• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.287-297
• /
• 2022

This paper presents experimental and analytical studies on the lateral cyclic behavior of RC columns actively confined with iron-based shape memory alloy (Fe-SMA) strips. Based on the Anexperimental study, we investigated the effectiveness of active confinement through compression testings of concrete cylinders confined by Fe SMA strips and carbon fiber-reinforced polymer (CFRP) sheets. The test results showed that the specimens confined with Fe SMA strips significantly increased the deformation capacity of the concrete, even under lower confining pressures, compared to those specimensconfined with CFRP sheets. The experimental results were used to develop finite-element models of RC columns confined with Fe SMA or CFRP in their plastic-hinge region. After validating the proposed analytical model through comparison with the results from a previous RC column test, a series of lateral cyclic load analyses were carried out for the RC columns confined with Fe SMA and CFRP. The analytical results revealed that the lateral cyclic behavior of the Fe SMA-confined column was greatly enhanced in terms of deformation and energy dissipation capacities compared with tothat of the as-built and CFRP-confined columns.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.1
• /
• pp.67-75
• /
• 2007

The purpose of the study is to develop handheld learning tool based on design principles drawn from cognitive load theory. To optimize learner's cognitive load, the learning program should be developed for maximizing the effective load and(or) minimizing ineffective load. The principles, which were applied to developing the learning program, for minimizing the extraneous cognitive load, one of the ineffective loads, are modality, redundancy, split-attention, multimedia, and worked-out example. In this study, we will show possibilities for designing an effective mobile learning program.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.101-110
• /
• 1995

In SMA(Shape Memory Alloy), the degradation by fatigue is one of the most important problems to be overcome, when SMA is used for robot-actuator materials. The actuator is operated repetitively for long time and its repeating operation develops the fatigue degradation of SMA. The fatigue degradation changes the transformation temperature and deformation behavior and results in inaccurate operation and deformation which results form repeating operation is to be investigated in advance and the scheme to resolve those problems have to be made for the design of actuator. In this paper, for the improvement of the fatigue degradation by repetive movement and better control of the correct movement by the stability of martensite transformation in the development of Robots actuator, Pre-strain(0, 1.5, 5, 8%) are loaded in the specimens and fatigue testing were carried out by the method of heating and cooling in direct condition. From the results of these experiments, the effect on pre-strain which affect the transformation characteristic and fatigue degradation phenomena were correctly investigated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1315-1320
• /
• 2005

TiNi alloy fiber was used to recover the original shape of materials using its shape memory effect. The shape memory alloy plays an important role within the metal matrix composite. The shape memory alloy can control the crack propagation in metal matrix composite, and improve the tensile strength of the composite. In this study, TiNi/A16061 shape memory alloy(SMA) composite was fabricated by hot press method, and pressed by a roller for its strength improvement. The four kinds of specimens were fabricated with $0\%,\;3.2\%,\;5.2\%\;and\;7\%$ and volume fraction of TiNi alloy fiber, respectively. A fatigue test has performed to evaluate the crack initiation and propagation for the TiNi/A16061 SMA composite fabricated by かis method. In order to study the shape memory effect of the TiNi alloy fiber, the test has also done under both conditions of the room temperature and high temperature. The relationship between the crack growth rate and the stress intensity factor was clarified for the composite, and the cold rolling effect was also studied.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.212-217
• /
• 2003

The memory effect of silver and aqua regia in the vessel by their permeation was studied during the microwave digestion of samples under the operating conditions of high temperature and pressure. The extent of permeation in vessels with the solution containing silver 5 mg has been shown to be $0.97{\mu}g/mL$ for the digestion of $HNO_3$ solution and $0.47{\mu}g/mL$ for the digestion of oil sample under condition of MDS 180T program ($180^{\circ}C$, 220 psi).

• Korean Journal of Pharmacognosy
• /
• v.41 no.3
• /
• pp.196-203
• /
• 2010

Black sesame (Sesami semen nigrum) has been used to treat dizziness, earnoise, constipation in the traditional Chinese medicine. In the present study, we assessed memory enhancing properties of 70% ethanolic extract of black sesame (EBS70) and its ameliorating activities on learning and memory impairments induced by scopolamine. Drug-induced amnesia was made by scopolamine treatment (1 mg/kg, i.p.). Single EBS70 (200 mg/kg, p.o.) administration significantly enhanced cognitive function and attenuated scopolamine-induced cognitive impairments as determined by the passive avoidance and Y-maze tasks (P<0.05) and also reduced escape-latency on the Morris water maze task (P<0.05). In addition, EBS70 increased BDNF expression in hippocampus 4 h after its administration (P<0.05). These results suggest that EBS70 enhances learning and memory in normal state and attenuates amnesic state caused by cholinergic dysfunction.

• Korean Journal of Food Science and Technology
• /
• v.47 no.3
• /
• pp.380-387
• /
• 2015

The anti-amnesic effect of Artemisia argyi H against trimethyltin (TMT)-induced learning and memory impairment and its neuroprotective effect against $H_2O_2$-inducedoxidative stress were investigated. Cognitive behavior was examined by Y-maze and passive avoidance test for 4 weeks, which showed improved cognitive functions in mice treated with the extract. In vitro neuroprotective effects against $H_2O_2$-induced oxidative stress were examined using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium-bromide and lactate dehydrogenase (LDH) assays. A. argyi H. extract showed protective effects against $H_2O_2$-induced neurotoxicity; moreover, LDH release into the medium was inhibited. Finally, high-performance liquid chromatography (HPLC) analysis showed that eupatilin and jaceosidin were the major phenolic compounds in A. argyi H. extract. These results suggest that A. argyi H. could be a good source of functional substances to prevent neurodegenerative diseases.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.951-956
• /
• 1997

Vacuum Hot Pressing을 이용하여 제조한 TiNi형상기억섬유 강화 6061 AI기지 복합재료를 제조하고 미세조직 및 기계적 특성 등을 연구하였다. 제조된 복합재의 항복응력은 예비변형량, 섬유체적율 및 열처리에 따라 증가하였다. 복합재의 지적특성은 예비변형이 가하여진 후 재가열되었을 때 기지 내 TiNi 섬유의 형상기억효과에 의한 압축잔류응력 발생에 기인된다. 미세조직 관찰 섬유와 기지 사이에는 AI$_{3}$Ti및 AI$_{3}$Ni의 금속간화합물층이 관찰되었다. 또한 시험온도 증가와 더불어 TiNi섬유강화된 복합재의 유동강도는 높은 값을 나타내었다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.670-674
• /
• 2002

In the recent years, as the research and the development of micro and precision machinery become active, the interest of micro actuators using SMA(Shape Memory Alloy) has been increased. The dynamic characteristic analysis of SMA is necessary for actuator application and many common researches report the material characteristics of SMA sufficiently. However, the research on dynamic characteristics is very deficient. In this paper, the helical spring are fabricated with NiTi SMA wire of high resistivity. The force, response speed, temperature, and displacement are measured by digital force gauge, infrared thermometer, and laser displacement sensor so that the dynamic characteristics of this SMA is analyzed. Also, bidirectional actuator was fabricated and experimented for its performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.25-31
• /
• 2001

The theoretical modeling to predict the modulus of elasticity by the shape memory effect of dispersed particles in a metal matrix composite was studied. The modeling approach is based on the Eshelbys equivalent inclusion method and Mori-Tanakas mean field theory. The calculation was performed on the TiNi particle dispersed Al metal matrix composites(PDMMC) with varying volume fractions and prestrains of the particle. It was found that the prestrain has no effect on the Yonugs modulus of PDMMC but the volume fraction does affects it. This approach has an advantage of definite control of Youngs modulus in PDMMCs.