CO_2$ taxes: a region-specific $CO_2$ tax and a uniform $CO_2$ tax. In the region-specific tax, the $CO_2$ tax rate in the capital area and the south-eastern region is much greater than those in other regions. GDP loss resulting from the region-specific tax is bigger than that in the uniform tax. Second, we consider three options for tax recycling: consumption tax recycling, labor-income tax recycling, and corporate-income tax recycling. The corporate-income tax recycling has the least GDP-loss effect over the three options. These results support that it is more efficient to use a uniform $CO_2$ tax rate than a region-specific $CO_2$ tax rate and that the corporate-income tax recycling is more desirable in a sense of efficiency than the consumption and labor-income tax recycling options.

• Economic and Environmental Geology
• /
• v.48 no.5
• /
• pp.391-400
• /
• 2015

Korea is a global steel producer and a major consumer while iron ore producing is very low compared to the demand. On the other hand, North Korea holds tremendous amount of iron reserves and, however, its producing rate is limited. Moreover, the data regarding mineral resources of North Korea is very limited and uncertain because of political isolation. This study estimated the amount of iron ore resource and production amount for the Musan Iron mine, the world-known open-pit mine of North Korea, using satellite imagery(Landsat MSS, ASTER) and digital maps between 1976 to 2007. As a result, the mining area of Musan mine was increased by $6.1km^2$ during the 30 years and the mining sector was estimated as $4.9km^2$. We estimated the iron resources and production amount of 0.7 and 0.2 billion metric tons, respectively based on 3D modeling and average iron ore density of Anshan formation in China. This amount indicates 8.1 million tons of annual average production and it coincides well with previous reports. We expect this study would be utilized significantly on inter-Korean exchange programs by providing trustable preliminary data.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.70-78
• /
• 2000

In this study, a new method for canceling MRI artifacts through the motion translation of image plane is presented Breathing often makes problems in a clinical diagnosis. Assuming that the head moves up and down due to breathing, rigid translational motions in only y(phase encoding axis) direction are treated Unlike the conventional Iterative phase retrieval algorithm, this method is based on the MRI imaging process and analyzing of Image property A new constraint condition with which the motion component and the true image component in the MRI signal can be separated by a simple algebraic operation is extracted After the x(read out) directional Fourier transformation of MRI signal is done, the y(phase encoding) directional spectrum phasing value is Just an algebraic sum of the Image component and the motion component Meanwhile, as It is known that the density of subcutaneous fat area is almost uniform in the head tomographs, the density distribution along a y directional line on this fat area is regarded as symmetric shape If the density function is symmetric, then the phase of spectrum changes linearly with the position Hence, the departure component from the linear function can be separated as the motion component Based on this constrant condition, the new method of artifact cancellation is presented Finally, the effectiveness of this algorithm IS shown by using a phantom with simulated motions.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.73-80
• /
• 2002

본 연구는 U자형 생산라인(U라인)에서의 라인밸런싱 문제를 해결하기 위한 유전알고리즘을 제시한다. U라인에서는 사이클 타임 내에 제품이 들어가는 방향과 나오는 방향의 작업을 한 작업자가 수행 할 수 있어서, 재공품 수량을 일정하게 유지한다거나 작업부하를 평활화 하는 등의 라인관리가 기존 직선라인에 비해 용이하다. U라인은 JIT(Just-ln-Time)생산 시스템에서 흔히 볼 수 있다. 본 연구는 U라인에서 사이클 타임이 고정되었을 때 작업장 또는 작업자의 수를 최소로 하면서 동시에 작업장에 할당된 작업들 간의 관련성을 최대화하는 라인밸런싱 문제를 다루었다. 라인밸런싱에 관한 기존 연구는 대부분 직선라인에 관한 것으로 U라인의 장점을 충분히 활용하지 못한다. 특히, 라인의 작업장의 수를 최소화하는 문제는 많은 대안해가 있음에도 불구하고, 작업관련성을 고려하여 해를 구하는 기법에 관한 연구는 아직 미미한 실정이다. 실제 조립라인에서는 가능한 한 관련된 작업들을 동일한 작업자에 할당하는 것이 바람직하며, 이러한 작업편성은 작업자의 작업능률을 향상시킬 수 있다. 유전알고리즘은 자연계의 적자생존과 생물학적 진화과정을 모방한 탐색기법으로 조합최적화 문제에 효과적인 기법으로 널리 알려져 있다. 본 연구는 유전알고리즘을 이용하여 U라인에서 작업관련성을 고려한 라인밸런싱 문제를 해결하기 위한 기법을 개발하였다. 문제의 목적에 적합한 개체의 평가함수가 제시되었으며, 개체의 형질을 효과적으로 자손에 유전할 수 있고 유전 연산이 용이한 개체의 표현방법과 개체의 해석방법이 제시되었다. 컴퓨터 실험을 통하여 개발한 알고리즘의 성능을 보였다.월 초순부터 중순에 각각 최고 성기를 나타내었다. H. papariensis의 암컷과 수컷의 발광양상을 분석하고자 정지발광과 구애 발광을 구분하여 조사하였고 각각의 발광지속시간과 발광주기를 구분하여 측정하였다. 수컷의 발광지속시간은 정지발광(0.12초)보다 구애발광(0.17초)에서 1.4배 증가하였으며 암컷의 발광지속시간은 정지발광(0.15초)보다 구애발광(0.19초)에서 1.5배 증가하였다. 발광주기는 수컷에서 정지발광(1.26초)보다 구애발광(1.12초)에서 0.88배 감소하였고, 암컷에서 정지발광(2.99초)보다 구애발광(1.06초)에서 0.35배 감소하였다. 발광양상에서 발광주파수는 수짓의 정지발광에서 0.8 Hz, 수컷 구애발광에서 0.9 Hz, 암컷의 정지발광에서 0.3 Hz, 암컷의 구애발광에서 0.9 Hz로 각각 나타났다. H. papariensis의 발광파장영역은 400 nm에서 700 nm에 이르는 모든 영역에서 확인되었으며 가장 높은 첨두치는 600 nm에 있고 500에서 600 nm 사이의 파장대가 가장 두드러지게 나타났다. 발광양상과 어우러진 교미행동은 Hp system과 같은 결과를 얻었다.하는 방법을 제안한다. 즉 채널 액세스 확률을 각 슬롯에서 예약상태에 있는 음성 단말의 수뿐만 아니라 각 슬롯에서 예약을 하려고 하는 단말의 수에 기초하여 산출하는 방법을 제안하고 이의 성능을 분석하였다. 시뮬레이션에 의해 새로 제안된 채널 허용 확률을 산출하는 방식의 성능을 비교한 결과 기존에 제안된 방법들보다 상당한 성능의 향상을 볼 수 있었다., 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.585-592
• /
• 2005

One of the most important things in the researches on diseases is to attach more importance to prevention of a disease and preservation of health than to treatment of a disease, also to foods rather than to medicines. In this context, the most significant concern in examining a patient is to find the presence of disease, and, if any, to diaguose the type of disease, after which a pharmacotherapy is followed. In this paper, various diagnosis methods of Oriental medicines are discussed. And ocular inspection, the most important method among the 4 disease diagnoses of Oriental medicines, is studied. Observing a person's shape and color has been the major method for ocular inspection, which usually has been dependent upon doctor's intuition as of these days. We are developing an automatic system which provides objective basic data for ocular inspection. As the first stage, we applied the signal processing techniques to automatic feature extraction of faces for ocular inspection. Firstly, facial regions are extracted from the point of frontal view, which was followed by extraction of their features. The experiment applied to 20 persons showed that frontal face regions are perfectly extracted, as well as their features, such as eyes, eyebrows, noses and mouths. Future work will seek to address the issues of morphological operation for a few unfinished extraction results, such as combined hair and eyebrows.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.65-73
• /
• 2002

It has been recognized that the damage control must become a more explicit design consideration. In an effort to develop design methods based on performance it is clear that the evaluation of the nonlinear response is required. The methods available to the design engineer today are nonlinear time history analyses, monotonic static nonlinear analyses, or equivalent static analyses with simulated nonlinear influences. Some building codes propose the capacity spectrum method based on the nonlinear static analysis(pushover analysis) to determine the earthquake-induced demand given by the structure pushover curve. These procedures are conceptually simple but iterative and time consuming with some errors. This paper presents a nonlinear direct spectrum method(NDSM) to evaluate seismic performance of structures, without iterative computations, given by the structural initial elastic period and yield strength from the pushover analysis, especially for MDF(multi degree of freedom) systems. The purpose of this paper is to investigate the accuracy and confidence of this method from a point of view of various earthquakes and unloading stiffness degradation parameters. The conclusions of this study are as follows; 1) NDSM is considered as practical method because the peak deformations of nonlinear system of MDF by NDSM are almost equal to the results of nonlinear time history analysis(NTHA) for various ground motions. 2) When the results of NDSM are compared with those of NTHA. mean of errors is the smallest in case of post-yielding stiffness factor 0.1, static force by MAD(modal adaptive distribution) and unloading stiffness degradation factor 0.2~0.3.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.157-179
• /
• 2019

The Seoul's 2030 Youth-Housing has been regarded as the only option to procure rental housing sites in downtown Seoul. But its supply did not catch up with the initial expectation, and the criticism that it may disrupt the current zoning system of the city has persisted. Consequently, the 2030 Youth-Housing policy has undergone amendments for six times within the last three years, and the significant changes in its guideline also have been made within the last one year. The study, in this context, tries to figure out the tendencies of those changes made in the guidelines so far by analyzing the aspects of the parcels allowable for Youth-Housing as well as the areas allowable for up-zoning. In the process, the propositional logic is to be adopted to draw the scope of the buildable areas for Youth-Housing. For this, the study refines the raw GIS data, inputs the values for each proposition, and proceeds the logical operation to judge every parcel of the city to discern whether it is eligible for a buildable site and/or for up-zoning for Youth-Housing. It is seen that: 1) the buildable sites rather evenly distribute around the peripheral subway-station areas while more concentrating on the quasi-residential and commercial areas; and 2) the areas eligible for up-zoning have the tendency to concentrate more on quasi-residential areas than others.