• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.891-894
• /
• 2008

This study was performed to investigate how to design, where to construct, why to degrade, what plan to use systematically the underground structures such as underpass, underground passageways. About 50% of the underground structures are located on Seoul, Kyungi-Do. In design of the underground structures such as underpass, underground passageways, the required conditions are defined. And also in construction stage, the conditions of soil, required structure depth, site characteristics, reasonable construction method, are investigated. In the selection of details for underground structure, the items mainly considered, are the wall and column type, the sidewalk type, anchoring-system type, the water-proofing method, entranc shape. The reason and the adequate measures for the degradation of concrete structure are also investigated. The initial cracking properties due to the thermal characteristic are considered. The state of the art report on the new technologies are reviewed. The recent project for the systematically application to the underground structures is reviewed.

• Korean Journal of Childcare and Education
• /
• v.11 no.3
• /
• pp.103-127
• /
• 2015

This study is based on the criticism against life contempt tendency in the educational environment of our society. The purpose of this study is to find out the perception and expectation about the realities and formations of partnership between the home and early childhood educational setting of parents and teachers. The ultimate aim is to build a foundation which transforms educational settings into warm educational communities. The research participants were 4 mothers whose children attended the setting and 4 teachers of the early childhood educational setting (8 participants in total). The research results were as follows. The perception of the realities about partnership of parents and teachers was sub-categorized into four categories: 1)"partnership": essential aspect in children's positive development, 2) practicing with vague concepts, 3) lacking the awareness of companion or partnership, 4) disturbing cooperation between parents and teachers from external issues and problems. The expectation of parents and teachers about formation of partnership between home and early childhood educational setting was sub-categorized into five categories: 1) building of community consciousness for better partnership, 2) developing empathy and communication skills between parents and teachers for mutual understanding, 3) considering various strategies to promote partnership with different styles of parents, 4) activating teacher training and parent education in link with local universities and on-line, 5) providing support from the national level to establish new relationships between home and educational settings. Consequently, it will lead early childhood education settings to be transformed into warm educational communities which orientate respect for life.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.59-66
• /
• 2007

The digital working environment and its related technology have been rapidly expanding. In the surveying field, we have changed from using optical film cameras and plotters to digital cameras, multi sensors like GPS/INS etc,. The old analog work flow is replaced by a new digital work flow. Accurate data of the land is used in various fields, efficient utilization and management of land, urban planning, disaster and environment management. It is important because it is an essential infrastructure. For this study, LiDAR surveying was used to get points clouds in the study area. It has a high vegetation penetrating advantage and we used a digital process from planning to the final products. Contour lines were made from LiDAR data and compared with national digital base maps (scale 1/1,000 and 1/5,000). As a result, the accuracy and the economical efficiency were evaluated. The accuracy of LiDAR contour data was average $0.089m{\pm}0.062\;m$ and showed high ground detail in complex areas. Compared with 1/1,000 scale contour line production when surveying an area over $100\;km^2$, approximately 48% of the cost was reduced. Therefore we prepose LiDAR surveying as an alternative to modify and update national base maps.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_3
• /
• pp.1077-1093
• /
• 2020

Sea Surface Temperature (SST) is an important environmental indicator that affects climate coupling systems around the world. In particular, coastal regions suffer from abnormal SST resulting in huge socio-economic damage. This study used Long Short Term Memory (LSTM) and Convolutional Long Short Term Memory (ConvLSTM) to predict SST up to 7 days in the south sea region in South Korea. The results showed that the ConvLSTM model outperformed the LSTM model, resulting in a root mean square error (RMSE) of 0.33℃ and a mean difference of -0.0098℃. Seasonal comparison also showed the superiority of ConvLSTM to LSTM for all seasons. However, in summer, the prediction accuracy for both models with all lead times dramatically decreased, resulting in RMSEs of 0.48℃ and 0.27℃ for LSTM and ConvLSTM, respectively. This study also examined the prediction of abnormally high SST based on three ocean heatwave categories (i.e., warning, caution, and attention) with the lead time from one to seven days for an ocean heatwave case in summer 2017. ConvLSTM was able to successfully predict ocean heatwave five days in advance.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.107-107
• /
• 2009

모듈 형 터빈 다이아프람은, 아우터 링(outer ring), 스팀 패스(steam path)와 이너 웹(inner web)의 원형 형상을 갖는 세 부분을 조립하여 원주 방향의 용접 조인트를 형성하는 기존의 다이아프람 형태가 아니라, 아우터 슈라우드(outer shroud), 베인(vane)과 이너 슈라우드(inner shroud)의 세 부분이 하나의 모듈을 이루고 이러한 모듈을 원주 방향으로 조립하여 방사 방향의 조인트를 형성한다. 전자빔 용접은 이와 같은 방사 방향의 조인트를 수직으로 가로지르는 용접 궤적을 따라 진행되며, 용접 패스에 따라 형성되는 용융 비드의 단면적만큼 인접하는 두 모듈을 접합시킨다. 이 경우 용융 비드의 단면적과 형상은 두 모듈의 결합 강도를 결정하는 중요한 요소가 되어, 제작 시 다이아프람의 크기와 두께에 따라 용입 깊이와 평균 단면 비드 폭을 규정하고 있다. 본 연구에서는 용입 깊이와 단면 비드 폭의 요구 조건을 만족하면서 결함이 없는 건전한 용접부를 얻을 수 있는 최적 용접 조건을 도출하는데 그 목적이 있다. 이를 위해 플레이트 시편과 모듈 시편을 사용한 기초 실험과 유사 시제품(semi-mockup) 실험을 실시하였다. 플레이트 기초 실험을 통해 전자빔 주요 변수인 빔 전류, 초점 위치, 용접 속도, 빔 진동 폭 변화에 따른 용융 비드 형상 변화를 관찰하였고, 빔 전류가 용입 깊이에 가장 큰 영향을 주는 인자임을 확인하여 요구 용입 깊이 별 적정 빔 전류 값을 설정하였다. 용접 속도는 생산성 측면에서 균열이 발생하지 않는 범위에서 가능하면 가장 큰 값을 사용하였고, 빔 진동 폭은 초점 위치와 함께 단면 비드 형상 결정에 많은 영향을 주는 인자로 확인되어 균열이 없는 가장 이상적인 단면 비드 형상인 완만한 쐐기 형태가 되도록 설정하였다. 이 후 실제 제품 폭과 용접 패스를 갖는 블록 모듈 실험을 통해 설정 용접 변수의 적용성과 균열 발생 여부를 확인하였고, 이 때 적용 제품 폭이 30 mm 이하이며 요구 용입 깊이가 50 mm 이상의 경우에서 비드 중앙부 균열이 발생함을 관찰하였다. 따라서 해당 영역의 제품에는 균열 저항성이 높도록 용접 속도와 빔 진동 폭을 줄여 최적 용접 변수를 새롭게 설정하였으며, 이를 유사 시제품 실험에 적용하여 최종적으로 용접 변수 안정성을 검증하였다. 이러한 실험을 통해 확인된 최적 용접 조건을 실 제품 제작에 적용하여 모듈 형 터빈 다이아프람 전자빔 용접 제작을 성공적으로 완료할 수 있었다.

• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.279-288
• /
• 2001

Jointed rock mass can be analyzed by either continuum model or discontinuum model. Finite element method or finite difference method is mainly used for continuum modelling. Although discontinuum model is very attractive in analyzing the behavior of each block in jointed blocky rock masses, it has shortcomings such that it is difficult to investigate each joint exactly with the present technology and the amount of calculation in computer becomes trio excessive. Moreover, in case of the jointed blocky rock mass which has more than 2 dominant joint sets, it is impossible to model the behavior of each block. Therefore, a model such as ubiquitous joint model theory which assumes the rock mass as a continuum, is required. In the case of tunnels, unlike slopes, it is not easy to obtain safety factor by utilizing analysis method based on limit equilibrium method because it is difficult to assume the shape of failure surface in advance. For this reason, numerical analyses for tunnels have been limited to analyzing stability rather than in calculating the safety factor. In this study, the behavior of a tunnel excavated in jointed rock mass is analyzed numerically by using ubiquitous joint model which can incorporate 2 joint sets and a method to calculate safety factor of the tunnel numerically is presented. To this end, stress reduction technique is adopted.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.77-85
• /
• 2009

This study is aimed at providing information on injury prevention and skill improvement by inducing the accurate movements in exercise as well as understanding the principles of badminton drive movements. Movement displacement of racket head showed the similar patterns among those surveyed but, it seemed that slight differences resulted from external factors such as height, length of brachial and forearm and individual trend of swing locus. Regarding upper joint angle per phase, the angles of shoulder joint, elbow joint and wrist joint were closely associated in taking drive movements and they supported the segment order theory that power was conveyed from proximal into distal. It was shown that angular velocity of upper joint became larger in follow through movement after impact among all those surveyed, which meant the importance of follow through in racket sports such as badminton. In conclusion, this follow through movement acts as an important factor in racket sports in terms of pose stability maintenance, pose correction of movements and injury prevention of joints. In summary, when swings are made according to segment order theory, efficient movements can be taken.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.119-130
• /
• 2011

On the point of data quality management, data quality is influenced by quality policy, quality organization, business process, and business rule. Business rules, guide of data manipulation, have effects on data quality directly. In case of building an integration database among distributed databases, defining business rule is more important because data integration needs to consider heterogeneous structure, code, and data standardization. Also data value has various figures depended on data type, unit, and transcription. Finally, database structure and data value problem have to be solved to improve data quality. For handling them, it is needed to draw database integration model and cleanse data in integrated database. NTIS(stands for National science and Technology Information Service) has an aim to serve users who need all information about national R&D by internet, and for that aim, it has a integrated database which has been made with several database sources. We prove that database integration model and data cleansing are needed to build a successful integrated database through NTIS case study.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.165-175
• /
• 2007

The mobile agent executes a given task by which the agent code moves to the server directly. Therefore, node migration method becomes an important factor which impact on the whole performance of distributed system. In this paper, we propose an adaptive migration path technique of mobile agent using the metadata of naming agent. In this proposed technique, node selection for migration depends on the content of referenced metadata, and the reliability of migrated information is determined by the metadata updating method and cooperative operations of individual agents in multi-agents system. For these, we design the metadata using by the number of hit documents, hit ratio, node processing time and network delay time, and describe the methods for creating, using and updating metadata for which determine the adaptive node migration path of mobile agent according to the cooperation of individual agents and number of hit documents using by designed metadata. And results of evaluated performance for proposed adaptive migration path technique through the proper experiment and analysis gain rate of high effective information earning, because of high hit ratio(72%) about of fathered documents by case of applying metadata move to the 13 nodes. But, in case of non-applying metadata is hit ratio(46%) of gathered documents and rate of effective information earning about of 26 nodes is 36.8%.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.287-292
• /
• 2018

The digital multimedia environment, centered on Information and Communications Technologies (ICT) technology, has transformed our imagination into a diverse experience. The flexible display, which was born as a means of human-machine communication required in a highly information-oriented society, It is creating a new market by linking with Internet of things. ecause the interface of a flexible display can provide a physical form as a result of input or output, user-centered interface design is paramount. Therefore, the researchers of this paper have studied the physical deformation and characteristics of flexible display by user manipulation through literature and case studies. Therefore, the authors of this paper studied the physical deformations and characteristics of flexible displays by user manipulation through literature and case studies. This research suggests the following guidelines for a flexible display interface design for the user experience. First, it must be designed to provide the functionality that users need in a variety of display environments. Second, in using the interface, external factors should be removed from the viewing angle of multi-users. Third, all possible user actions should be considered on flexible displays other than touch and contact. Fourth, flexible design of flexible display requires changing interface design for user experience.