• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.52-52
• /
• 2012

최근 선진국을 중심으로 제조기술의 산업혁명이라고 불릴 정도로 큰 파급효과가 기대되는 자기조립기반의 산업공정기술을 확보하기 위한 많은 노력과 연구들이 활발하게 진행되고 있다. 자기조립(Self-Assembly) 현상은 자연에서 일어나는 자발적인 힘으로 원자 또는 분자 단위까지 구조물을 제어하고 bottom-up 방식(상향식: 원자/분자 스케일의 나노구조를 배열/조립하여 원하는 형태의 패턴을 만들어 내는 방식)으로 원하는 구조물을 설계/제작할 수 있는 능력을 가지고 있다. 기초적인 과학으로부터 출발한 자기조립기술은 최근 자기조립 응용개발에서 많은 성과를 이루어내면서 산업화 가능성을 크게 하고, 과학계와 산업계의 많은 관심을 불러일으키고 있다. 반도체 산업기술을 예측하는 ITRS 로드맵(2005년)에 의하면 directed self-assembly 방법이 새로운 미래 패터닝 기술로 개발되어 2016년경에 사용되고, 자기조립소재로 제작된 다양한 응용소자들은 새로운 미래소자로 개발될 것으로 예상하고 있다. 이에 맞추어 국내 기업들도 diblock copolymer를 이용한 나노패터닝 기술 확보를 위한 연구를 진행하고 있다. 또한 IBM은 자기조립기술을 반도체공정에 실험적으로 적용하여 자기조립기술이 생산 공정에 부분적으로 적용될 가능성이 크다는 것을 보여주었다. 산업계와 함께 학계의 연구센터에서는 산업화를 위한 자기조립 집적화 공정(Integrated process) 개발을 이루기 위하여 체계적으로 연구를 실시하고 있다. 미국의 Northeastern 대학의 CHN(Center for high-rate Nanomanufacturing) 연구센터는 자기조립 집적화에 용이한 새로운 개념의 소자를 제안하고 이를 집적화하기 위한 다양한 공정을 개발하고 있으며, Wisconsin 대학의 NSEC(Nanosacle Science and Engineering Center) 연구센터는 diblock copolymer를 이용한 나노패터닝 기술 개발에서 획기적인 결과를 도출하여 산업계에 적용될 가능성을 높이고 있다. 이와 같은 결과들로부터 앞으로의 자기조립기술에 대한 연구는 3차원 구조물을 제작할 수 있는 집적화 공정에 집중될 것이고, 이를 위하여 새로운 개념의 단순한 구조의 응용소자개발도 함께 추진될 것으로 판단된다. 또한 실용 가능성이 큰 집적화 공정으로 개발하기 위하여 기존의 top-down 방식을 접목한 bottom-up 방식의 자기조립 집적화 공정이 개발될 것으로 예상하고 있다. 이와 함께 자기조립공정은 반복되는 구조를 쉽게 제작할 수 있는 장점을 가지고 있어 다양한 응용소자 [태양전지(solar cell), 연료전지(fuel cell), 유연성 있는 전자기기(flexible electronics), 화면표시 장치(display device)] 제작에 쉽게 이용되어 새로운 산업을 창출할 수 있는 가능성을 보이고 있다. 본 자기조립 연구 센터에서는 이와 같은 자기조립 특성을 제조공정에 적용하여 혁신적인 제조공정기술을 확보하고자 연구를 진행하고 있다. 그러므로 본 발표에서 이와 같은 연구 흐름과 함께 본 센터에서 진행하고 있는 자기조립 제조방법을 소개하고자 한다. 이와 함께 자기조립방법을 이용하여 제작된 다양한 응용소자 개발 결과를 발표하고, 이를 top-down 방식과 접목하여 집적화공정으로 개발하는 전략을 함께 소개하고자 한다.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.253-272
• /
• 2015

The necessity of aggregate resources in Korea has been increased with a rapid economic growth since the 1990s. Construction activities have been increased drastically for last two decades. Such economic activities are much concentrated at big cities in Korea, and recently new neighbouring cities, such as multifunctional administrative city, enterprise city and innocity, are under construction at the surroundings of the cities. This new urbanization asked for an appropriate supply of raw construction materials such as cement, sands and gravels. The aim of this study is to understand and discuss the analysis and prospect of supply and demand of domestic sand and gravel. On the early years, 1990s, about 25% of the total consumption of these sands and gravels comes from riverine deposits; 20% to 25% from marine sands, 40% to 45% from forest rocks and the rest 5% to 15% from old fluvial deposits and crushed rocks. But nowaday the river aggregate, including both sands and gravels of a present river channel and those of the old fluviatile system are decreasing, while the crushed and forest aggregates and marine sand are now the main source of infrastructure resources. Thus it is increasingly necessary to investigate the forest and crushed aggregate resources potential in Korea where a current analysis indicate that the supply of riverine aggregates gradually decreases.

• Journal of Service Research and Studies
• /
• v.9 no.2
• /
• pp.41-54
• /
• 2019

The increasing use of mobile applications is a phenomenon that has recently come to be beneficial to people in their private life due to increased income and changes in life style. In particular, analyzing customers' consumer sentiment can be seen as a pursuit form of convenience that enables efficient use of time and effort. In this study, based on previous studies, we examine the causal relation model that influences reuse intention, which is a dependent variable through perceived value as a parameter by measuring the service convenience for cafe mobile application. In order to accomplish purpose of this study, references related to service convenience, perceived value, and reuse intention were reviewed as literature research methods. For the empirical study, the research was carried out through Macro Mill Embrain Co., Ltd. Online research was conducted for one week from October 26 to November 8, 2018. There are 13 items of the collected data were excluded and 324 items suitable for irradiation were used. Study results show that service convenience of cafe mobile application has a positive effect on perceived value and reuse intention. In addition, in the relationship that cafe mobile app's service convenience has a significant (+) influence on reuse intention, perceived value proved to have meaningful results as intermediary roles. Implications of this study are as follows. First of all, this study will be helpful for cafe companies and consumers if utilize the service convenience of cafe mobile application in perceived value and reuse intention in marketing applications. Therefore, theoretically, we propose the development direction of cafe mobile application and present academic data for marketing strategy innovation and competitive advantage in the food service industry that conforms to the fourth industrial revolution era.

• Journal of the Korean Geographical Society
• /
• v.47 no.1
• /
• pp.140-157
• /
• 2012

Most of global citizens in the globalization era want to live peacefully in the symbiotic relationship among each region or locality with its identity. From this perspective, the new regionalist models of development such as new industrial districts, industrial clusters, regional innovation systems, and global city-regions isn't helpful to most of regions because they were developed to increase the global competitiveness of industrial region from a few advanced industrial areas. This study attempts to develop 'regional differential development' as an alternative regional development theory. This theory puts emphasis on the truth that the difference or differential industry between regions in the real world connotes two essential values of development like the symbiosis of global citizens and the regional identity. Regional differential development seeks the development of regional differential industry on the basis of geographical elements with differential advantage, and hence it reviews significantly geographical elements including location, natural environment(landform, soil, climate, etc.), natural resources, population, transportation, culture, and landscape which appear substantially differently among regions. And to realize regional differential development successfully, it is crucial that actors(government, company, related institutions, and regional residents) actively participate and play each complementary role in the relationship of cooperation and conflict. Further study needs to secure the universal validity of this theory through many empirical studies.

• Clean Technology
• /
• v.20 no.4
• /
• pp.439-448
• /
• 2014

The potential mitigation of greenhouse gas (GHG) is studied in the Pohang steel industrial complex (PHSIC). The total GHG emission in 2010 is estimated to be in the range from 4,174,000 to 4,574,000 $tCO_2-eq$ in PHSIC. To meet the target proposed by the government, it is needed to reduce 552,000 $tCO_2-eq$ at minium by 2020. To estimate the potential amount of GHG reduction, the technologies used in the voluntary carbon reduction projects are applied to 51 companies which are subject to GHG target management. From the viewpoint of technological availability and payback period, the fuel conversion and waste heat recovery have an advantage in the short term with a possibility to reduce 160,000 $tCO_2-eq$. In the mid term, the thermal technologies in steel and iron industry have the potential to cut 229,000 $tCO_2-eq$, while the electrical technologies have the potential of 125,000 $tCO_2-eq$ reduction. The gap between the target GHG mitigation and potential reduction using the short and mid term technologies is about 38,000 $tCO_2-eq$, which should be compensated by the fundamental process innovation and the implementation of the most cutting-edge technologies including renewable energy.

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.183-197
• /
• 2018

In the delineation of geological structures using seismic exploration, it is very important to improve resolution of seismic data as well as accurate velocity model building and subsurface imaging. The resolution of seismic data can be enhanced by employing high-frequency energy sources or by applying deconvolution techniques in data processing. In marine seismic exploration, however, the main reason for degradation of resolution is the loss of specific frequency components due to ghosts. If we remove the ghosts, we can obtain broadband seismic data by avoiding frequency loss, and thus providing high-resolution subsurface images. Although ghosts can be properly filtered out in the data processing step, more effective broadband seismic technologies have been developing through the evolution of seismic instruments and the innovation of survey design. Overseas exploration companies developed brand-new configurations of receivers such as over/under streamer and variable-depth streamer, or ghost removal techniques using dual-sensor streamer to serve high-resolution imaging technologies. Unfortunately, neither broadband seismic instrument nor processing technique has been studied in Korea. In this paper, we introduce fundamental theories and current status of broadband seismic technologies to assist domestic researchers to study those technologies.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.195-201
• /
• 2020

COVID-19 is hitting the world. In order to bring about new ways of innovation in the space sector, we need to analyze changes in the space sector and design new challenge strategies. COVID-19 exposes inherent vulnerabilities in the space sector. In particular, COVID-19 is causing supply chain shocks in the space industry, resulting in delays in the supply of systems, subsystems and parts due to a complete or partial interruption of a manufacturing unit. As the overall impact of New Normal on the industry is overall, we continue to look at it in the space sector. COVID is causing supply chain shock in the space industry. It causes a delay in the supply of systems, subsystems and parts due to a complete or partial interruption of a manufacturing unit. In the supply of launch services, the launch schedule is being delayed, but the main launch is still taking place. Demand for major applications such as environmental monitoring is soaring in the earth observation utilization sector. Analyzing the impact on manufacturing, the vendor-based contraction is bringing delays in the supply of systems, subsystems and components, and launch service providers are trying to minimize delays in the launch schedule.

• Proceedings of the CALSEC Conference
• /
• 1999.11a
• /
• pp.159-168
• /
• 1999

오늘날 우리 나라가 당면한 최우선 경제과제중 하나는 물류부문의 혁신을 통한 국가경쟁력 강화라고 할 수 있으며, 이를 위해 정부도 1993년 물류체계 개선을 위한 장기구상으로 ‘화물유통체계 개선 10개년 기본계획’을 수립하여 적극 추진 중에 있다. 그러나 이러한 노력에도 불구하고 PORT-MIS사용자를 상대로 한 설문조사에서는 선박입출항 업무 관련 서류의 40%, 항만시설 사용 업무와 관련된 서류의 31%, 하역업무 관련 서류의 10%만이 EDI를 활용하고 있었다. EDI 활용이 저조한 사유로는 전송시간이 많이 걸리며, EDI 소프트웨어가 작동되지 않으며, 수신확인이 되지 않기 때문이라 응답을 하였다. 이처럼 오늘날 항만물류산업이 겪고 있는 물류 데이타 흐름의 단절적 현상은 시간이 흐를수록 해결될 기미가 보이고 있지 않다. 따라서 본 논문에서는 우리 나라가 겪고 있는 물류관련 업무를 한번의 데이터 입력으로 해결할 수 있는 원스톱 서비스 시스템개발을 목표로 우선 PORT-MIS EDI 업무를 처리할 수 있는 시스템을 구축하였다. 이는 향후 화주, 운송사, 선사, 포워더, 창고업자, 하역회사, 철도청, 화물터미널, 컨테이너 터미널, 해양수산청, 관세청, 출입국관리사무소, 검역소 사이에 서로 교환되는 적하목록, Booking List, 컨테이너 Pick up정보, 위험물 정보, COPINO 정보를 비롯하여 대 관세청 신고 등 수출컨테이너 화물업무의 전반적인 영역으로까지 쉽게 확대할 수 있을 것이다. 본 연구결과 구축된 시스템은 원천정보를 중앙의 통합데이터베이스에 저장하여 이를 사용자의 요구에 의해 인터넷을 통해 전달하는 FTP와 웹 EDI 방식을 결합한 하이브리드 형태이다.인터넷으로 주문처리하고, 신속 안전한 배달을 기대한다. 더불어 고객은 현재 자신의 물건이 배달되는 경로를 알고싶어 한다. 웹을 통해 물건을 주문한 고객이 자신이 물건의 배달 상황을 웹에서 모니터링 한다면 기업은 고객으로 공간적인 제약으로 인한 불신을 불식시키는 신뢰감을 주게 된다. 이러한 고객서비스 향상과 물류비용 절감은 사이버 쇼핑몰이 전국 어디서나 우리의 안방에서 자연스럽게 점할 수 있는 상황을 만들 것이다.SP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projects including scientific and technologica

• Journal of the Korea Society for Simulation
• /
• v.23 no.1
• /
• pp.21-31
• /
• 2014

In this article, data mining simulation is applied to find a proper approach and results of analysis for study of variables related to organization. Also, turnover intention and organizational commitment are used as target (dependent) variables in this simulation. Classification and regression tree (CART) with ensemble methods are used in this study for simulation. Human capital corporate panel data of Korea Research Institute for Vocation Education & Training (KRIVET) is used. The panel data is collected in 2005, 2007, and 2009. Organizational commitment variables are analyzed with combined measure variables which are created after investigation of reliability and single dimensionality for multiple-item measurement details. The results of this study are as follows. First, major determinants of turnover intention are trust, communication, and talent management-oriented trend. Second, the main determining factors for organizational commitment are trust, the number of years worked, innovation, communication. CART with ensemble methods has two ensemble CART methods which are CART with Bagging and CART with Arcing. Comparing two methods, CART with Arcing (Arc-x4) extracted scenarios with very high coefficients of determination. In this study, a scenario with maximum coefficient of determinant and minimum error is obtained and practical implications are presented. Using one of data mining methods, CART with ensemble method. Also, the limitation and future research are discussed.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.3-11
• /
• 2015

The current real estate market is in a state that is considerably shrink due to the recession and long-term reduction of trading. In response, the government recently announced an innovative way for the middle-class residential housing and it is taking the lead to activate the real estate market. Meanwhile, the domestic housing market is entering a transition period, including structural changes of household structure, changes from joeonse to rent increasingly. Also single-member households will rise steeply, so that makes the high demand of small houses. In addition, the domestic construction industry is interested in new technology called Modular building. The Modular construction is an off-site construction system that shorten construction period, eco-friendly building technology and mobility etc, which can be used in various field. Overall, there are two major issues of the current market, one is the change of the real estate market, and the other is the modular construction. This study will propose modular business model in the rental market through the analysis the profitability of the modular business scenarios and IRR analysis.