• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.90-93
• /
• 2005

경상남도 합천군과 창녕군 생활용수 지하수 관정 개발시 지하수 굴착공종으로부터 얻어진 구간별 지층자료와 대수층 수질 자료를 획득하여 이용하는 방법을 연구하였다. 지층정보를 파악하기 위하여 지하수공 굴착심도 10m마다 슬라임을 채취하였으며, 대수층 관통시에 지하수 시료를 구간별로 채수하여 전기전도도 및 수질시료를 분석하였다. 경도가 높은 지역의 경우, 음용수 수질기준치에 적합한 지하수를 개발하기 위해서 대수층별 전기전도도를 분석측정하여 경도를 간접적으로 파악함으로써 지하수 굴착심도 결정에 이용하였다. 그리고 대수층 구간별 불소 농도를 파악하였으며, 불소 농도가 높은 대수층 구간에서는 하부대수층 메움 등을 실시하였다. 대수층의 수질검사결과에서 기준치를 초과하는 우려 인자들(불소, 경도, 증발잔류물, 질산성 질소, 철, 알루미늄, 아연 등)에 대한 수질기준 초과 가능성을 대비한 양수시험 모니터링을 설계함으로써 지하수공의 수질 특성 파악이 가능하였다. 양수시험과정에서 탁도가 시간에 따라 기준치 이하까지 감소하는 일반적인 경향과 기준치 이상에서 더 이상 감소하지 않는 경향에 대한 원인을 분석할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.179-183
• /
• 2010

본 연구는 낙동강 중류 지역의 경북 구미시, 경북 왜관읍, 경북 성주군과 하류 지역의 경남 함안군, 창원시 북면과 대산면, 김해시 생림면의 하성충적층 내 지하수와 낙동강물의 연관성을 파악하였다. 중류와 하류지역에서 하성충적층의 주 대수층(모래자갈층)의 두께는 10m 내외로서 공간적으로 큰 차이를 보이지는 않는다. 하성충적층의 수리전도도는 $10^{-5}{\sim}10^{-3}$m/sec를 나타낸다. 하성충적층의 지하수위는 지역에 따라 해수면 기준으로 1.40~11.5m에서 변동하며, 지하수위와 낙동강 수위는 높은 상관성을 보인다. 지하수와 낙동강물의 화학분석 결과, 칼슘, 마그네슘, 나트륨, 칼륨, 염소, 규산, 중탄산, 망간, 철과 같은 무기성분의 농도는 지하수에서 더 높게 나타나고 있으나, 질산염의 농도는 낙동강물에서 더 높게 나타난다. 지하수내의 유기물질의 농도는 계절에 관계없이 비교적 일정하나, 낙동강물의 유기물질 농도는 우기보다 건기에 더 높은 경향성을 보이고 있다. 이러한 연구결과는 4대강 살리기 사업이나 하천주변지역의 수자원 개발에 활용될 수 있을 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.384-384
• /
• 2013

본 연구에서는 e-beam 증착을 이용하여 Al, Mg 단일 금속으로 다층형 Al-Mg 코팅층을 제조하여 특성 분석 및 내식성을 평가하였다. Al-Mg 코팅층은 99.99%의 Al, 99.9%의 Mg grain을 사용하여 E-Beam 가열을 통해 냉연강판 위에 코팅하였다. 증발물질과 기판과의 거리는 48 cm이며, 기판은 세척을 실시한 후 진공 챔버에 장착하고 ~10-5 Torr 까지 진공배기를 실시하였다. 진공챔버가 기본 압력까지 배기되면 아르곤 가스를 주입하고 기판홀더에 800 V의 직류 전압을 인가하여 약 30분간 글로우 방전 청정을 실시하였다. 기판의 청정이 끝나면 아르곤 가스를 차단하고 코팅층의 구성형태에 따라 Al 또는 Mg을 코팅하였다. 다층형 Al-Mg 코팅층은 2층에서 최대 6층까지 제조하였으며 $3{\mu}m$의 두께를 기준으로 Al과 Mg 코팅층의 두께비가 각각 1:1 과 2:1이 되도록 코팅하였다. 6층 이상에서는 코팅층의 두께 제어가 쉽지 않기 때문에 층수는 6층으로 제한하였다.다층형 Al-Mg 코팅층을 주사전자현미경으로 관찰한 결과, Al-Mg 코팅층간의 계면을 관찰할 수 있었다. 또한 글로우방전분광기로 Al-Mg 코팅층을 관찰한 결과, Al과 Mg 코팅층이 균일한 다층 구조를 형성하고 있는 것을 확인할 수 있었다. 다층의 Al-Mg가 코팅된 강판을 염수분무시험을 통해서 내부식 특성을 확인하였다. Al-Mg 코팅 강판의 염수분무시험 결과, Al-Mg 코팅층의 층수가 증가할 수록 내부식 특성이 향상되는 것을 확인할 수 있었으며, 이러한 현상은 Al-Mg 코팅층이 다층으로 형성되어 있어 부식 생성물을 효과적으로 차단하여 강판의 부식을 방지한 것으로 판단된다.

• Journal of Korean Society of Disaster and Security
• /
• v.7 no.2
• /
• pp.17-24
• /
• 2014

Recently, many accidents occur frequently because sprinklers aren't installed or don't work right when there are outbreak of fire in houses and aggregate buildings. Therefore, they can result in damage for humans and loss of property. Sprinklers are the most appropriate which can extinguish buildings' fire in the initial stages. Through lack of legal system, in domestic cases, sprinklers cannot operate their inherent performance. Domestic standard simply classifies installation objects according to types of business and forms of buildings, also divides into uses and floors of buildings. Especially it only regulates that sprinklers must be installed every floors in particular fire buildings that have more than eleven floors. While it doesn't need to install sprinklers below ten floors, so we are threatened the safety. In this study, we derived causes and implications by analyzing concepts of sprinklers facilities, installation standards in domestic and foreign legal system, and recent cases that expanded damages in fire accidents because of weak point of installation and control standards. In domestic cases, as a result, government has to provide an institutional strategy and law that regulate duty to install sprinklers to all aggregate buildings regardless of floors in terms of new buildings. Also, if someone who has existing buildings wanted to install them, government would guarantee subsidy to encourage installation. In addition, government supervises fire-fighting activities when there are fire by compensating standards about regular inspection by a qualified technician, operation and maintenance of sprinklers as well as reinforcement of administrative criteria.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.183-199
• /
• 2008

This study is focused on characterization of the physio-chemical and mineralogical properties, investigation of their vertical changes in the tailing profile of the Guryoung mining area, classification of the profile into distinct zones, and condition conceptual model of physio-chemical conditions and phases-water relationships controlling the element behaviors in the tailings. The upper part of the groundwater is characterized by the high contents of $Fe_2O_3$ and $SO_3$ for whole rock analysis, low pH, and the occurrence of jarosite, schwertmannite and Fe-oxyhydroxide as the secondary mineral phases. The tailing profile can be divided into the covering soil, jarosite zone, Fe-sulfate zone, Fe-oxyhydroxide and gypsum-bearing pyrite zone, calcite-bearing pyrite zone, soil zone, and weathered zone on the based of the geochemical and mineralogical characteristics. The profile can be sampled into the oxidized zone and the carbonate-rich primary zone with the dramatic changes in pH and the secondary mineral phases. The conceptual model proposed for the tailing profile can be summarized that the oxidation of pyrite is the most important reaction controlling the changes in pH, the dissolution of the primary silicates and carbonates, the precipitation of secondary mineral phases, acid-neutralizing, and heavy metal behaviors through the profile.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2779-2788
• /
• 2012

The housing market is now difficult because of excess of the increase rate of housing and long-term recession but high-rise mixed-use buildings can mix residential facilities with various demand facilities focusing and they have the advantages to secure open space and excellent view by high-rise apartment. But there are problems by hindrance of skyline formation and height of buildings. Therefore, the purpose of this study is to suggest the height standard and the slenderness ratio to location types of Mixed-use Residential Tall buildings. For the method of the study, term arrangement through literature search and the precedent research survey were first done, the level of urban design and the details related to the height of buildings were done as the case research focusing on the 16 cases in Seoul. The following results were drawn by suggesting the height standard and the slenderness ratio by location type based on them. First, the height of mixed-use building by location type in the level of urban design gets higher starting from the secondary center of the city and can be suggested as from less than 150m to more than 200m. Second, the slenderness ratio shall be planned as more than 1:3 because the area of the ground level of mixed-use building is large unlike Mixed-use Residential Tall buildings and visual passage shall be placed so that unity of openness and group formation will be planned. Third, for the height related to Mixed-use Residential Tall buildings, amendment of the special architectural district system and the special law related to super high-rise buildings shall be enacted.

• Korean Architects
• /
• no.9 s.353
• /
• pp.74-81
• /
• 1998

건축법이 올 정기국회에서 개정될 예정이다. 이를 위해 건설교통부는 지난 7월 10일 입법예고 하고 법제처 및 관계부처 협의를 진행중인 것으로 알려졌다. 입법예고 내용중 상업지역 공동주택에 대한 일조기준 폐지 및 건축물의 일조기준을 남쪽기준으로 변경, 허가기준 고시, 피난 및 내화 등의 건축기준을 설계기준으로 고시, 사전승인대상(21층이상 10㎡이상)을 시도에서 직접 허가가능토록 하는 등 절차와 기준에 대한 대폭적인 변경이 예상되고 있다. 그러나 무엇보다도 일반인의 관심을 끌었던 것은 일간신문에서 중점보도한 "용도변경이 자유로워져 건축물을 마음대로 사용할 수 있다"와 "건축인허가시 건축사확인으로 허가 가능한 대상이 확대된다"는 것이었다. 따라서 용도변경제도와 허가제도의 개정 내용과 이를 시행시 발생하는 문제점과 함께 개선방안, 선결되어야 할 문제와 관련, 병행해서 개정되어야 할 과제 등을 살펴보고 바람직한 제도개선 방향에 대해서도 제안해 본다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1393-1398
• /
• 2009

Conventionally, etching is first considered for microelectronics fabrication process and is specially important in process of a-Si:H thin film transistor for LCD. In this paper, we stabilize properties of device by development of wet and dry etching process. The a-Si:H TFTs of this paper is inverted staggered type. The gate electrode is lower part. The gate electrode is formed by patterning with length of 8 ${\mu}$m${\sim}$16 ${\mu}$m and width of 80${\sim}$200 ${\mu}$m after depositing with gate electrode (Cr) 1500 ${\AA}$under coming 7059 glass substrate. We have fabricated a-SiN:H, conductor, etch-stopper and photo resistor on gate electrode in sequence, respectively. The thickness of these thin films is formed with a-SiN:H (2000 ${\mu}$m), a-Si:H(2000 ${\mu}$m) and n+a-Si:H (500 ${\mu}$m), We have deposited n-a-Si:H, NPR(Negative Photo Resister) layer after forming pattern of Cr gate electrode by etch-stopper pattern. The NPR layer by inverting pattern of upper gate electrode is patterned and the n+a-Si:H layer is etched by the NPR pattern. The NPR layer is removed. After Cr layer is deposited and patterned, the source-drain electrode is formed. In the fabricated TFT, the most frequent problems are over and under etching in etching process. We were able to improve properties of device by strict criterion on wet, dry etching and cleaning process.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.90-98
• /
• 2016

High-rise buildings construction project have various risk factors. Major risk factors are negative results such as time delay and increase of costs. Therefore, this study was analyzed risk factors in construction stages of high-rise buildings using by PROMETHEE technique. For this, this research were identified risk factors through experts Focus Group Interview(FGI). And, PROMETHEE was used to setup evaluation standard for analysis of high-rise building construction risks. Next, the standard of evaluation index calculation was composed by using the definition level in PDRI. Preference function and evaluation index were identified through questionnaires. Through these processes, this study has calculated the importance of high-rise building construction risks using by PROMETHEE technique. As a result, high degree risk factors were as following. These are 'Operation plan of material lifting', 'Outrigger & Belt Truss Construction', 'Foundation work plan of high-rise building' and 'Considering a Structure concept of high-rise building'.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.526-535
• /
• 1994

For the evaluation of the corrosion behavior of the aluminum cladding in the KMRR(Korea Multipurpose Research Reactor) fuel, a modified Griess correlation was derived by introducing a heat flux factor derived from the comparison of the measured in-reactor corrosion data with the prediction of the Griess correlation. As a design criterion on the corrosion to maintain the KMRR fuel integrity, prevention of the oxide spallation was conservatively selected, which is conservatively assumed to occur when the temperature difference across the oxide layer exceeds 114$^{\circ}C$. A bounding power history of the KMRR fuel was determined by examining all the power histories of the KMRR fuel from cycle 1 to equilibrium cycle, and used to predict the maximum possible corrosion. Results of the corrosion prediction of the KMRR fuel with the bounding power history showed that the maximum local thickness of the oxide layer would be below 50$\mu$m and the design criterion on the oxide spallation would be satisfied with a factor of two margin. Therefore, it can be said that corrosion of the cladding will not impair the integrity of the KMRR fuel. Nevertheless, the applicability of the modified Griess correlation to the KMRR needs to be further verified through the KMRR fuel corrosion surveillance.