• 건축구조
• /
• v.12 no.1
• /
• pp.80-84
• /
• 2005

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.10a
• /
• pp.142-145
• /
• 1998

근권용량을 2, 4, 6, 8 및 10$\ell$로 제한하여 펄라이트를 채워 오이를 재배한 결과 근권용적이 증가할수록 초장, 경경, 엽수 및 엽면적이 증가하였고, 과실수와 과실중량에서는 근권용적이 큰 8$\ell$와 10$\ell$의 처리구에서 가장 양호하였으며 기형과 발생률도 낮은 경향이었다. 근권용적 6$\ell$를 기준으로 미만의 처리구에 비해 이상의 처리구에서 경으로의 건물분배가 줄어들고 엽으로의 건물분배가 많은 것을 볼 수 있었다.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.121-135
• /
• 2018

The ministry of land, Infrastructure and transport has revised the "National Land Planning and Utilization Act" in 2012. As a result, the regulation of floor area ratio for land covering two or more zoning area has been changed. This study conducted an analysis of the policy effects of changes in the criteria for the application of the floor area ratio by revising the "National Land Planning and Utilization Act". Land covering two or more zoning area means a street side commercial area and street side residential area that is generally understood. This study analyzed the policy effects in Gangnam-gu which has relatively large areas of street side commercial area and street side residential area. The 468 office building transaction cases were analyzed in Gangnam-gu from 2007 to 2017. The result shows that the office building, which has received incentive for policy changes, reported a 19.08% rise in price compared to the one that did not. It means that the economic effects of change of application standard were significant. The existing policy also served as a restriction on land use by landowners, which in turn contributed to the devaluation of the asset's intrinsic value. Therefore, this study may have contributed to the rational use of land and to provide an empirical basis for the change in policy to be assessed for its intrinsic value.

• Clinical and Experimental Pediatrics
• /
• v.52 no.11
• /
• pp.1267-1272
• /
• 2009

Purpose:We examined the ability of preschool aged children to meet the American Thoracic Society (ATS) and European Resiratory Society (ERS) goals for spirometry quality and tried to find out the major factor for improving the rate of success of spiromety test in this age group. Methods:Spirometry was performed in 2-6 aged 155 children with chronic cough or suspicious asthma with the recording of maneuver quality measures of forced expiratory time, end-of-test volume, back-extrapolated volume (Vbe), and forced vital capacity (FVC), as well as flow-volume curve. The subjects were tested several times and the two best results in each subject were selected. All criteria for quality control were suggested by ATS/ERS guidelines. The criteria for starting of the test was Vbe <80 mL and Vbe/FVC <12.5%. The criteria for repeatability of the test was that second highest FVC and FEV1 are within 100 ml or 10% of the highest value, whichever is greater. For the criteria for termination of the test for preschool aged children, we evaluated the flow-volume curve Results:As getting older, the success rate of spirometry increased and rapidly increased after 3 years old. Total success rate of the test was 59.4% (2 years old - 14.3%, 3 years old - 53.7%, 4 years old - 65.1%, 5 years old - 69.7%, 6 years old- 70.8%). The percentage of failure to meet the criteria for starting the test was 6.5%, repeatability of the test was 12.3% and end of the test was 31%. There was a significant difference only in age between success group and failure group. Evaluating the quality control criteria of previous studies, the success rate increased with age. Conclusion:About 60% of preschool aged children met ATS/ERS goals for spirometry test performance and the success rate was highly correlated with age. It is clearly needed that developing more feasible and suitable criteria for quality control of spirometry test in preschool aged children.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.81-91
• /
• 2016

The study shows solutions of long-term unexecuted urban park and activation plans to facilitate the business promotion of Private Park Developers. This study conducted a feasibility analysis to determine if the business of a special case is applicable. The result of this study is as follows about three long-term unexecuted urban parks in Gwangju Metropolitan City's City Park. First, the three long-term unexecuted urban parks in Gwangju Metropolitan City's City Park are the forest type Neighborhood Parks. Businesses of a special case's park developing cost(average 0.4%) have a relatively low percentage. It is most affected by Land Compensation(average 33.8%) and building construction expenses(average 59.1%). Second, long-term unexecuted urban parks' Land Compensation and building construction expenses seed capital are excessive. The Bongsan Park balance floor space index is 179 percent; a reasonable profit floor space index is 220 percent. The Mareuk Park balance floor space index is 351 percent; a reasonable profit floor space index is 420 percent. The Jungoe Park balance floor space index is 327 percent; a reasonable profit floor space index is 400 percent. Third, to facilitate the business of special cases in deliberating, Bongsan Park should change its second class general residential area. Jungoe Park must change the quasi-residential area and semi-residential area. Mareuk Park must change the general commercial area. In this way, the feasibility of promoting private park projects will be improved.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.34-42
• /
• 2015

The paper investigates environmental hazards and characteristics of the artificial lightweight aggregate manufactured by using dyestuff sludge from dyeing industrial complex. The dyestuff sludge used in this study is chemically treated with Ti and Fe salt for the purpose of recycling. The artificial lightweight aggregate is manufactured through 3 step; 1) Selecting the optimum moisture content by evaluating plasticity from the mixing ratio of the clay and sludge, 2) shaping round type based on the optimum mixing ratio, 3) drying and Sintering process. Based on KS F 2534 "Lightweight Aggregate for Structural concrete", the particle size, fineness modulus, the density, absorption, unit volume weight, stability and environmental hazards of the manufactured lightweight aggregate are evaluated. Experimental results show that the particle size and fineness modulus is out of the range. However, it is observed that other physical properties are within criteria. In addition, it is confirmed that the problem of the particle size and fineness modulus could be solved in the manufacturing process.

• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.283-293
• /
• 2002

Purpose : A PC based brachytherapy planning system was developed to display dose distributions on simulation images by 2D isodose curve including the dose profiles, dose-volume histogram and 30 dose distributions. Materials and Methods : Brachytherapy dose planning software was developed especially for the Ir-192 source, which had been developed by KAERI as a substitute for the Co-60 source. The dose computation was achieved by searching for a pre-computed dose matrix which was tabulated as a function of radial and axial distance from a source. In the computation process, the effects of the tissue scattering correction factor and anisotropic dose distributions were included. The computed dose distributions were displayed in 2D film image including the profile dose, 3D isodose curves with wire frame forms and dosevolume histogram. Results : The brachytherapy dose plan was initiated by obtaining source positions on the principal plane of the source axis. The dose distributions in tissue were computed on a $200\times200\;(mm^2)$ plane on which the source axis was located at the center of the plane. The point doses along the longitudinal axis of the source were $4.5\~9.0\%$ smaller than those on the radial axis of the plane, due to the anisotropy created by the cylindrical shape of the source. When compared to manual calculation, the point doses showed $1\~5\%$ discrepancies from the benchmarking plan. The 2D dose distributions of different planes were matched to the same administered isodose level in order to analyze the shape of the optimized dose level. The accumulated dose-volume histogram, displayed as a function of the percentage volume of administered minimum dose level, was used to guide the volume analysis. Conclusion : This study evaluated the developed computerized dose planning system of brachytherapy. The dose distribution was displayed on the coronal, sagittal and axial planes with the dose histogram. The accumulated DVH and 3D dose distributions provided by the developed system may be useful tools for dose analysis in comparison with orthogonal dose planning.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.63-69
• /
• 2020

The volume of construction waste material from the entire waste material volume in Korea is approximately 47.3% to take the biggest ratio, and from them, the waste concrete takes up approximately 62.8% that recycling is an urgent issue to address. Therefore, the government recommends more diverse and broader facilitation of the recycled aggregate in order to promote recycling the construction waste materials. In addition, when using concrete recycled aggregate in building, building standard such as floor area ratio and building height are being mitigation. The standard is a condition that mitigation the floor area ratio by up to 15% when using up to 25% of concrete recycled aggregate. Therefore, this study reviewed the relaxation of construction of construction standards when using concrete recycled aggregate in order to actively recommend the use of concrete recycled aggregate. And using the recycled coarse aggregate among the recycled aggregate, the appropriate mixing time in the batch plant according to the substitution rate was derived. In addition, using recycled aggregate admixture in order to improve the drying shrinkage, did comparative analysis about physical and mechanical property of concrete.

• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.439-446
• /
• 2013

The objective of this study is to evaluate the workability and various mechanical properties of heavyweight magnetite concrete and examine the reliability of the design equations specified in code provisions. The main parameters investigated were the water-to-cement ratio and substitution level of normal-weight coarse aggregate (granite) for magnetite. The oven-dried unit weight of concrete tested ranged between 2446 and $3426kg/m^3$. The measured mechanical properties included compressive strength development, stress-strain curve, splitting tensile strength, moduli of elasticity and rupture, and bond stress-slip relationship of concrete. Test results revealed that the initial slump of heavyweight magnetite concrete increased as the substitution level of normal-weight coarse aggregate increases. The substitution level of normal-weight coarse aggregate had little influence on the compressive strength and tensile resistance capacity of heavyweight concrete, while it significantly affected the modulus of elasticity and stress-strain curves of such concrete. The design equations of ACI 349-06 and CEB-FIP provisions mostly conservatively predicted the mechanical properties of heavyweight magnetite concrete, but the empirical equations for modulus of elasticity and splitting tensile strength need to be modified considering the unit weight of concrete.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.649-659
• /
• 2022

This study examined the granite, quartzite, phyllite, schist, and gneiss as aggregate resources among the original rock distributed in the Chungju-Goesan area. The granite distributed in the study area is mainly composed of Jurassic biotite granite, and the quartzite layer is from the Daehyangsan quartzite Formation distributed on the upper part of the Gyemyeongsan Formation and the Hyangsan-ri dolomitic limestone Formation. In addition, phyllite is pophyrytic phyllite-schist from the Hwanggangri Formation of the Okcheon group, schist is chlorite schist, from the Munjuri Formation of the Okcheon group, and gneiss is porphyroblastic gneiss which is the upper part of the Seochangri Formation. Aggregate quality evaluation factors of these rocks included fineness modulus, absorption, unit weight, absolute dry density, solid content, porosity, resistance to abrasion, and soundness. In the case of granite, it was found to be partially unsatisfactory in terms of unit weight, solid content, porosity, and resistance to abrasion. Gneiss was found to be out of the standard values in resistance to abrasion and schist in porosity and solid content. As for the overall quality of aggregate resources, it was analyzed that quartzite, gneiss, and phyllite showed excellent quality. Aggregate quality tests are performed simply for each rock, but the rock may vary depending on the morphology of the mineral. Therefore, when analyzing and utilizing the quality evaluation of aggregate resources, it will be possible to use them more efficiently if the rock-mineralological research is performed together.