• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.150-155
• /
• 2009

Hysteresis current regulator has been used widely because of its simple principle and structure. However, when the current band width is too narrow or the applied voltage is relatively too high, the switching frequency increases abruptly and it makes large amount of heat. In this study, for single phase current control, the hysteresis current control is executed by adding 0 mode state and comparing the slope of the current reference, which decreases the switching frequency so much and make the current control much stable. These were proved with computer simulations.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.108-119
• /
• 1999

In this paper, a three phase PWM AC to DC boost converter that operates with unity power factor and sinusodial input currents si presented. The current control of the converter is based on the space vector PWM strategy with fixed switching frequency and the imput current tracks the reference current within one sampling time interval. Space vector PWM strategy for current control was materialized as a digital control method by using DSP. By using this control strategy low ripples in the output voltage, low harmonics in the input current and fast dynamic responses are achieved with a small capacitance in the dc link.

• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.14-22
• /
• 2000

The estimation of proper prediction method and the alteration of transformation method of environmental regulation standard were carried out by measuring blasting noise in construction field. The correlation of scaled distance with sound pressure level were better than with sound level, but it was proved to be difficult to control blasting noise because the correlation factor was too 1ow. three methods to transform sound pressure levee to sound level were examined. The method is the transformation by correlation equation of sound pressure level and sound level which are measured at the same time, and simplified transformation of A-weighting network corresponding to dominant frequency, and the transformation of sound pressure level by FFT. There were many errors to transform. The best effective method is the transformation using correlation equation of sound pressure level and sound level which are measured at the same time.

• Electronics and Telecommunications Trends
• /
• v.23 no.1 s.109
• /
• pp.99-108
• /
• 2008

3G LTE 이동통신 시스템은 패킷 데이터 전송에 기반을 둔 다양한 서비스 지원을 목표로 하는 기술로서 최대 20MHz 대역폭 기준 하향링크 최대 전송속도 100Mbps, 상향 링크 50Mbps의 전송속도를 지원한다. 그리고 데이터 전송 효율 향상, 효율적인 주파수 자원 이용, 이동성, 낮은 latency, 패킷 데이터 전송에 최적화된 기술과 서비스 품질보장 등을 제공한다. 3G LTE 시스템은 기존 시스템에 비해 주파수 및 고속의 멀티미디어 서비스를 효율적으로 사용하는 IP 네트워크로 진화되는 이동통신 시스템이다. 3G LTE 이동통신 단말은 대역폭 20MHz 기준으로 이동속도 120km/h에서 하향링크 30 Mbps, 상향링크 15Mbps의 데이터 전송속도를 지원한다. 또한, 고품질 및 고속의 멀티미디어 서비스를 제공하는 단말로서 3.5세대인 HSDPA에 반해 모바일 영상 서비스가 본격적으로 제공되는 3G LTE 이동통신 시스템의 단말이다. 본 고에서는 3G LTE 이동통신 시스템 단말 플랫폼 기술 동향과 전망에 대하여 논의한다. II장에서는 3G LTE 표준 규격을 기반으로 구현하는 3G LTE 이동통신 시스템 및 단말 플랫폼을 서술하며, III장에서는 국ㆍ내외 단말 플랫폼 기술 동향에 관한 내용을 기술한다. IV장에서는 향후 발전 전망에 대해 살펴보고, 마지막으로 결론을 맺고자 한다.

• Journal of Korea Multimedia Society
• /
• v.16 no.8
• /
• pp.905-913
• /
• 2013

The Parallel Model Compensation Using Frequency-variant: FV-PMC for noise-robust speech recognition is a method to classify the noises, which are expected to be intermixed with input speech when recognized, into several groups of noises by setting average frequency variant as a threshold value; and to recognize the noises depending on the classified groups. This demonstrates the excellent performance considering noisy speech categorized as good using the standard threshold value. However, it also holds a problem to decrease the average speech recognition rate with regard to unclassified noisy speech, for it conducts the process of speech recognition, combined with noiseless model as in the existing PMC. To solve this problem, this paper suggests a enhanced method of recognition to prevent the unclassified through improving the extent of rating scales with use of maximum likelihood so that the noise groups, including input noisy speech, can be classified into more specific groups, which leads to improvement of the recognition rate. The findings from recognition experiments using Aurora 2.0 database showed the improved results compared with those from the method of the previous FV-PMC.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.137-147
• /
• 2020

This paper proposes printed bow-tie antennas with 3 ~ 5 GHz broadband characteristics were proposed for testing the electromagnetic immunity of automotive electrical components in the 5G frequency band. The antenna get -10 dB bandwidth in the 2.75 ~ 6 GHz frequency band and the broadside radiation pattern with S₁₁ characteristic of -16.2 dB at resonant frequency. In testing electromagnetic immunity in the 5G mobile communication frequency band, the VSWR characteristic remained below 2.1, forming a level of 1 W as proposed by international standards. As a result, it is confirmed that the proposed antenna can be applied to antenna testing for electromagnetic immunity verification in the 5G mobile communication frequency band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.8-12
• /
• 2007

In this paper, we proposed an frequency offset estimation scheme which can be used for packet based OFDM communication systems such as IEEE802.11a and IEEE802.11p physical layer. Proposed estimation scheme can adjust the gain allocation ratio between long training symbol and short training symbol while maintaining average power of overall training sequence so that we can obtain the reference parameters for MSE performance improvement. The preamble structure considered in this paper is based on the preamble specified in IEEE802.11a and IEEE802.11p standardization group. From the simulation results, it is shown that power ratio between long training symbol and short training symbol must vanes for achieving lower frequency offset estimation error as channel SNR condition is changed. Also it is known oat proposed scheme can achieve better performance than conventional one.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1297-1306
• /
• 2012

This work presents a 77 GHz radar transmitter for the automotive radar system. An integrated 13 GHz frequency synthesizer fabricated using 130 nm RF CMOS process drives a commercial W-band compound semiconductor monolithic multifunction amplifier(MPA), which includes a frequency multiplier by six to generate 77 GHz transmitting signal. The 13 GHz frequency synthesizer includes a high efficiency injection buffer of 4 dBm output power to drive the MPA. The output power of 77 GHz radar transmitter is higher than 13.99 dBm and the magnitude of the reference spur relative to the carrier is -36.45 dBc. The phase noise is -81 dBc/Hz at 1 MHz offset frequency from the carrier.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.3
• /
• pp.141-145
• /
• 2024

Because of muscle fatigue, motor unit recruitment and firing rates decrease and EMG power spectrum shifts toward lower frequencies as spectral compression which represented by a falling shift in the median frequency. However, changes of this frequency shows relatively less than those of the magnitudes of the low frequency band. This paper aims to examine the moderate ranges of the frequency bands in the existed ones as spectral fatigue indices of biceps femoris muscle. Twelve subjects participate in this experiment, and EMG signals are measured from these muscles during treadmill walking on the speed of 4.5 km/h. ANOVA analysis is used to compare changes of the low and high frequency band with reference to those of median frequency. Experimental results demonstrate that the low frequency band 25-82 Hz and the high frequency band 142-300 Hz could be appropriate for spectral fatigue indices of biceps femoris muscles.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.333-343
• /
• 2009

The BPF designed by the formula based on strip line shows the center frequency shift and distortion in filter response and this becomes more significant with higher frequency. In this paper, the novel design based on EM simulation is proposed. In the design, the filter is decomposed into individual resonators and, for each resonator, the reactance slope and the inverter values are measured and tuned to desired design values for a inverter BPF prototype. The filter composed with such resonators shows the desired filter response without further tuning. This is because possible effects of discontinuities and dispersion are included in the filter parameter extraction. The method can generally apply to all filters that can be transformed into inverter BPF prototype. The procedure is verified by designing a 5th-order SIR filter and quite general to adapt into the design of a parallel coupled line filter, and hair-pin filter.