• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.161-178
• /
• 2009

The introduction of a world geodetic system for cadastral survey will be started the enactment of the law on survey, hydro-graphical examination and cadastre. However, the cadastral control points are not homogeneous and correspond with national control points because of various reasons. To cope with this problem, the 1,600 high accurate control points, which can be interlocked with national GPS control points, has selected from existing 20,000 cadastral control points. These selected control points were calculated as an accurate world geodetic system and it makes a homogeneous cadastral survey network. Through these measures, for the future carrying out national project, this study will be effectively contributed to establish the cadastral infrastructures for the Korea cadastral reform project.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11a
• /
• pp.314-317
• /
• 2003

지문을 이용한 개인 인증 절차는 지문 형태 별로 구분하는 분류(classification) 과정과 본인임을 확인하는 정합(matching) 과정으로 구분할 수 있다. 지문의 분류와 정합을 위해서는 기존 연구들이 지문의 특징점 수와 방향성의 흐름 패턴에 의존한다. 본 논문에서는 방향성의 흐름 패턴을 이용한 중심점 추출에 초점이 맞춰져 있으며 추출된 중심점 정보는 현재 구현되어진 특징점 추출 정보와 연계해 정합을 위한 기준점으로 활용한다. 기준점을 축으로 생성되어진 직교좌표는 지문 영상의 상ㆍ하, 좌ㆍ우 위치 이동에 대한 영향을 최소화 시켜줌으로써 지문 정합의 정확도를 높여준다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3478-3485
• /
• 2011

This study utilized the GPS data of the stations of triangulation of Changwon-si, Gyeongsangnam-do to conduct comprehensive analysis on tolerance level and regional characteristics. Based on this analysis, it was attempted to seek the method to derive more accurate result when further performing cadastral control point surveying for cadastral detail surveying. For the stations of triangulation installed at time of the land survey project, the study result showed that the most results of the stations of triangulation are stable if they were not moved naturally or artificially by themselves. Therefore, it was concluded that the stations of triangulation installed at the time of the land survey project should be preemptively selected for use of the given points when making decision of result of cadastral control point surveying. In addition, if the result of the cadastral control point surveying is made decision based on the stations of triangulation presented as the stable result in this study result, it seems that the same surveying result will be maintained and managed at all time, even if they are going to be further reinstalled due to loss of them.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.3-13
• /
• 2008

The coordinate of cadastral control points located over the area of different surveying origins is computed in a single surveying origin by trilateration adjustment of GPS baseline measurements. In every different surveying origins, well-matched control points are selected and mutually coinciding coordinates are computed by free network adjustment. Then, the coordinate of the other control points over the area is computed by joining these points to the adjusted points. In practice, by using 18 points of Gari, 17 points of Gyeyang, and 33 points of Central origin in Incheon, the coordinates of total 68 points in every surveying origin are computed. Between the points of different surveying origins, it is found that there are quantitative differences in azimuth and scale factors and the approximate point coordinate of other surveying origins is calculated by correcting the scale and azimuth.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.41-49
• /
• 2007

In this study, the software to compute Bessel coordinates by trilateration adjustment was developed, and the software was used to determine coordinates of the cadastral control points over the southern Korean peninsula. The baseline measured by GPS was reduced to the distance on geoid surface by applying PNU95 geoid model, and the distance on geoid surface was reduced to the plane grid distance by applying scale factor of map projection of Bessel coordinates. Using the plane grid distance, Bessel coordinates of 32 CORS (Continuously Operating Reference Station) were computed by free adjustment at first, and then the coordinates of the cadastral control points were computed by joining the control points to adjacent CORS. The result shows a possibility of construction of highly accurate and consistent cadastral survey network with coordinate error less than 1ppm of distance, when newly computing the coordinates of the control points by using distances measured by GPS.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.499-505
• /
• 2004

현재 국내에서 활발히 이루어지고 있는 GPS 정밀측지측량은 획득된 GPS 관측값의 결과값이 GPS 기준점의 기하학적 강도와 분산계수의 상관관계의 연관성과의 분석없이 사용되고 있는 문제점을 파악하고 육지와 해상의 통합지리정보시스템구축을 위한 수치지도와 전자해도의 통합투영의 필요성에 의해서 이루어졌다. 본 연구의 목적은 크게 GPS 관측값의 정밀도를 향상시키는 방법과 수치지도와 전자해도의 통합투영으로 GPS 기준점들을 이용한 수치지도와 전자해도상의 경계선 오차량을 비교검토를 통해 수치지도와 전자해도의 통합관리의 방향을 제시하는데 있다. GPS 관측값의 정밀도 향상을 위한 방법제시를 위하여 GPS 망조정에 사용되는 3점의 기준점에 대한 기하학적인 강도에 따른 정밀도 분석방법과 분산계수의 변화에 따른 GPS 관측값들의 정밀도 분석방법으로 나누어 검토하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2009

With supply of the domestic digital camera, the relative importance of the digital camera is coming to be high gradually on aerial photogrammetry, the image of digital camera is more applied in image map or digital topographic map production. But, there are cases that do not have position information or attitude information of each photograph in digital camera results. Therefore, we wish to present additional method to get more accurate photograph control point result. In this study, One is called A method, which is the case of entering positioning information of principal point from topographic map as default values that are need to extract tie point automatically using by 56 pieces of photography that are photographed by DMC to the extent to 5 courses and 35 GCP points. The other is called B-method, which is the case of entering exterior orientation parameters that are processed by block adjustment for A-method using by 4 control points in method-1 as default values. We have analyzed about results per control points arrangement for two cases using MATCH-AT that is photograph control point measurement S/W of Germany INPHO company. As a result of analysis, accuracy of B-method was better than that of A-method, and we could get more accurate results if block adjustments are executed including self calibration. Also, it is more effective in expense side that using self calibration for photograph survey in B-method because can reduce GCP numbers.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.79-88
• /
• 2015

In any production and construction of geospatial information covering surveying, survey control point is a vital geospatial information. Survey control points in South Korea are currently classified as following: national control points, public control points, and cadastral control points. Each of these different categories of survey control points act as a basis and sets perimeters for the production, management and operation of subjects within the category. Universal standard, the unified format between different survey control points, also, are not yet defined, causing difference in basic information provided by altering categories and disturbance in connecting, managing, utilizing and operating survey control points. Establishment of a standard regarding survey control points, is therefore required for the efficacy of their utilization. This study, to solve such inadequacies, selects management items for creation of standardized survey control point, by investigating domestically and internationally the status of operating survey control points, determining data model for management, establishing TTA and agency standards, and establishing of activation methodology for survey control point standards.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.141-148
• /
• 2007

With the use of world geodetic system, the UIS DB of WonJu City, which was established on Korea coordinate system becomes to face the need of coordinates transformation. However, the UIS DB of Wonju City is based on dualistic control points of Korea geodetic system, which means the coordinates system is not standardized. Therefore it is required to establish a plan for transformation into world geodetic system. For this purpose, we calculated coordinate transformation coefficients per control point data of Korea geodetic system and verified the accuracy of transformation coefficients. Through the process, we propose a plan for transforming the coordinate system of UIS DB in WonJu City, which has been based on dualistic control point data of Korea geodetic system, efficiently into the world geodetic system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.29-40
• /
• 2002

In photogrammetry, the accuracy is analyzed by using the coordinate of the targeted position determined by the geometric principle, thus, the reliability depends on the accuracy of the coordinate of the targeted position. Thereby, geographic surveying is essential to perform such tasks, and it requires approximately $30{\sim}50%$ of total cost and times to produce a finalized map. The main purpose of this study is to determine the configuration of the disposition of minimum datum points and their configuration, which were determined by surveying values available through using the structure of block model based on the aerotriangulation. ortho projection image was produce and digital topographic map was achieved by the optima model(CASE7). We also performed comparative analysis about the result of local datum point and the accuracy of overlapping based on the surveying results. Consequently, it is possible to analyze the unknown position accurately with the optimal model., CASE 7, which is the minimum datum points configuration required to block adjustment. Furthermore, this optimal model, which provides the minimum datum points, results costs and time saving effects compared to the previous methodology.