• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.1-5
• /
• 2010

Many sorts of fatal accidents like explosion or fire caused by gas leakage have become a social issue with the increasing use of harmful chemicals in laboratories in universities and enterprise-affiliated research institutes in Korea. Importance of safety management has been emphasized and it made Act on the Establishment of Safe Laboratory Environment enacted not only to protect lives and bodies of people working in laboratories in universities and enterprise-affiliated research institutes but also to make pleasant experimental atmosphere. Safety management system has been built and periodical checkups and safety diagnosis have been implementing in universities and enterprise-affiliated research institutes to prevent such accidents. However, in spite of those actions, continuous accidents make analysis of root cause essential. This study will show results of analysis on incidents and accidents occurred in laboratories in universities and enterprise-affiliated research institutes using Root Cause Analysis Method and propose the direction of safety management.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.3
• /
• pp.199-208
• /
• 2019

The present study compared the sensory and physicochemical characterizations of Alaska pollock Theragra chalcogramma roe according to the L, M, S, 2S, KA, KB, KC, and G grades. The mean weights of the Alaska pollock roe were 81.2 g (74.1-85.7 g) in the L grade, 48.4 g (41.1-54.8 g) in the M grade, 38.6 g (33.5-45.6 g) in the S grade, 29.3 g (25.7-34.2 g) in the 2S grade, 45.7 g (41.4-50.0 g) in the KA grade, 41.4 g (37.7-46.1 g) in the KB grade, 38.3 g (36.0-42.6 g) in the KC grade, and 15.0 g (14.2-15.6 g) in the G grade. The results of the sensory (transparency, physical damage, texture, and odor) and physicochemical (moisture, amino nitrogen and volatile basic nitrogen contents, Hunter redness, and texture) evaluations revealed that, in the normal group, the quality of Alaska pollock roe was highest in the L grade followed by the M, S, and 2S grades whereas, in the cut-group order, the quality was highest in the KA grade followed by the KB, KC, and G grades. The present results suggest that the L, M, S, 2S, KA, and KB grades could be used for high-quality Alaska pollock roe products.

• The Safety technology
• /
• no.203
• /
• pp.18-20
• /
• 2014

많은 기관들이 안전관리에 적극적으로 나서지 못하는 이유 중 하나가 바로 비용 문제 때문이다. 안전관리 활동이 많아질수록 들어가는 비용은 증가하게 되고, 일부 기관은 비용을 이유로 안전관리활동을 축소하기도 하는 것이 현실이다. 이러한 문제가 해소되기 위해서는 무엇보다 경영진의 의식개선과 안전활동에 대한 안전관리자의 적극적인 노력이 절실하다. 한국기계연구원 부설 재료연구소는 이 점에서 하나의 모범사례와도 같다. 경영진의 뒷받침 속에 안전예산확보, 다양한 안전 프로젝트를 시행하고 있기 때문이다. 재료연구소를 찾아가 안전환경 조성을 위해 어떠한 활동을 펼치고 있는지 이야기를 들어봤다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.221-221
• /
• 2018

국내에 대부분 교량은 빗물이 원활하게 배수되도록 사전에 강우에 대비하여 배수시설을 설계하도록 되어있다. 다수의 교량에서는 점배수와 선배수의 방식을 사용하여 설계 되고 있으나 외부로 노출되어야하는 구조적 문제로 인해 설계시에는 검토되지 않으나 도시미관을 저해하는 요소가 된다. 본 연구에서는 도시미관개선을 위해 교량의 배수시설을 내제한 프리캐스트 교량 방호벽의 개발과 내부에 내제된 배수관의 배수성능을 3차원 모형인 Fluent 모형을 통해 수치해석을 수행하였으며, 교량 측구에서의 흐름 및 횡배수관의 유입에 관해 3차원 흐름을 확인하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.1-7
• /
• 2021

In recent years, automated process technology has allowed for the rapid manufacturing of metal parts. Maintaining high product quality is of vital importance during the production of these parts. Surface defects occurring after processing can compromise their assembly precision and performance. In this study, a deburring tool was developed that can remove burrs generated from drilling. Through the evaluation of processing, burrs were completely removed at entrance and exit surfaces. Therefore, this newly developed deburring tool shows better performance than deburring tools currently in use.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.435-436
• /
• 2019

무선 인터넷은 무선 데이터 통신망을 이용하여 데이터 통신 및 인터넷 서비스를 이용하는 것을 말한다. 무선 통신 기술의 비약적인 발전은 다양한 단말기를 통해서 무선 인터넷 접속을 가능하게 하고있으며, 공간의 제약을 받지 않고 이기종의 단말기 간 통신까지 가능해지고 있다. 본 논문에서는 PC(Personal Computer)와 스마트폰 간의 무선통신을 통한 PC 원격제어가 가능한 모바일 기반의 리모콘 프로그램을 제안한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.7
• /
• pp.53-63
• /
• 2022

Recently, the use of aluminum components in the reduction of the vehicle weight to improve fuel efficiency and reduce carbon dioxide emissions has increased. In the aluminum machining cutting process, hole-making is an important process that accounts for 30% of the machining process. Although many studies have been conducted using the continuously advancing hole processing technology, studies on the machinability of the tool depending on the type of chuck on the workpiece are still lacking. In this study, the machining performance of cemented carbide burnishing drills was compared and analyzed according to chuck type. The burnishing drill was used to create a hole in the AL6061 workpiece, and the surface roughness and dimensional accuracy of the hole were examined according to the type of chuck while monitoring the spindle load.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.2
• /
• pp.23-30
• /
• 2022

After drilling, reaming is required to process a workpiece for obtaining an excellent surface quality. In general, a cermet is defined as a "composite of a ceramic hard phase and metal-bonded phase." Cermets have excellent abrasion resistance, thermal resistance, and performance in finishing operations that require surface roughness and processing precision. However, although cermets have significant advantages, research on them is insufficient. In this study, workpiece SM45C was machined using drills and cermet reamers. The cermet reamer was processed for drag finishing for 0, 4, and 6 min. The experimental results showed the effects of drag finishing on surface roughness and dimensional accuracy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.103-104
• /
• 2022

Cracks may occur in reinforced concrete (RC) structures due to various physical and chemical factors, and the growth of cracks causes deterioration of the structure's performance. It is important to prevent the expansion of cracks through periodic diagnosis of cracks in structures. In order to enable free crack exploration even in a narrow space, a construction robot using a Mecanum wheel that can move up, down, left and right and rotate in place was designed. High-quality crack images were periodically collected through the camera, and the image fragments stored during the exploration were combined into a single photo after the exploration was completed. The robot detected cracks with a width of 0.2 mm or more on the concrete probe surface with an accuracy of about 90% or more.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.255-256
• /
• 2020

생산 현장에서 발생되는 다양한 형태의 데이터는 스마트한 제조관리를 가능하게 하는 원동력으로 이를 효율적으로 저장하고 처리, 분석하는 일련의 과정이 4차 산업혁명 기반의 제조혁신에 능동적으로 대응하기 위한 핵심요소로서, 이와 관련한 다양한 연구들이 활발히 이루어지고 있다. 특히, 제조데이터 분석이라는 영역은 단순하게 기존의 데이터를 통계적인 접근 수단으로만 보는 것이 아니라 다양한 산업별 업종 도메인의 특성에 기반하여 빅데이터 분석과 기계학습 등의 인공지능 모델로 발전하고 있다. 본 논문에서는 다양한 산업별 제조현장을 이해하는 도메인 경험 및 특성을 고려하여 데이터를 효과적으로 저장, 처리, 분석할 수 있는 클라우드 형태의 빅데이터 시스템을 제안한다.